Chemical Properties of Ethane, 1,1-dichloro- (CAS 75-34-3)

Ethane, 1,1-dichloro-

InChI
InChI=1S/C2H4Cl2/c1-2(3)4/h2H,1H3
InChI Key
SCYULBFZEHDVBN-UHFFFAOYSA-N
Formula
C2H4Cl2
SMILES
CC(Cl)Cl
Molecular Weight1
98.96
CAS
75-34-3
Other Names
  • 1,1-Dichloorethaan
  • 1,1-Dichloraethan
  • 1,1-Dichlorethane
  • 1,1-Dichloroethane [R 150a]
  • 1,1-Dicloroetano
  • 1,1-dichloroethane
  • Aethylidenchlorid
  • Assymmetrical Dichloroethane
  • CH3CHCl2
  • Chlorure d'ethylidene
  • Cloruro di etilidene
  • Dichloromethylmethane
  • Ethylidene dichloride
  • NCI-C04535
  • R-150a
  • REFRIGERANT-150A
  • Rcra waste number U076
  • UN 2362
  • ethylidene chloride
  • freon 150a
Cheméo is a service of Céondo GmbH, since 2007, we provide simulation, modelling and software development services for the industry. Do not hesitate to contact us for your projects.

Physical Properties

Property Value Unit Source
ω [0.2400; 0.2480]   Show Hide
ω 0.2480 PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
ω 0.2440 ChemSep v8.3 pure component data Compiled value
ω 0.2400 KDB
ΔcH°liquid -1246.80 ± 8.40 kJ/mol NIST Smith, Bjellerup, et al., 1953
Reanalyzed by Cox and Pilcher, 1970, Original value = -1244. ± 8. kJ/mol
μ [2.00; 2.06] debye Show Hide
μ 2.06 debye ChemSep v8.3 pure component data Compiled value
μ 2.00 debye KDB
ΔfG° [-73.14; -72.59] kJ/mol Show Hide
ΔfG° -72.59 kJ/mol ChemSep v8.3 pure component data Compiled value
ΔfG° -73.14 kJ/mol KDB
ΔfH°gas [-132.50; -127.40] kJ/mol Show Hide
ΔfH°gas -127.40 ± 1.10 kJ/mol Active Thermochemical Tables 1.112, gas-phase enthalpies of formation Compiled value
ΔfH°gas -129.41 kJ/mol ChemSep v8.3 pure component data Compiled value
ΔfH°gas -130.00 kJ/mol KDB
ΔfH°gas -132.50 ± 3.50 kJ/mol NIST Manion, 2002
employed hydrochlorination equilibrium measurements of Levanova, Treger, et al., 1976 with increased uncertainty to reflect other data
ΔfH°gas -127.60 ± 1.10 kJ/mol NIST Lacher, Amador, et al., 1967
Reanalyzed by Cox and Pilcher, 1970, Original value = -128. ± 1.1 kJ/mol; At 250C
ΔfH°liquid -163.30 ± 3.50 kJ/mol NIST Manion, 2002
derived from recommended «DELTA»fHgas° and «DELTA»vapH°
ΔfusH° 5.81 kJ/mol Joback Calculated Property
ΔvapH° [30.60; 30.83] kJ/mol Show Hide
ΔvapH° 30.77 kJ/mol NISTMajer and Svoboda, 1985
ΔvapH° 30.83 ± 0.08 kJ/mol NIST Manion, 2002
weighted average of several measurements plus a correction for non-ideality
ΔvapH° 30.62 ± 0.14 kJ/mol NISTLaynez and Wadso, 1972
ΔvapH° 30.60 ± 0.10 kJ/mol NISTLaynez, Wadsö, et al., 1972
IE [11.02; 11.23] eV Show Hide
IE 11.04 ± 0.02 eV NISTN/A
IE 11.02 eV NISTBerman, Anicich, et al., 1979
IE 11.06 eV NISTBerman, Anicich, et al., 1979
IE 11.23 ± 0.02 eV NIST Katsumata and Kimura, 1975
Vertical value
log10WS [-1.29; -1.29]   Show Hide
log10WS -1.29 Aq. Solubility Prediction
log10WS -1.29 Estimated Solubility
logPoct/wat 1.810 Crippen Calculated Property
McVol 63.520 ml/mol McGowan Calculated Property
NFPA Fire 3 KDB
NFPA Health 2 KDB
Pc [5060.00; 5100.00] kPa Show Hide
Pc 5060.00 kPa IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 10 Compiled value
Pc 5066.25 kPa PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Pc 5100.00 kPa ChemSep v8.3 pure component data Compiled value
Pc 5070.00 kPa KDB
Pc 5061.00 ± 10.00 kPa NIST Garcia-Sanchez and Trejo Rodriguez, 1987
Visual, mean of four samples. R150a
Ptriple 2.21e-03 kPa ChemSep v8.3 pure component data Compiled value
Inp [541.00; 601.60]   Show Hide
Inp 592.20 NIST Wang, Liu, et al., 2005
30. m/0.25 mm/0.25 «mu»m
Inp 593.30 NIST Wang, Liu, et al., 2005
30. m/0.25 mm/0.25 «mu»m
Inp 601.60 NIST Wang, Liu, et al., 2005
30. m/0.25 mm/0.25 «mu»m
Inp 598.90 NIST Wang, Liu, et al., 2005
30. m/0.25 mm/0.25 «mu»m
Inp 594.20 NIST Wang, Liu, et al., 2005
30. m/0.25 mm/0.25 «mu»m
Inp 590.60 NIST Wang, Liu, et al., 2005
30. m/0.25 mm/0.25 «mu»m
Inp 585.90 NIST Wang, Liu, et al., 2005
30. m/0.25 mm/0.25 «mu»m
Inp 560.00 NIST Dewulf, Van Langenhove, et al., 1997
30. m/0.53 mm/5.0 «mu»m, He
Inp 564.00 NIST Villalobos, 1995
30. m/0.32 mm/0.96 «mu»m
Inp 568.00 NIST Castello and Gerbino, 1988
He, Chromosorb W DMCS; Column length: 3. m
Inp 570.00 NIST Castello and Gerbino, 1988
He, Chromosorb W DMCS; Column length: 3. m
Inp 566.00 NIST Castello and Gerbino, 1988
He, Chromosorb W DMCS; Column length: 3. m
Inp 553.00 NIST White, Hackett, et al., 1992
100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C
Inp 600.00 NIST Zilka and Matucha, 1978
Ar, Supelcoport, 8. K/min; Column length: 2. m; Tstart: 40. C
Inp 541.00 NIST Huang, Liang, et al., 1996
36. m/0.25 mm/0.25 «mu»m, 5. K/min; Tstart: 35. C; Tend: 240. C
Inp 568.00 NIST Zenkevich, 2003
Program: not specified
Inp 568.00 NIST Zenkevich, 2001
Program: not specified
Inp 559.00 NIST Flanagan, Streete, et al., 1997
60. m/0.53 mm/5. «mu»m, He; Program: 40C(6min) => 5C/min => 80C => 10C/min => 200C
Inp 579.00 NIST Sorimachi, Tanabe, et al., 1995
He; Column length: 30. m; Program: not specified
Inp 559.00 NIST Strete, Ruprah, et al., 1992
60. m/0.53 mm/5.0 «mu»m, Helium; Program: 40 0C (6 min) 5 0C/min -> 80 0C 10 0C/min -> 200 0C
Inp 563.00 NIST Strete, Ruprah, et al., 1992
60. m/0.53 mm/5.0 «mu»m, Helium; Program: not specified
Inp 563.00 NIST Ramsey and Flanagan, 1982
Program: not specified
Inp 553.00 NISTMSDC-RI
Inp 568.00 NISTMSDC-RI
Inp 563.00 NISTMSDC-RI
Ip [881.00; 901.48]   Show Hide
Ip 901.00 NIST Villalobos, 1995
30. m/0.32 mm/0.54 «mu»m, He
Ip 900.52 NIST Castello and Gerbino, 1988
He, Chromosorb W DMCS; Column length: 3. m
Ip 901.48 NIST Castello and Gerbino, 1988
He, Chromosorb W DMCS; Column length: 3. m
Ip 886.92 NIST Castello and Gerbino, 1988
He, Chromosorb W DMCS; Column length: 3. m
Ip 881.00 NIST Ramsey and Flanagan, 1982
Program: not specified
Ip 901.00 NISTMSDC-RI
S°liquid 211.75 J/mol×K NISTLi and Pitzer, 1956
Tboil [273.15; 331.15] K Show Hide
Tboil 330.45 K ChemSep v8.3 pure component data Compiled value
Tboil 330.50 K KDB
Tboil 330.50 K NISTWeast and Grasselli, 1989
Tboil 330.44 ± 0.20 K NISTWisniak and Tamir, 1988
Tboil 330.44 ± 0.20 K NISTWisniak and Tamir, 1988, 2
Tboil 330.44 ± 0.20 K NISTWisniak and Tamir, 1988, 3
Tboil 330.25 ± 0.20 K NISTKovac, Svoboda, et al., 1985
Tboil 330.40 K NISTMajer and Svoboda, 1985
Tboil 330.50 ± 0.50 K NISTNewitt and Weale, 1951
Tboil 330.45 ± 0.30 K NISTMumford and Phillips, 1950
Tboil 330.55 ± 0.20 K NISTBarton and Howlett, 1949
Tboil 330.60 ± 0.50 K NISTSauer and Hadsell, 1948
Tboil 330.40 ± 0.50 K NISTLecat, 1947
Tboil 331.00 ± 7.00 K NISTSchmerling, 1946
Tboil 330.46 ± 0.20 K NISTMaryott, Hobbs, et al., 1941
Tboil 330.20 ± 0.20 K NISTGross, 1929
Tboil 330.40 ± 0.50 K NISTLecat, 1927
Tboil Outlier 273.15 ± 0.50 K NIST Lecat, 1927, 2
Data excluded from overall average
Tboil 330.50 ± 0.30 K NISTTimmermans, 1911
Tboil 331.15 ± 2.00 K NISTWeegmann, 1888
Tboil 330.00 ± 2.00 K NISTSchiff, 1884
Tc [523.00; 523.40] K Show Hide
Tc 523.40 K IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 10 Compiled value
Tc 523.00 K PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Tc 523.00 K ChemSep v8.3 pure component data Compiled value
Tc 523.00 K KDB
Tc 523.40 ± 0.20 K NIST Garcia-Sanchez and Trejo Rodriguez, 1987
Visual, mean of four samples. R150a
Tfus [174.00; 176.70] K Show Hide
Tfus 176.20 K Jean-Claude Bradley Open Melting Point Dataset (2014, CC0) Compiled value
Tfus 176.19 K ChemSep v8.3 pure component data Compiled value
Tfus 176.19 K KDB
Tfus 176.20 K Aq. Solubility Prediction
Tfus Outlier 174.00 ± 1.50 K NISTVan de Vloed, 1939
Tfus 176.70 ± 1.00 K NISTTimmermans, 1935
Tfus 176.50 ± 0.30 K NISTTimmermans, 1911
Ttriple [176.18; 176.19] K Show Hide
Ttriple 176.19 K Staveley, Lobo and Calado (1981), triple points Compiled value
Ttriple 176.19 K ChemSep v8.3 pure component data Compiled value
Ttriple 176.18 ± 0.02 K NISTLi and Pitzer, 1956
UQi 2.53 ChemSep v8.3 pure component data Compiled value
URi 2.96 ChemSep v8.3 pure component data Compiled value
Vc [0.236; 0.240] m3/kmol Show Hide
Vc 0.236 m3/kmol IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 10 Compiled value
Vc 0.240 m3/kmol PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Vc 0.236 m3/kmol ChemSep v8.3 pure component data Compiled value
Vc 0.236 m3/kmol KDB
Zc [0.2740000; 0.2770000]   Show Hide
Zc 0.2740000 IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 10 Compiled value
Zc 0.2770000 ChemSep v8.3 pure component data Compiled value
Zc 0.2751580 KDB

Temperature Dependent Properties

Property Value Unit Temperature (K) Source
Cp,liquid [119.60; 127.20] J/mol×K [180.00; 300.00] Show Hide
Cp,liquid 119.60 J/mol×K 180.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 119.90 J/mol×K 190.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 120.20 J/mol×K 200.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 120.60 J/mol×K 210.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 121.10 J/mol×K 220.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 121.60 J/mol×K 230.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 122.10 J/mol×K 240.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 122.70 J/mol×K 250.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 123.40 J/mol×K 260.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 124.10 J/mol×K 270.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 124.30 J/mol×K 273.15 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 124.80 J/mol×K 280.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 125.60 J/mol×K 290.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 127.20 J/mol×K 298.00 NIST Kurbatov, 1948
T = -51 to 55°C, mean Cp, four temperatures.
Cp,liquid 120.90 J/mol×K 298.00 NIST von Reis, 1881
T = 287 to 344 K.
Cp,liquid 126.40 J/mol×K 298.15 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
Cp,liquid 126.27 J/mol×K 298.15 NIST Li and Pitzer, 1956
T = 14 to 294 K.
Cp,liquid 126.50 J/mol×K 300.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 22-017
ΔfusH [7.87; 7.87] kJ/mol [176.18; 176.20] Show Hide
ΔfusH 7.87 kJ/mol 176.18 NISTLi and Pitzer, 1956
ΔfusH 7.87 kJ/mol 176.20 NISTAcree, 1991
ΔfusH 7.87 kJ/mol 176.20 NISTAcree, 1991, 2
ΔvapH [28.20; 34.40] kJ/mol [262.00; 449.00] Show Hide
ΔvapH 31.90 kJ/mol 262.00 NISTLi and Pitzer, 1956
ΔvapH 34.40 kJ/mol 271.50 NISTStull, 1947
ΔvapH 31.00 kJ/mol 293.00 NIST Li and Pitzer, 1956
P = 30.32 kPA
ΔvapH 31.00 ± 29.00 kJ/mol 293.00 NISTLi and Pitzerk, 1956
ΔvapH 28.85 kJ/mol 330.40 NISTMajer and Svoboda, 1985
ΔvapH 28.70 kJ/mol 330.70 KDB
ΔvapH 33.50 kJ/mol 335.50 NISTGarcia-Sanchez and Trejo, 1987
ΔvapH 29.20 kJ/mol 429.00 NISTStephenson and Malanowski, 1987
ΔvapH 28.20 kJ/mol 449.00 NISTStephenson and Malanowski, 1987
ρl 1168.00 kg/m3 298.00 KDB
ΔfusS 44.67 J/mol×K 176.18 NISTLi and Pitzer, 1956
γ 0.02 N/m 293.20 KDB
ΔvapS 105.81 J/mol×K 293.00 NISTLi and Pitzer, 1956

Correlations

Property Value Unit Temperature (K) Source
Cp,gas [52.46; 156.23] J/mol×K [150.00; 1500.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is Cp,gas in J/mol×K, T in K
Coefficient A4.56610e+01
Coefficient B-4.49920e+02
Coefficient C4.89424e+00
Coefficient D1.54960e-04
Coefficient E-5.38290e-08
Temperature range, min.150.00
Temperature range, max.1500.00
Cp,gas 52.46 J/mol×K 150.00 Calculated Property
Cp,gas 76.73 J/mol×K 300.00 Calculated Property
Cp,gas 97.77 J/mol×K 450.00 Calculated Property
Cp,gas 113.56 J/mol×K 600.00 Calculated Property
Cp,gas 125.52 J/mol×K 750.00 Calculated Property
Cp,gas 134.80 J/mol×K 900.00 Calculated Property
Cp,gas 142.12 J/mol×K 1050.00 Calculated Property
Cp,gas 147.94 J/mol×K 1200.00 Calculated Property
Cp,gas 152.58 J/mol×K 1350.00 Calculated Property
Cp,gas 156.23 J/mol×K 1500.00 Calculated Property
Property Value Unit Temperature (K) Source
Cp,liquid [119.58; 130.04] J/mol×K [176.19; 330.45] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is Cp,liquid in J/mol×K, T in K
Coefficient A1.15470e+02
Coefficient B4.79340e+02
Coefficient C-5.70686e+00
Coefficient D2.95110e-02
Coefficient E-2.57940e-05
Temperature range, min.176.19
Temperature range, max.330.45
Cp,liquid 119.58 J/mol×K 176.19 Calculated Property
Cp,liquid 120.01 J/mol×K 193.33 Calculated Property
Cp,liquid 120.62 J/mol×K 210.47 Calculated Property
Cp,liquid 121.40 J/mol×K 227.61 Calculated Property
Cp,liquid 122.35 J/mol×K 244.75 Calculated Property
Cp,liquid 123.50 J/mol×K 261.89 Calculated Property
Cp,liquid 124.84 J/mol×K 279.03 Calculated Property
Cp,liquid 126.38 J/mol×K 296.17 Calculated Property
Cp,liquid 128.11 J/mol×K 313.31 Calculated Property
Cp,liquid 130.04 J/mol×K 330.45 Calculated Property
Property Value Unit Temperature (K) Source
η [0.0040774; 0.0001775] Pa×s [176.19; 423.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = exp(A + B/T + C·ln(T) + D·T^E)
Y is η in Pa×s, T in K
Coefficient A-9.78030e+00
Coefficient B8.91160e+02
Coefficient C-1.48660e-01
Coefficient D-3.58840e-07
Coefficient E2.00000e+00
Temperature range, min.176.19
Temperature range, max.423.00
η 0.0040774 Pa×s 176.19 Calculated Property
η 0.0020117 Pa×s 203.61 Calculated Property
η 0.0011693 Pa×s 231.04 Calculated Property
η 0.0007601 Pa×s 258.46 Calculated Property
η 0.0005350 Pa×s 285.88 Calculated Property
η 0.0003994 Pa×s 313.31 Calculated Property
η 0.0003117 Pa×s 340.73 Calculated Property
η 0.0002519 Pa×s 368.15 Calculated Property
η 0.0002091 Pa×s 395.58 Calculated Property
η 0.0001775 Pa×s 423.00 Calculated Property
Property Value Unit Temperature (K) Source
ΔvapH [36.27; 11.06] kJ/mol [176.19; 504.75] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc
Y is ΔvapH in kJ/mol, T in K
Coefficient A4.45877e+01
Coefficient B5.55838e-01
Coefficient C2.09485e-02
Coefficient D-7.22234e-01
Coefficient E5.69630e-01
Critical temperature, Tc (K)5.23000e+02
Temperature range, min.176.19
Temperature range, max.504.75
ΔvapH 36.27 kJ/mol 176.19 Calculated Property
ΔvapH 34.65 kJ/mol 212.70 Calculated Property
ΔvapH 33.03 kJ/mol 249.20 Calculated Property
ΔvapH 31.38 kJ/mol 285.71 Calculated Property
ΔvapH 29.60 kJ/mol 322.22 Calculated Property
ΔvapH 27.60 kJ/mol 358.72 Calculated Property
ΔvapH 25.19 kJ/mol 395.23 Calculated Property
ΔvapH 22.12 kJ/mol 431.74 Calculated Property
ΔvapH 17.90 kJ/mol 468.24 Calculated Property
ΔvapH 11.06 kJ/mol 504.75 Calculated Property
Property Value Unit Temperature (K) Source
Pvap [1.33; 5049.80] kPa [240.70; 523.00] The Yaws Handbook of Vapor Pressure Show Hide
Equationln(Y) = A + B/(T + C)
Y is Pvap in kPa, T in K
Coefficient A1.45193e+01
Coefficient B-2.92184e+03
Coefficient C-3.53950e+01
Temperature range, min.240.70
Temperature range, max.523.00
Pvap 1.33 kPa 240.70 Calculated Property
Pvap 8.79 kPa 272.07 Calculated Property
Pvap 37.28 kPa 303.43 Calculated Property
Pvap 116.81 kPa 334.80 Calculated Property
Pvap 294.69 kPa 366.17 Calculated Property
Pvap 633.36 kPa 397.53 Calculated Property
Pvap 1204.92 kPa 428.90 Calculated Property
Pvap 2084.61 kPa 460.27 Calculated Property
Pvap 3344.71 kPa 491.63 Calculated Property
Pvap 5049.80 kPa 523.00 Calculated Property
Pvap [2.21e-03; 5087.65] kPa [176.19; 523.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = exp(A + B/T + C·ln(T) + D·T^E)
Y is Pvap in kPa, T in K
Coefficient A5.96263e+01
Coefficient B-5.49241e+03
Coefficient C-6.71599e+00
Coefficient D5.29878e-06
Coefficient E2.00000e+00
Temperature range, min.176.19
Temperature range, max.523.00
Pvap 2.21e-03 kPa 176.19 Calculated Property
Pvap 0.17 kPa 214.72 Calculated Property
Pvap 3.03 kPa 253.26 Calculated Property
Pvap 22.97 kPa 291.79 Calculated Property
Pvap 101.89 kPa 330.33 Calculated Property
Pvap 318.20 kPa 368.86 Calculated Property
Pvap 782.33 kPa 407.40 Calculated Property
Pvap 1627.09 kPa 445.93 Calculated Property
Pvap 3003.58 kPa 484.47 Calculated Property
Pvap 5087.65 kPa 523.00 Calculated Property
Pvap [1.98e-03; 5117.20] kPa [176.19; 523.00] KDB Vapor Pressure Data Show Hide
Equationln(Y) = A + B/T + C·ln(T) + D·T² + E/T²
Y is Pvap in kPa, T in K
Coefficient A7.31701e+01
Coefficient B-5.95760e+03
Coefficient C-8.86262e+00
Coefficient D8.18126e-06
Coefficient E0.00000e+00
Temperature range, min.176.19
Temperature range, max.523.00
Pvap 1.98e-03 kPa 176.19 Calculated Property
Pvap 0.17 kPa 214.72 Calculated Property
Pvap 3.07 kPa 253.26 Calculated Property
Pvap 23.22 kPa 291.79 Calculated Property
Pvap 101.84 kPa 330.33 Calculated Property
Pvap 314.21 kPa 368.86 Calculated Property
Pvap 766.52 kPa 407.40 Calculated Property
Pvap 1593.33 kPa 445.93 Calculated Property
Pvap 2966.07 kPa 484.47 Calculated Property
Pvap 5117.20 kPa 523.00 Calculated Property
Pvap [0.86; 22.01] kPa [234.38; 290.76] NIST Show Hide
Equationln(Y) = A + B/(T + C)
Y is Pvap in kPa, T in K
Coefficient A1.42629e+01
Coefficient B-2.79843e+03
Coefficient C-4.02600e+01
ReferenceLi and Pitzer, 1956
CommentCoefficents calculated by NIST from author's data.
Temperature range, min.234.38
Temperature range, max.290.76
Pvap 0.86 kPa 234.38 Calculated Property
Pvap 1.35 kPa 240.64 Calculated Property
Pvap 2.06 kPa 246.91 Calculated Property
Pvap 3.06 kPa 253.17 Calculated Property
Pvap 4.46 kPa 259.44 Calculated Property
Pvap 6.36 kPa 265.70 Calculated Property
Pvap 8.89 kPa 271.97 Calculated Property
Pvap 12.22 kPa 278.23 Calculated Property
Pvap 16.53 kPa 284.50 Calculated Property
Pvap 22.01 kPa 290.76 Calculated Property
Pvap [0.13; 100.78] kPa [212.50; 330.60] NIST Show Hide
Equationln(Y) = A + B/(T + C)
Y is Pvap in kPa, T in K
Coefficient A1.43256e+01
Coefficient B-2.83024e+03
Coefficient C-3.92040e+01
ReferenceStull, 1947
CommentCoefficents calculated by NIST from author's data.
Temperature range, min.212.50
Temperature range, max.330.60
Pvap 0.13 kPa 212.50 Calculated Property
Pvap 0.42 kPa 225.62 Calculated Property
Pvap 1.15 kPa 238.74 Calculated Property
Pvap 2.76 kPa 251.87 Calculated Property
Pvap 5.99 kPa 264.99 Calculated Property
Pvap 11.93 kPa 278.11 Calculated Property
Pvap 22.10 kPa 291.23 Calculated Property
Pvap 38.53 kPa 304.36 Calculated Property
Pvap 63.75 kPa 317.48 Calculated Property
Pvap 100.78 kPa 330.60 Calculated Property
Property Value Unit Temperature (K) Source
ρl [1340.72; 684.20] kg/m3 [176.19; 504.75] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A / B^(1 + (1 − T/C)^D)
Y is ρl in kg/m3, T in K
Coefficient A1.09419e+02
Coefficient B2.65360e-01
Coefficient C5.23000e+02
Coefficient D2.87030e-01
Temperature range, min.176.19
Temperature range, max.504.75
ρl 1340.72 kg/m3 176.19 Calculated Property
ρl 1291.95 kg/m3 212.70 Calculated Property
ρl 1240.92 kg/m3 249.20 Calculated Property
ρl 1187.10 kg/m3 285.71 Calculated Property
ρl 1129.77 kg/m3 322.22 Calculated Property
ρl 1067.79 kg/m3 358.72 Calculated Property
ρl 999.38 kg/m3 395.23 Calculated Property
ρl 921.16 kg/m3 431.74 Calculated Property
ρl 825.51 kg/m3 468.24 Calculated Property
ρl 684.20 kg/m3 504.75 Calculated Property
Property Value Unit Temperature (K) Source
γ [0.04; 0.02] N/m [176.15; 330.45] Jasper (1972), surface tension of pure liquid compounds Compiled value Show Hide
EquationY = A + B·T + C·T² + D·T³ + E·T⁴
Y is γ in N/m, T in K
Coefficient A5.94256e-02
Coefficient B-1.18600e-04
Coefficient C0.00000e+00
Coefficient D0.00000e+00
Coefficient E0.00000e+00
Temperature range, min.176.15
Temperature range, max.330.45
γ 0.04 N/m 176.15 Calculated Property
γ 0.04 N/m 193.29 Calculated Property
γ 0.03 N/m 210.44 Calculated Property
γ 0.03 N/m 227.58 Calculated Property
γ 0.03 N/m 244.73 Calculated Property
γ 0.03 N/m 261.87 Calculated Property
γ 0.03 N/m 279.02 Calculated Property
γ 0.02 N/m 296.16 Calculated Property
γ 0.02 N/m 313.31 Calculated Property
γ 0.02 N/m 330.45 Calculated Property
γ [0.04; 8.05e-04] N/m [176.19; 504.75] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is γ in N/m, T in K
Coefficient A-4.32740e-02
Coefficient B-3.82450e+00
Coefficient C-2.07090e+00
Coefficient D-1.97040e-03
Coefficient E-1.91290e-07
Temperature range, min.176.19
Temperature range, max.504.75
γ 0.04 N/m 176.19 Calculated Property
γ 0.04 N/m 212.70 Calculated Property
γ 0.03 N/m 249.20 Calculated Property
γ 0.03 N/m 285.71 Calculated Property
γ 0.02 N/m 322.22 Calculated Property
γ 0.02 N/m 358.72 Calculated Property
γ 0.01 N/m 395.23 Calculated Property
γ 0.01 N/m 431.74 Calculated Property
γ 0.00 N/m 468.24 Calculated Property
γ 8.05e-04 N/m 504.75 Calculated Property
Property Value Unit Temperature (K) Source
λgas [0.00; 0.07] W/m×K [176.19; 1000.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A·T^B / (1 + C/T + D/T²)
Y is λgas in W/m×K, T in K
Coefficient A1.33810e-04
Coefficient B1.01000e+00
Coefficient C1.04250e+03
Coefficient D-2.44200e+03
Temperature range, min.176.19
Temperature range, max.1000.00
λgas 0.00 W/m×K 176.19 Calculated Property
λgas 0.01 W/m×K 267.72 Calculated Property
λgas 0.01 W/m×K 359.26 Calculated Property
λgas 0.02 W/m×K 450.79 Calculated Property
λgas 0.03 W/m×K 542.33 Calculated Property
λgas 0.03 W/m×K 633.86 Calculated Property
λgas 0.04 W/m×K 725.40 Calculated Property
λgas 0.05 W/m×K 816.93 Calculated Property
λgas 0.06 W/m×K 908.47 Calculated Property
λgas 0.07 W/m×K 1000.00 Calculated Property
Property Value Unit Temperature (K) Source
λliquid [0.15; 0.08] W/m×K [156.90; 416.90] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is λliquid in W/m×K, T in K
Coefficient A1.13570e-02
Coefficient B-6.40860e+01
Coefficient C-9.81270e-01
Coefficient D-3.94690e-03
Coefficient E6.61060e-07
Temperature range, min.156.90
Temperature range, max.416.90
λliquid 0.15 W/m×K 156.90 Calculated Property
λliquid 0.14 W/m×K 185.79 Calculated Property
λliquid 0.13 W/m×K 214.68 Calculated Property
λliquid 0.13 W/m×K 243.57 Calculated Property
λliquid 0.12 W/m×K 272.46 Calculated Property
λliquid 0.11 W/m×K 301.34 Calculated Property
λliquid 0.10 W/m×K 330.23 Calculated Property
λliquid 0.09 W/m×K 359.12 Calculated Property
λliquid 0.09 W/m×K 388.01 Calculated Property
λliquid 0.08 W/m×K 416.90 Calculated Property

Similar Compounds

Ethane, 1,1,2-trichloro-. Ethyl Chloride. Ethane, 1,1,1-trichloro-. Ethane, 1,1,2,2-tetrachloro-. Ethane, 1,2-dichloro-. Ethane, 1-chloro-1-fluoro-. 1-Bromo-1-chloroethane. 1-Bromo-1,1-dichloro ethane. 1,1-Dichloro-1-fluoroethane. Ethane, 1,1,1,2-tetrachloro-. Dichloroacetaldehyde. Propane, 2-chloro-. Propane, 2,2-dichloro-. Ethanol, 2,2-dichloro-. Ethane, pentachloro-.

Find more compounds similar to Ethane, 1,1-dichloro-.

Mixtures

Sources

Note: Cheméo is only indexing the data, follow the source links to retrieve the latest data. The source is also providing more information like the publication year, authors and more. Take the time to validate and double check the source of the data.
Outlier This icon means that the value is more than 2 standard deviations away from the property mean.
Calculated This icon marks a calculated value or equation: a prediction, not a measurement.
Compiled This icon marks a compiled value or equation: taken from a data compilation such as ChemSep, not from an original measurement report.
These property values are available through the Cheméo API. A free account gives you an access key.