Chemical Properties of Benzene, n-butyl- (CAS 104-51-8)

Benzene, n-butyl-

InChI
InChI=1S/C10H14/c1-2-3-7-10-8-5-4-6-9-10/h4-6,8-9H,2-3,7H2,1H3
InChI Key
OCKPCBLVNKHBMX-UHFFFAOYSA-N
Formula
C10H14
SMILES
CCCCc1ccccc1
Molecular Weight1
134.22
CAS
104-51-8
Other Names
  • 1-butylbenzene
  • 1-phenylbutane
  • UN 2709
  • benzene, butyl-
  • butylbenzene
  • n-butylbenzene
Cheméo is a service of Céondo GmbH, since 2007, we provide simulation, modelling and software development services for the industry. Do not hesitate to contact us for your projects.

Physical Properties

Property Value Unit Source
ω [0.3920; 0.3930]   Show Hide
ω 0.3920 PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
ω 0.3923 Passut and Danner (1973), critical constants and acentric factors Compiled value
ω 0.3930 ChemSep v8.3 pure component data Compiled value
ω 0.3930 KDB
PAff 791.90 kJ/mol NISTHunter and Lias, 1998
BasG 764.20 kJ/mol NISTHunter and Lias, 1998
ΔcH°liquid [-5873.00; -5872.10] kJ/mol Show Hide
ΔcH°liquid -5873.00 ± 1.10 kJ/mol NIST Good, 1975
see Good, 1973; Corresponding «DELTA»fHºliquid = -62.93 kJ/mol (simple calculation by NIST; no Washburn corrections)
ΔcH°liquid -5872.10 ± 1.10 kJ/mol NIST Prosen, Johnson, et al., 1946
Heat of combustion for gas phase =-1415.44 kcal/mol; Corresponding «DELTA»fHºliquid = -63.85 kJ/mol (simple calculation by NIST; no Washburn corrections)
μ [0.37; 0.40] debye Show Hide
μ 0.37 debye ChemSep v8.3 pure component data Compiled value
μ 0.40 debye KDB
ΔfG° [144.80; 145.40] kJ/mol Show Hide
ΔfG° 145.40 kJ/mol ChemSep v8.3 pure component data Compiled value
ΔfG° 144.80 kJ/mol KDB
Δc,grossH 5872.08 kJ/mol KDB
Δc,netH 5563.967 kJ/mol KDB
ΔfH°gas [-13.82; -12.80] kJ/mol Show Hide
ΔfH°gas -13.14 kJ/mol ChemSep v8.3 pure component data Compiled value
ΔfH°gas -13.82 kJ/mol KDB
ΔfH°gas -12.80 kJ/mol NIST Good, 1975
Value computed using «DELTA»fHliquid° value of -62.9±1.2 kj/mol from Good, 1975 and «DELTA»vapH° value of 50.1 kj/mol from Prosen, Johnson, et al., 1946.
ΔfH°gas -13.80 ± 1.30 kJ/mol NIST Prosen, Johnson, et al., 1946
Heat of combustion for gas phase =-1415.44 kcal/mol
ΔfH°liquid [-63.90; -62.90] kJ/mol Show Hide
ΔfH°liquid -62.90 ± 1.20 kJ/mol NIST Good, 1975
see Good, 1973
ΔfH°liquid -63.90 ± 1.30 kJ/mol NIST Prosen, Johnson, et al., 1946
Heat of combustion for gas phase =-1415.44 kcal/mol
ΔfusH° 15.70 kJ/mol Joback Calculated Property
ΔvapH° [50.10; 51.37] kJ/mol Show Hide
ΔvapH° 51.37 kJ/mol NISTMajer and Svoboda, 1985
ΔvapH° 50.80 kJ/mol NISTRu«7825»icka, Zábranský, et al., 1994
ΔvapH° 50.10 kJ/mol NISTReid, 1972
ΔvapH° 51.00 ± 2.90 kJ/mol NISTMesserly, Todd, et al., 1965, 3
ΔvapH° 50.10 kJ/mol NISTProsen, Johnson, et al., 1946
ΔvapH° 51.00 ± 2.90 kJ/mol NISTMesserly, Todd, et al., 1965, 2
IE [8.68; 8.71] eV Show Hide
IE 8.69 ± 0.01 eV NISTN/A
IE 8.68 eV NISTMcLoughlin, Morrison, et al., 1979
IE Outlier 8.71 ± 0.01 eV NISTLias and Ausloos, 1978
IE 8.69 eV NISTPrice, Bralsford, et al., 1959
IE 8.69 ± 0.01 eV NISTWatanabe, 1957
IE 8.69 ± 0.05 eV NIST Nagy-Felsobuki and Peel, 1979
Vertical value
log10WS [-4.06; -4.06]   Show Hide
log10WS -4.06 Aq. Solubility Prediction
log10WS -4.06 Estimated Solubility
logPoct/wat 3.029 Crippen Calculated Property
McVol 128.000 ml/mol McGowan Calculated Property
NFPA Fire 2 KDB
NFPA Health 2 KDB
Pc [2886.83; 2890.00] kPa Show Hide
Pc 2890.00 kPa DIPPR Project 851 - Thirty Years of Vapor-Liquid Critical Point Measurements and Experimental Technique Development
Pc 2890.00 kPa IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 3 Compiled value
Pc 2887.76 kPa PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Pc 2886.83 kPa Passut and Danner (1973), critical constants and acentric factors Compiled value
Pc 2890.00 kPa ChemSep v8.3 pure component data Compiled value
Pc 2890.00 kPa KDB
Pc 2890.00 ± 40.00 kPa NISTTsonopoulos and Ambrose, 1995
Pc 2887.00 ± 7.00 kPa NISTAmbrose, Broderick, et al., 1967
Ptriple 1.54e-07 kPa ChemSep v8.3 pure component data Compiled value
ρc [269.64; 269.78] kg/m3 Show Hide
ρc 269.78 ± 5.37 kg/m3 NISTTsonopoulos and Ambrose, 1995
ρc 269.64 ± 10.07 kg/m3 NISTSimon, 1957
Inp [170.00; 1078.00]   Show Hide
Inp 1061.00 NISTMSDC-RI
Inp 1058.00 NIST Beens, Tijssen, et al., 1998
10. m/0.25 mm/0.25 «mu»m, He
Inp 1039.00 NIST Beens, Tijssen, et al., 1998
10. m/0.25 mm/0.25 «mu»m, He
Inp 1043.00 NIST Estel, Mohnke, et al., 1995
100. m/0.25 mm/0.25 «mu»m
Inp 1062.90 NIST Cha and Lee, 1994
Column length: 20. m; Column diameter: 0.5 mm
Inp 1072.40 NIST Cha and Lee, 1994
Column length: 20. m; Column diameter: 0.5 mm
Inp 1037.00 NIST Zhang, Li, et al., 1992
N2; Column length: 25. m; Column diameter: 0.20 mm
Inp 1046.00 NIST Dimov and Mekenyan, 1989
Column length: 50. m; Column diameter: 0.25 mm
Inp 1047.00 NIST Matisová, Kovacicová, et al., 1989
He; Column length: 50. m; Column diameter: 0.20 mm
Inp 1047.00 NIST Engewald, Topalova, et al., 1987
Column length: 50. m; Column diameter: 0.30 mm
Inp 1036.00 NISTNabivach and Vasiliev, 1987
Inp 1069.00 NIST Grinberg, Tokarev, et al., 1984
He; Column length: 50. m; Column diameter: 0.25 mm
Inp 1067.00 NIST Grinberg, Tokarev, et al., 1984
He; Column length: 100. m; Column diameter: 0.25 mm
Inp 1046.00 NIST Boneva, Papazova, et al., 1983
N2; Column length: 85. m; Column diameter: 0.28 mm
Inp 1048.00 NIST Boneva, Papazova, et al., 1983
N2; Column length: 85. m; Column diameter: 0.28 mm
Inp 1049.00 NIST Boneva, Papazova, et al., 1983
N2; Column length: 85. m; Column diameter: 0.28 mm
Inp 1043.00 NIST Boneva, Papazova, et al., 1983
N2; Column length: 85. m; Column diameter: 0.28 mm
Inp 1039.60 NIST Tóth, 1983
N2; Column length: 15. m; Column diameter: 0.25 mm
Inp 1058.00 NIST Bredael, 1982
Column length: 100. m; Column diameter: 0.5 mm
Inp 1041.00 NIST Bredael, 1982
Column length: 100. m; Column diameter: 0.5 mm
Inp 1048.00 NIST Gerasimenko and Nabivach, 1982
N2; Column length: 50. m; Column diameter: 0.30 mm
Inp 1054.00 NIST Gerasimenko and Nabivach, 1982
N2; Column length: 50. m; Column diameter: 0.30 mm
Inp 1060.00 NIST Gerasimenko and Nabivach, 1982
N2; Column length: 50. m; Column diameter: 0.30 mm
Inp 1032.30 NIST Macák, Nabivach, et al., 1982
N2; Column length: 50. m; Column diameter: 0.25 mm
Inp 1034.90 NIST Macák, Nabivach, et al., 1982
N2; Column length: 50. m; Column diameter: 0.25 mm
Inp 1048.10 NIST Gerasimenko, Kirilenko, et al., 1981
N2; Column length: 50. m; Column diameter: 0.3 mm
Inp 1053.60 NIST Gerasimenko, Kirilenko, et al., 1981
N2; Column length: 50. m; Column diameter: 0.3 mm
Inp 1060.00 NIST Gerasimenko, Kirilenko, et al., 1981
N2; Column length: 50. m; Column diameter: 0.3 mm
Inp 1037.40 NISTKuchhal, Kumar, et al., 1980
Inp 1029.40 NIST Kuchhal, Kumar, et al., 1980
Column length: 45.7 m; Column diameter: 0.25 mm
Inp 1027.00 NIST Nabivach and Kirilenko, 1980
He, Chromaton N-AW-HMDS; Column length: 1. m
Inp 1032.30 NIST Nabivach, Bur'yan, et al., 1978
Column length: 50. m; Column diameter: 0.25 mm
Inp 1034.90 NIST Nabivach, Bur'yan, et al., 1978
Column length: 50. m; Column diameter: 0.25 mm
Inp 1037.00 NIST Engewald and Wennrich, 1976
N2; Column length: 100. m; Column diameter: 0.23 mm
Inp 1029.42 NIST Soják and Rijks, 1976
H2; Column length: 100. m; Column diameter: 0.25 mm
Inp 1051.00 NIST Mitra, Mohan, et al., 1974
N2, Chrom W; Column length: 6.1 m
Inp 1056.00 NIST Mitra, Mohan, et al., 1974
N2, Chrom W; Column length: 6.1 m
Inp 1059.00 NIST Mitra, Mohan, et al., 1974
N2, Chrom W; Column length: 6.1 m
Inp 1057.00 NIST Mitra, Mohan, et al., 1974, 2
H2; Column length: 6.1 m; Column diameter: 3.18 mm
Inp 1060.00 NIST Mitra, Mohan, et al., 1974, 2
H2; Column length: 6.1 m; Column diameter: 3.18 mm
Inp 1062.00 NIST Mitra, Mohan, et al., 1974, 2
H2; Column length: 6.1 m; Column diameter: 3.18 mm
Inp 1063.00 NIST Mitra, Mohan, et al., 1974, 2
H2; Column length: 6.1 m; Column diameter: 3.18 mm
Inp 1066.00 NIST Mitra, Mohan, et al., 1974, 2
H2; Column length: 6.1 m; Column diameter: 3.18 mm
Inp 1032.00 NIST Mitra, Mohan, et al., 1974, 2
H2; Column length: 50. m; Column diameter: 0.2 mm
Inp 1037.40 NIST Svob and Deur-Siftar, 1974
He; Column length: 25.5 m; Column diameter: 0.5 mm
Inp 1035.80 NIST Svob and Deur-Siftar, 1974
He; Column length: 10.5 m; Column diameter: 0.25 mm
Inp 1040.00 NIST Soják and Bucinská, 1970
N2; Column length: 200. m; Column diameter: 0.2 mm
Inp 1033.00 NIST Soják and Bucinská, 1970
N2; Column length: 200. m; Column diameter: 0.2 mm
Inp 1065.00 NIST Brown, Chapman, et al., 1968
N2, DCMS-treated Chromosorb W; Column length: 2.3 m
Inp 1033.00 NIST Bonastre and Grenier, 1967
Chromosorb P; Column length: 6. m
Inp 1040.00 NIST Bonastre and Grenier, 1967
Chromosorb P; Column length: 6. m
Inp 1035.20 NIST Evans and Smith, 1967
H2/N2=3/1, Celite; Column length: 2. m
Inp 1047.00 NISTAntheaume and Guiochon, 1965
Inp 1068.00 NIST Buchin, Salmon, et al., 2002
60. m/0.32 mm/1. «mu»m, He, 40. C @ 5. min, 3. K/min, 230. C @ 2. min
Inp 1040.00 NIST Takeoka, Perrino, et al., 1996
60. m/0.25 mm/0.25 «mu»m, 30. C @ 4. min, 2. K/min; Tend: 220. C
Inp 1042.00 NIST Takeoka, Perrino, et al., 1996
60. m/0.25 mm/0.25 «mu»m, 30. C @ 4. min, 2. K/min; Tend: 220. C
Inp 1057.00 NIST Ohnishi and Shibamoto, 1984
2. K/min; Column length: 50. m; Column diameter: 0.23 mm; Tstart: 80. C; Tend: 200. C
Inp 1040.00 NIST Hayes and Pitzer, 1982
110. m/0.25 mm/0.20 «mu»m, He, 1. K/min; Tstart: 35. C; Tend: 200. C
Inp 1063.00 NIST Louis, 1971
N2, 1. K/min; Column length: 50. m; Column diameter: 0.25 mm; Tstart: 60. C
Inp 1047.40 NIST Haagen-Smit Laboratory, 1997
He; Column length: 100. m; Column diameter: 0.2 mm; Program: 5C(10min) => 5C/min => 50C(48min) => 1.5C/min => 195C(91min)
Inp 1039.00 NIST Papazova and Pankova, 1975
N2; Column length: 100. m; Column diameter: 0.25 mm; Program: not specified
Inp 1044.00 NIST Papazova and Pankova, 1975
N2; Column length: 100. m; Column diameter: 0.25 mm; Program: not specified
Inp 1058.00 NIST Kallio, Jussila, et al., 2006
20. m/0.25 mm/0.25 «mu»m, 60. C @ 4. min, 5. K/min, 240. C @ 15. min
Inp 1061.00 NIST Elmore, Cooper, et al., 2005
0. m/0.25 mm/0.25 «mu»m, He, 40. C @ 2. min, 4. K/min, 280. C @ 5. min
Inp 1053.70 NIST Song, Lai, et al., 2003
30. m/0.25 mm/0.25 «mu»m, He, 4. K/min; Tstart: 40. C; Tend: 310. C
Inp 1053.30 NIST Song, Lai, et al., 2003
30. m/0.25 mm/0.25 «mu»m, He, 40. C @ 5. min, 4. K/min; Tend: 310. C
Inp 1050.10 NIST Song, Lai, et al., 2003
30. m/0.25 mm/0.25 «mu»m, He, 2. K/min; Tstart: 40. C; Tend: 310. C
Inp 1055.90 NIST Song, Lai, et al., 2003
30. m/0.25 mm/0.25 «mu»m, He, 6. K/min; Tstart: 40. C; Tend: 310. C
Inp 1036.40 NIST Sun and Stremple, 2003
30. m/0.25 mm/0.25 «mu»m, He, 3. K/min; Tstart: 40. C; Tend: 325. C
Inp 1054.00 NIST Isidorov, Krajewska, et al., 2001
30. m/0.25 mm/0.25 «mu»m, He, 3. K/min; Tstart: 40. C; Tend: 180. C
Inp 1042.00 NIST Yin, Liu, et al., 2001
N2, 1. K/min; Column length: 80. m; Column diameter: 0.22 mm; Tstart: 30. C; Tend: 130. C
Inp 1030.00 NIST Beens, Tijssen, et al., 1998
10. m/0.25 mm/0.25 «mu»m, He, 2. K/min; Tstart: 30. C; Tend: 225. C
Inp 1043.20 NIST Gautzsch and Zinn, 1996
8. K/min; Tstart: 35. C; Tend: 300. C
Inp 1050.10 NIST Lai and Song, 1995
30. m/0.25 mm/0.25 «mu»m, He, 2. K/min; Tstart: 40. C; Tend: 310. C
Inp 1053.70 NIST Lai and Song, 1995
30. m/0.25 mm/0.25 «mu»m, He, 4. K/min; Tstart: 40. C; Tend: 310. C
Inp 1055.90 NIST Lai and Song, 1995
30. m/0.25 mm/0.25 «mu»m, He, 6. K/min; Tstart: 40. C; Tend: 310. C
Inp 1053.30 NIST Lai and Song, 1995
30. m/0.25 mm/0.25 «mu»m, He, 40. C @ 5. min, 4. K/min; Tend: 310. C
Inp 1054.00 NIST Yu, Lin, et al., 1994
60. m/0.25 mm/1.0 «mu»m, He, 40. C @ 5. min, 2. K/min, 260. C @ 60. min
Inp 1047.00 NIST Peng, Hua, et al., 1992
30. m/0.32 mm/1.5 «mu»m, 40. C @ 4. min, 8. K/min; Tend: 280. C
Inp 1041.77 NIST White, Douglas, et al., 1992
100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C
Inp 1042.19 NIST White, Douglas, et al., 1992
100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C
Inp 1042.00 NIST White, Hackett, et al., 1992
100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C
Inp 1066.40 NIST Akporhonor, le Vent, et al., 1990
25. m/0.2 mm/0.33 «mu»m, N2, 15. K/min; Tstart: 60.01 C
Inp 1056.40 NIST Akporhonor, le Vent, et al., 1990
25. m/0.2 mm/0.33 «mu»m, N2, 2. K/min; Tstart: 60.01 C
Inp 1062.20 NIST Akporhonor, le Vent, et al., 1990
25. m/0.2 mm/0.33 «mu»m, N2, 7. K/min; Tstart: 60.01 C
Inp 1078.00 NIST Akporhonor, le Vent, et al., 1990
25. m/0.2 mm/0.33 «mu»m, N2, 15. K/min; Tstart: 120.01 C
Inp 1071.80 NIST Akporhonor, le Vent, et al., 1990
25. m/0.2 mm/0.33 «mu»m, N2, 2. K/min; Tstart: 120.01 C
Inp 1074.50 NIST Akporhonor, le Vent, et al., 1990
25. m/0.2 mm/0.33 «mu»m, N2, 7. K/min; Tstart: 120.01 C
Inp 1051.00 NIST Morinaga, Hara, et al., 1990
15. m/0.53 mm/1.5 «mu»m, He, 4. K/min; Tstart: 40. C; Tend: 90. C
Inp 1037.42 NIST Haynes and Pitzer, 1985
50. m/0.22 mm/0.33 «mu»m, He, 1. K/min; Tstart: -30. C; Tend: 240. C
Inp 1040.68 NIST Haynes and Pitzer, 1985
50. m/0.22 mm/0.33 «mu»m, He, 2. K/min; Tstart: -30. C; Tend: 240. C
Inp 1043.02 NIST Haynes and Pitzer, 1985
50. m/0.22 mm/0.33 «mu»m, He, 3. K/min; Tstart: -30. C; Tend: 240. C
Inp 1054.18 NIST Haynes and Pitzer, 1985
50. m/0.22 mm/0.33 «mu»m, He, 1. K/min; Tstart: -30. C; Tend: 240. C
Inp 1057.89 NIST Haynes and Pitzer, 1985
50. m/0.22 mm/0.33 «mu»m, He, 2. K/min; Tstart: -30. C; Tend: 240. C
Inp 1060.55 NIST Haynes and Pitzer, 1985
50. m/0.22 mm/0.33 «mu»m, He, 3. K/min; Tstart: -30. C; Tend: 240. C
Inp 1040.00 NIST Hayes and Pitzer, 1981
108. m/0.25 mm/0.2 «mu»m, 1. K/min; Tstart: 35. C; Tend: 200. C
Inp 1061.00 NIST Oruna-Concha, Bakker, et al., 2002
60. m/0.25 mm/0.25 «mu»m, He; Program: 0C => rapidly => 40C(8min) => 4C/min => 250C(10min)
Inp 1024.00 NIST Peng, 2000
15. m/0.53 mm/1. «mu»m, He; Program: 40C(3min) => 8C/min => 200(1min) => 5C/min => 300C(25min)
Inp 1066.87 NIST Hassoun, Pilling, et al., 1999
50. m/0.25 mm/1. «mu»m, He; Program: -50C(2min) => 49.9C/min => 35C(10min) => 3C/min => 200C(2min) => 40C/min => 240C(30min)
Inp 1044.00 NIST Mattinen, Tuominen, et al., 1995
30. m/0.32 mm/1. «mu»m, He; Program: 40C(3min) => 5C/min => 150C => 10C/min => 210C(30min)
Inp 1058.00 NIST Peng, Ding, et al., 1988
Supelcoport; Chromosorb; Column length: 3.05 m; Program: 40C(5min) => 10C/min => 200C or 250C (60min)
Inp 1049.00 NISTTello, Lebron-Aguilar, et al., 2009
Inp 1040.00 NISTTello, Lebron-Aguilar, et al., 2009
Inp 1044.00 NISTTello, Lebron-Aguilar, et al., 2009
Inp 1048.00 NISTLebrón-Aguilar, Quintanilla-López, et al., 2007
Inp 1054.00 NISTLebrón-Aguilar, Quintanilla-López, et al., 2007
Inp 1060.00 NISTLebrón-Aguilar, Quintanilla-López, et al., 2007
Inp 1042.00 NISTLebrón-Aguilar, Quintanilla-López, et al., 2007
Inp 1054.00 NISTChen and Feng, 2006
Inp 1046.00 NIST Gerasimenko and Nabivach, 1995
50. m/0.30 mm/0.26 «mu»m, Nitrogen
Inp 1047.00 NIST Gerasimenko and Nabivach, 1995
50. m/0.30 mm/0.26 «mu»m, Nitrogen
Inp 1048.00 NIST Gerasimenko and Nabivach, 1995
50. m/0.30 mm/0.26 «mu»m, Nitrogen
Inp 1026.00 NIST Sojak and Vigdergauz, 1978
H2
Inp 1038.00 NIST Papazova and Pankova, 1975
N2; Column length: 100. m; Column diameter: 0.25 mm
Inp 1045.00 NIST Papazova and Pankova, 1975
N2; Column length: 100. m; Column diameter: 0.25 mm
Inp 1052.00 NISTFerrand, 1962
Inp 1051.00 NIST Bramston-Cook, 2013
60. m/0.25 mm/1.0 «mu»m, Helium, 45. C @ 1.45 min, 3.6 K/min, 210. C @ 2.72 min
Inp 1053.00 NIST Kotowska, Zalikowski, et al., 2012
30. m/0.25 mm/0.25 «mu»m, Helium, 35. C @ 5. min, 3. K/min, 300. C @ 15. min
Inp 1047.00 NIST Supelco, 2012
100. m/0.25 mm/0.50 «mu»m, Helium, 20. C @ 15. min, 15. K/min, 220. C @ 30. min
Inp 1046.00 NIST Zenkevich, Ukolov, et al., 2011
30. m/0.32 mm/0.25 «mu»m, Nitrogen, 5. K/min; Tstart: 100. C; Tend: 200. C
Inp 1058.00 NIST Hussam, Alauddin, et al., 2002
15. m/0.25 mm/0.25 «mu»m, 5. K/min, 250. C @ 2. min; Tstart: 40. C
Inp 1052.00 NIST Health Safety Executive, 2000
50. m/0.22 mm/0.75 «mu»m, He, 5. K/min; Tstart: 50. C; Tend: 200. C
Inp 1046.30 NIST Shoenmakers, Oomen, et al., 2000
30. m/0.25 mm/0.25 «mu»m, He, 40. C @ 1. min, 3. K/min; Tend: 250. C
Inp 1045.00 NIST Orav, Kailas, et al., 1999
2. K/min; Tstart: 50. C; Tend: 160. C
Inp 1062.90 NIST Wang and Fingas, 1995
30. m/0.25 mm/0.25 «mu»m, He, 35. C @ 2. min, 10. K/min, 300. C @ 10. min
Inp 1069.00 NIST King, Hamilton, et al., 1993
50. m/0.32 mm/0.52 «mu»m, He, 40. C @ 3. min, 4. K/min, 250. C @ 30. min
Inp 1045.00 NIST Ciccioli, Cecinato, et al., 1992
60. m/0.32 mm/1.2 «mu»m, He, 30. C @ 10. min, 3. K/min; Tend: 240. C
Inp 1039.00 NIST Hartgers, Damste, et al., 1992
25. m/0.32 mm/0.45 «mu»m, He, 0. C @ 5. min, 3. K/min, 320. C @ 10. min
Inp 1068.00 NIST Macku and Shibamoto, 1991
He, 40. C @ 5. min, 2. K/min; Column length: 60. m; Column diameter: 0.25 mm; Tend: 160. C
Inp 1067.00 NIST Macku and Shibamoto, 1991, 2
He, 40. C @ 5. min, 2. K/min; Column length: 60. m; Column diameter: 0.25 mm; Tend: 160. C
Inp 1045.00 NIST Zenkevich and Ventura, 1991
Helium, 50. C @ 0. min, 5. K/min, 240. C @ 0. min; Column length: 54. m; Column diameter: 0.26 mm
Inp 1041.00 NIST Stern, Flath, et al., 1985
50. C @ 0.1 min, 4. K/min, 225. C @ 30. min; Column length: 50. m; Column diameter: 0.32 mm
Inp 1054.00 NIST Kotowska, Zalikowski, et al., 2012
30. m/0.25 mm/0.25 «mu»m, Helium; Program: not specified
Inp 1058.00 NIST Robinson, Adams, et al., 2012
Program: not specified
Inp 1064.00 NIST Robinson, Adams, et al., 2012
Program: not specified
Inp 1055.00 NIST Blunden, Aneja, et al., 2005
60. m/0.32 mm/1.0 «mu»m, Helium; Program: -50 0C (2 min) 8 0C/min -> 200 0C (7.75 min) 25 0C -> 225 0C (8 min)
Inp 1040.00 NIST Cornwell and Cordano, 2003
Program: not specified
Inp 1022.00 NIST Luo and Agnew, 2001
30. m/0.25 mm/1.0 «mu»m, Helium; Program: not specified
Inp 1048.00 NIST Zhu and Wang, 2001
Program: not specified
Inp 1048.00 NIST Spieksma, 1999
Program: not specified
Inp 1046.00 NIST Zenkevich, 1999
Program: not specified
Inp 1047.00 NIST Zenkevich and Tsibulskaya, 1997
Program: not specified
Inp 1058.00 NIST Peng, 1996
30. m/0.53 mm/1.5 «mu»m; Program: 40 0C (4 min) 8 0C/min -> 200 0C (1 min) 5 0C/min -> 280 0C (20 min)
Inp 1040.00 NIST Xiuhua, Zhang, et al., 1996
Program: not specified
Inp 1048.00 NIST Xiuhua, Zhang, et al., 1996
Program: not specified
Inp 1047.00 NIST Zenkevich and Chupalov, 1996
Program: not specified
Inp 1041.00 NIST Ciccioli, Cecinato, et al., 1994
60. m/0.32 mm/0.25 «mu»m; Program: not specified
Inp 1046.00 NIST Dimov, Osman, et al., 1994
Program: not specified
Inp 1048.00 NIST Matisová, Juranyiová, et al., 1991
52. m/0.25 mm/0.38 «mu»m, H2; Program: 70 - 160 C at 1.5 deg/min; 160 - 280 C at 15 deg/min 15 min at 280 C
Inp 1036.20 NIST Dimov and Mekenyan, 1989
Program: not specified
Inp 1040.00 NIST Waggott and Davies, 1984
Hydrogen; Column length: 50. m; Column diameter: 0.32 mm; Program: not specified
Inp 1041.00 NIST Waggott and Davies, 1984
Hydrogen; Column length: 50. m; Column diameter: 0.32 mm; Program: not specified
Inp 1047.00 NIST Bonchev, Mekenjan, et al., 1979
Program: not specified
Inp 1033.00 NIST Robinson and Odell, 1971
N2, Embacel; Column length: 3.0 m; Program: 25C(5min) => 2C/min => 35 => 4C/min => 95C(hold)
Inp Outlier 170.00 NIST Aracil, Font, et al., 2005
Column length: 60. m; Column diameter: 0.25 mm; Program: not specified
Inp 1058.00 NISTMSDC-RI
Inp 1037.00 NISTMSDC-RI
Inp 1036.00 NISTMSDC-RI
Inp 1046.00 NISTMSDC-RI
Inp 1041.00 NISTMSDC-RI
Inp 1034.90 NISTMSDC-RI
Inp 1029.40 NISTMSDC-RI
Inp 1029.42 NISTMSDC-RI
Inp 1060.00 NISTMSDC-RI
Inp 1037.40 NISTMSDC-RI
Inp 1033.00 NISTMSDC-RI
Inp 1053.70 NISTMSDC-RI
Inp 1030.00 NISTMSDC-RI
Inp 1042.19 NISTMSDC-RI
Inp 1078.00 NISTMSDC-RI
Inp 1040.68 NISTMSDC-RI
Inp 1040.00 NISTMSDC-RI
Ip [1269.00; 1367.70]   Show Hide
Ip 1309.10 NIST Tóth, 1983
N2; Column length: 30. m; Column diameter: 0.3 mm
Ip 1356.40 NIST Vernon and Suratman, 1983
He, A silanized white support; Column length: 2. m
Ip Outlier 1362.10 NIST Vernon and Suratman, 1983
He, A silanized white support; Column length: 2. m
Ip Outlier 1367.70 NIST Vernon and Suratman, 1983
He, A silanized white support; Column length: 2. m
Ip 1284.00 NISTKuchhal, Kumar, et al., 1980
Ip 1337.60 NIST Ellis and Still, 1979
Chromosorb G
Ip 1301.90 NIST Engewald and Wennrich, 1976
N2; Column length: 100. m; Column diameter: 0.23 mm
Ip 1284.00 NIST Döring, Estel, et al., 1974
Column length: 100. m; Column diameter: 0.2 mm
Ip 1328.00 NIST Bonastre and Grenier, 1967
Chromosorb P; Column length: 6. m
Ip 1335.00 NIST Bonastre and Grenier, 1967
Chromosorb P; Column length: 6. m
Ip 1343.00 NIST Bonastre and Grenier, 1967
Chromosorb P; Column length: 6. m
Ip 1321.00 NIST Bonastre and Grenier, 1967
Chromosorb P; Column length: 6. m
Ip 1306.00 NIST Umano and Shibamoto, 1987
He, 40. C @ 10. min, 2. K/min; Column length: 60. m; Column diameter: 0.25 mm; Tend: 200. C
Ip 1322.00 NIST Elmore, Nisyrios, et al., 2005
60. m/0.25 mm/0.25 «mu»m, He, 40. C @ 2. min, 4. K/min; Tend: 280. C
Ip 1324.00 NIST Peng, 2000
15. m/0.53 mm/1. «mu»m, He, 40. C @ 3. min, 5. K/min, 220. C @ 30. min
Ip 1325.00 NIST Peng, 2000
15. m/0.53 mm/1. «mu»m, He, 40. C @ 3. min, 5. K/min, 220. C @ 30. min
Ip 1304.00 NIST Shimoda, Shigematsu, et al., 1995
60. m/0.25 mm/0.25 «mu»m, 2. K/min; Tstart: 50. C; Tend: 230. C
Ip 1308.00 NIST Chung, Eiserich, et al., 1994
He, 60. C @ 4. min, 3. K/min, 220. C @ 30. min; Column length: 60. m; Column diameter: 0.25 mm
Ip 1306.00 NIST Peng, Hua, et al., 1992
30. m/0.53 mm/1. «mu»m, 40. C @ 4. min, 8. K/min, 200. C @ 20. min
Ip 1280.00 NIST Suárez and Duque, 1991
2. K/min; Column length: 25. m; Column diameter: 0.31 mm; Tstart: 50. C; Tend: 200. C
Ip 1284.00 NIST Suárez and Duque, 1991
2. K/min; Column length: 25. m; Column diameter: 0.31 mm; Tstart: 50. C; Tend: 200. C
Ip 1320.00 NIST Nesterov, Nesterova, et al., 2000
Column length: 50. m
Ip 1321.00 NIST Nesterov, Nesterova, et al., 2000
Column length: 50. m
Ip 1332.00 NIST Nesterov, Nesterova, et al., 2000
Column length: 50. m
Ip 1348.00 NIST Nesterov, Nesterova, et al., 2000
Column length: 50. m
Ip 1359.00 NIST Nesterov, Nesterova, et al., 2000
Column length: 50. m
Ip 1310.00 NIST Nesterov, Nesterova, et al., 2000
Column length: 50. m
Ip 1284.00 NISTSutter, Peterson, et al., 1997
Ip 1269.00 NIST Puvipirom and Chaisei, 2012
15. m/0.32 mm/0.50 «mu»m, Helium, 3. K/min; Tstart: 40. C; Tend: 250. C
Ip 1301.00 NIST Horiuchi, Umano, et al., 1998
60. m/0.25 mm/1. «mu»m, He, 3. K/min, 200. C @ 40. min; Tstart: 50. C
Ip 1323.00 NIST Chung, Eiserich, et al., 1993
60. C @ 4. min, 3. K/min; Column length: 60. m; Column diameter: 0.25 mm; Tend: 220. C
Ip 1271.00 NIST Herain, MRAVEC, et al., 1991
70. C @ 21. min, 5. K/min, 150. C @ 999. min
Ip 1310.00 NIST Gyawali and Kim, 2012
60. m/0.20 mm/0.25 «mu»m, Helium; Program: 40 0C (3 min) 2 0C/min -> 150 0C 4 0C/min -> 220 0C (20 min) 5 0C/min -> 230 0C
Ip 1312.00 NIST Gyawali and Kim, 2009
60. m/0.25 mm/0.25 «mu»m, Helium; Program: 40 0C (3 min) 2 0C/min -> 150 0C 4 0C/min -> 220 0C (20 min)
Ip 1319.00 NIST Vichi, Guadayol, et al., 2007
30. m/0.25 mm/0.25 «mu»m, He; Program: 40C(3min) => 4C/min => 75C => 8C/min => 250C(5min)
Ip 1310.00 NIST Gyawalia, Seo, et al., 2006
60. m/0.2 mm/0.25 «mu»m, He; Program: 40C(3min) => 2C/min => 150C => 4C/min => 220C(20min) => 5C/min => 230C
Ip 1297.00 NIST Vichi, Pizzale, et al., 2005
30. m/0.25 mm/0.25 «mu»m; Program: 40C(3min) => 4C/min => 75C => 8C/min => 250C
Ip 1310.00 NIST Kim. J.H., Ahn, et al., 2004
60. m/0.25 mm/0.25 «mu»m, Helium; Program: 60 0C (3 min) 2 0C/min -> 150 0C 4 0C/min -> 200 0C
Ip 1309.00 NIST Cornwell and Cordano, 2003
Program: not specified
Ip 1284.00 NIST Ivanciuc, Ivanciuc, et al., 2001
Program: not specified
Ip 1338.00 NIST Lopez, Lavilla, et al., 2000
50. m/0.2 mm/0.33 «mu»m, N2; Program: 70C(1min) => 3C/min => 142C(2min) => 25C/min => 230C(5min)
Ip 1338.00 NIST López, Lavilla, et al., 1998
50. m/0.2 mm/0.33 «mu»m, N2; Program: 70C (1min) => 3C/min => 142C (2min) => 25C/min => 230C (5min)
Ip 1312.00 NIST Peng, 1996
30. m/0.53 mm/1.0 «mu»m; Program: 40 0C (4 min) 4 0C/min -> 200 0C (20 min)
Ip 1309.00 NIST Xiuhua, Zhang, et al., 1996
Program: not specified
Ip 1312.00 NIST Peng, Yang, et al., 1991
Program: not specified
Ip 1316.00 NIST Peng, Yang, et al., 1991
Program: not specified
Ip 1291.00 NIST Dimov and Mekenyan, 1989
Program: not specified
Ip 1320.00 NISTMSDC-RI
Ip 1310.00 NISTMSDC-RI
Ip 1312.00 NISTMSDC-RI
Ip 1269.00 NISTMSDC-RI
S°gas 437.86 J/mol×K NIST Messerly J.F., 1965
S(298.15 K) estimated by the method of increments [ Thermodynamics Research Center, 1997, Taylor W.J., 1946] is 1-2 J/mol*K larger than experimental one.
S°liquid [321.21; 321.30] J/mol×K Show Hide
S°liquid 321.21 J/mol×K NISTMesserly, Todd, et al., 1965
S°liquid 321.30 J/mol×K NIST Huffman, Parks, et al., 1931
Extrapolation below 90 K, 78.95 J/mol*K.
Tboil [442.15; 466.00] K Show Hide
Tboil 456.38 K Isobaric vapour + liquid equilibria for three binary systems (toluene + anisole, nbutylbenzene + anisole, and guaiacol + anisole) at 101.33 kPa
Tboil 456.40 K Isobaric (vapour + liquid) equilibria for N-formylmorpholine with ethylbenzene, n-butylbenzene, iso-propylbenzene and 1,2,4-trimethylbenzene at 101.33 kPa
Tboil 456.42 K ChemSep v8.3 pure component data Compiled value
Tboil 456.46 K KDB
Tboil 456.50 K NISTWeast and Grasselli, 1989
Tboil 456.00 K NISTAmerican Tokyo Kasei, 1988
Tboil 456.40 K NISTMajer and Svoboda, 1985
Tboil 456.43 ± 0.20 K NISTAnonymous, 1956
Tboil 454.00 ± 4.00 K NISTDeTar and Weis, 1956
Tboil 456.60 ± 1.00 K NISTKieffer and Holroyd, 1955
Tboil 456.00 ± 3.00 K NISTIpatieff, Kvetinskas, et al., 1953
Tboil 456.41 ± 0.30 K NISTAnonymous, 1952
Tboil 455.00 ± 3.00 K NISTCraig and Larrab, 1951
Tboil 455.70 ± 1.50 K NISTAndrews and Keefer, 1950
Tboil 456.05 ± 0.30 K NISTBryce-Smith and Turner, 1950
Tboil 456.50 ± 0.30 K NISTBirch, Dean, et al., 1949
Tboil 456.25 ± 0.40 K NISTBirch, Dean, et al., 1949
Tboil 456.41 ± 0.30 K NISTBoord, Henne, et al., 1949
Tboil 456.00 ± 0.70 K NISTFoehr and Fenske, 1949
Tboil 456.42 ± 0.03 K NISTForziati and Rossini, 1949
Tboil 456.30 ± 0.30 K NISTFenske, Braun, et al., 1947
Tboil 456.41 ± 0.10 K NISTForziati and Rossini, 1947
Tboil 456.30 ± 0.50 K NISTLecat, 1947
Tboil 456.41 ± 0.30 K NISTBoord, Greenlee, et al., 1946
Tboil 456.50 ± 0.30 K NISTKarabinos and Lamberti, 1946
Tboil 456.25 ± 0.30 K NISTAnonymous, 1945
Tboil 456.25 ± 0.30 K NISTAnonymous, 1945, 2
Tboil 456.50 ± 0.20 K NISTAnonymous, 1945, 2
Tboil 456.50 ± 0.20 K NISTAnonymous, 1945, 2
Tboil 456.34 ± 0.30 K NISTAnonymous, 1945, 3
Tboil 455.00 ± 2.00 K NISTGreensfelder, Voge, et al., 1945
Tboil 453.00 ± 2.00 K NISTHerr, Whitmore, et al., 1945
Tboil 455.00 ± 3.00 K NISTMattox and Grosse, 1945
Tboil 454.50 ± 0.80 K NISTSmith and Pennekamp, 1945
Tboil 456.25 ± 0.30 K NISTAnonymous, 1944
Tboil 456.41 ± 0.20 K NISTBoord, Perilstein, et al., 1944
Tboil 456.41 ± 0.30 K NISTGreenlee, 1944
Tboil Outlier 466.00 ± 2.00 K NIST Evans, 1938
Data excluded from overall average
Tboil Outlier 442.15 ± 2.50 K NIST Ipatieff, Komarewsky, et al., 1936
Data excluded from overall average
Tboil 453.00 ± 3.00 K NISTSuter and Gerhart, 1935
Tboil 451.00 ± 5.00 K NIST Suter and Gerhart, 1935
Data excluded from overall average
Tboil 457.00 ± 4.00 K NISTHall, 1933
Tboil 456.45 ± 0.30 K NISTHuffman, Parks, et al., 1931
Tboil 453.00 ± 4.00 K NISTBoedtker, 1929
Tboil 453.00 ± 5.00 K NISTStratford, 1929
Tboil 456.25 ± 0.30 K NISTTimmermans and Martin, 1928
Tboil 453.65 ± 2.00 K NISTGilman and Beaber, 1925
Tboil 453.15 ± 2.00 K NISTSabatier and Mailhe, 1909
Tc [660.05; 661.00] K Show Hide
Tc 660.30 K DIPPR Project 851 - Thirty Years of Vapor-Liquid Critical Point Measurements and Experimental Technique Development
Tc 660.50 K IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 3 Compiled value
Tc 660.50 K PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Tc 660.54 K Passut and Danner (1973), critical constants and acentric factors Compiled value
Tc 660.50 K ChemSep v8.3 pure component data Compiled value
Tc 660.50 K KDB
Tc 660.50 ± 0.50 K NISTTsonopoulos and Ambrose, 1995
Tc 660.50 K NISTMajer and Svoboda, 1985
Tc Outlier 660.05 ± 0.50 K NISTAmbrose, Broderick, et al., 1967
Tc 660.45 ± 0.10 K NIST Ambrose, Cox, et al., 1960
Visual, PRT, IPTS-48, with decomp.
Tc Outlier 661.00 ± 0.50 K NISTSimon, 1957
Tfus [184.70; 192.00] K Show Hide
Tfus 185.15 K Jean-Claude Bradley Open Melting Point Dataset (2014, CC0) Compiled value
Tfus 185.30 K ChemSep v8.3 pure component data Compiled value
Tfus 185.20 K KDB
Tfus 185.19 K Aq. Solubility Prediction
Tfus 185.15 ± 0.20 K NISTGuieu, Faradjzadeh, et al., 1980
Tfus 185.15 ± 0.20 K NISTGuieu, Faradjzadeh, et al., 1980, 2
Tfus 185.61 ± 0.20 K NISTBirch, Dean, et al., 1949
Tfus 185.61 ± 0.30 K NISTBirch, Dean, et al., 1949
Tfus 185.00 ± 0.50 K NISTBoord, Henne, et al., 1949
Tfus 185.18 ± 0.04 K NISTStreiff, Murphy, et al., 1947
Tfus 185.00 ± 0.20 K NISTBoord, Greenlee, et al., 1946
Tfus 185.18 ± 0.30 K NISTKarabinos and Lamberti, 1946
Tfus 184.97 ± 0.20 K NISTBoord, Perilstein, et al., 1944
Tfus 184.70 ± 1.50 K NISTTimmermans, 1935
Tfus 184.70 ± 1.00 K NISTParks and Huffman, 1931
Tfus Outlier 192.00 ± 0.30 K NIST Timmermans and Martin, 1928
Data excluded from overall average
Ttriple [184.60; 185.30] K Show Hide
Ttriple 185.30 K ChemSep v8.3 pure component data Compiled value
Ttriple 185.30 ± 0.01 K NIST Messerly, Todd, et al., 1965, 2
Crystal phase 1 phase
Ttriple 185.14 ± 0.01 K NIST Messerly, Todd, et al., 1965, 2
Metastable crystal phase
Ttriple 184.60 ± 0.25 K NISTHuffman, Parks, et al., 1931, 2
Ttriple 185.30 ± 0.01 K NIST Messerly, Todd, et al., 1965
Crystal phase 1 phase
Ttriple 185.14 ± 0.01 K NIST Messerly, Todd, et al., 1965
Metastable crystal phase
Ttriple 184.60 ± 0.25 K NISTHuffman, Parks, et al., 1931
UQi 4.59 ChemSep v8.3 pure component data Compiled value
URi 5.95 ChemSep v8.3 pure component data Compiled value
Vc [0.497; 0.497] m3/kmol Show Hide
Vc 0.497 m3/kmol IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 3 Compiled value
Vc 0.497 m3/kmol PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Vc 0.497 m3/kmol ChemSep v8.3 pure component data Compiled value
Vc 0.497 m3/kmol KDB
Vc 0.497 m3/kmol NISTTsonopoulos and Ambrose, 1995
Zc [0.2615440; 0.2620000]   Show Hide
Zc 0.2620000 IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 3 Compiled value
Zc 0.2620000 ChemSep v8.3 pure component data Compiled value
Zc 0.2615440 KDB

Temperature Dependent Properties

Property Value Unit Temperature (K) Source
Cp,liquid [203.00; 243.34] J/mol×K [293.00; 298.20] Show Hide
Cp,liquid 203.00 J/mol×K 293.00 NISTTschamler, 1948
Cp,liquid 241.00 J/mol×K 298.15 NISTGood, 1973
Cp,liquid 243.34 J/mol×K 298.15 NIST Messerly, Todd, et al., 1965
T = 10 to 380 K.
Cp,liquid 240.20 J/mol×K 298.20 NIST Huffman, Parks, et al., 1931
T = 94 to 298 K. Value is unsmoothed experimental datum.
Csat [259.10; 293.90] J/mol×K [332.20; 401.30] Show Hide
Csat 259.10 J/mol×K 332.20 Saturated Heat Capacities of Some Linear and Branched Alkylbenzenes between (332 and 401) K
Csat 263.00 J/mol×K 342.10 Saturated Heat Capacities of Some Linear and Branched Alkylbenzenes between (332 and 401) K
Csat 267.80 J/mol×K 354.90 Saturated Heat Capacities of Some Linear and Branched Alkylbenzenes between (332 and 401) K
Csat 272.90 J/mol×K 361.80 Saturated Heat Capacities of Some Linear and Branched Alkylbenzenes between (332 and 401) K
Csat 277.60 J/mol×K 371.60 Saturated Heat Capacities of Some Linear and Branched Alkylbenzenes between (332 and 401) K
Csat 283.90 J/mol×K 381.50 Saturated Heat Capacities of Some Linear and Branched Alkylbenzenes between (332 and 401) K
Csat 288.00 J/mol×K 391.40 Saturated Heat Capacities of Some Linear and Branched Alkylbenzenes between (332 and 401) K
Csat 293.90 J/mol×K 401.30 Saturated Heat Capacities of Some Linear and Branched Alkylbenzenes between (332 and 401) K
η [0.0004300; 0.0023600] Pa×s [253.15; 373.15] Show Hide
η 0.0022100 Pa×s 253.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
η 0.0023600 Pa×s 253.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
η 0.0010600 Pa×s 293.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
η 0.0010400 Pa×s 293.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
η 0.0010500 Pa×s 293.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
η 0.0010000 Pa×s 293.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
η 0.0010340 Pa×s 293.15 Densities, Viscosities, and Refractive Indices of Binary Mixtures of Anisole with Benzene, Methylbenzene, Ethylbenzene, Propylbenzene, and Butylbenzene at (293.15 and 303.15) K
η 0.0009010 Pa×s 303.15 Density and Viscosity of Propyl Formate + Aromatic Hydrocarbons at T = (303.15, 308.15, and 313.15) K
η 0.0008800 Pa×s 303.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
η 0.0009100 Pa×s 303.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
η 0.0009150 Pa×s 303.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
η 0.0009010 Pa×s 303.15 Physical Properties of Binary Mixtures of Ethyl Formate with Benzene, Isopropyl Benzene, Isobutyl Benzene, and Butylbenzene at (303.15, 308.15, and 313.15) K
η 0.0008930 Pa×s 303.15 Densities, Viscosities, and Refractive Indices of Binary Mixtures of Anisole with Benzene, Methylbenzene, Ethylbenzene, Propylbenzene, and Butylbenzene at (293.15 and 303.15) K
η 0.0008910 Pa×s 303.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
η 0.0008440 Pa×s 308.15 Density and Viscosity of Propyl Formate + Aromatic Hydrocarbons at T = (303.15, 308.15, and 313.15) K
η 0.0008440 Pa×s 308.15 Physical Properties of Binary Mixtures of Ethyl Formate with Benzene, Isopropyl Benzene, Isobutyl Benzene, and Butylbenzene at (303.15, 308.15, and 313.15) K
η 0.0007870 Pa×s 313.15 Physical Properties of Binary Mixtures of Ethyl Formate with Benzene, Isopropyl Benzene, Isobutyl Benzene, and Butylbenzene at (303.15, 308.15, and 313.15) K
η 0.0007870 Pa×s 313.15 Density and Viscosity of Propyl Formate + Aromatic Hydrocarbons at T = (303.15, 308.15, and 313.15) K
η 0.0008010 Pa×s 313.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
η 0.0007750 Pa×s 313.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
η 0.0008010 Pa×s 313.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
η 0.0007730 Pa×s 313.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
η 0.0006790 Pa×s 323.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
η 0.0006870 Pa×s 323.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
η 0.0007080 Pa×s 323.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
η 0.0007130 Pa×s 323.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
η 0.0006150 Pa×s 333.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
η 0.0006010 Pa×s 333.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
η 0.0006310 Pa×s 333.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
η 0.0006360 Pa×s 333.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
η 0.0005660 Pa×s 343.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
η 0.0005710 Pa×s 343.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
η 0.0005160 Pa×s 353.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
η 0.0004690 Pa×s 363.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
η 0.0004300 Pa×s 373.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
ΔfusH [10.98; 11.22] kJ/mol [184.60; 185.30] Show Hide
ΔfusH 10.98 kJ/mol 184.60 NISTHuffman, Parks, et al., 1931
ΔfusH 10.98 kJ/mol 184.60 NISTHuffman, Parks, et al., 1931, 2
ΔfusH 11.22 kJ/mol 185.30 NISTDomalski and Hearing, 1996
ΔfusH 11.22 kJ/mol 185.30 NISTDomalski and Hearing, 1996
ΔvapH [37.50; 53.50] kJ/mol [323.00; 456.40] Show Hide
ΔvapH 53.50 kJ/mol 323.00 NISTKasehgari, Mokbel, et al., 1993
ΔvapH 48.00 ± 0.10 kJ/mol 343.00 NISTSvoboda, Charvátová, et al., 1982
ΔvapH 46.80 ± 0.10 kJ/mol 358.00 NISTSvoboda, Charvátová, et al., 1982
ΔvapH 46.00 ± 0.10 kJ/mol 368.00 NISTSvoboda, Charvátová, et al., 1982
ΔvapH 45.20 kJ/mol 414.00 NIST Linek, Fried, et al., 1965
See also Boublik, Fried, et al., 1984.
ΔvapH 45.70 kJ/mol 416.00 NIST Stephenson and Malanowski, 1987
See also Forziati, Norris, et al., 1949.
ΔvapH 47.40 ± 0.20 kJ/mol 422.00 NIST Steele, Chirico, et al., 2002
See also Verevkin, 2006.
ΔvapH 43.50 ± 0.20 kJ/mol 422.00 NISTSteele, Chirico, et al., 2002
ΔvapH 40.60 ± 0.40 kJ/mol 422.00 NISTSteele, Chirico, et al., 2002
ΔvapH 37.50 ± 0.70 kJ/mol 422.00 NISTSteele, Chirico, et al., 2002
ΔvapH 39.25 kJ/mol 456.40 KDB
ΔvapH 38.87 kJ/mol 456.40 NISTMajer and Svoboda, 1985
n0 [1.48450; 1.48950]   [293.10; 303.15] Show Hide
n0 1.48950 293.10 Extraction of propylbenzene or butylbenzene from dodecane using 4-methyl-N-butylpyridinium tetrafluoroborate, [mebupy][BF4], as an ionic liquid at different temperatures
at 1 kPa
n0 1.48940 293.10 Extraction of Butylbenzene from Dodecane Using Hexafluorophosphate-Based Ionic Liquids: Effect of Cation Change
at 1 kPa
n0 1.48950 293.15 Densities, Viscosities, and Refractive Indices of Binary Mixtures of Anisole with Benzene, Methylbenzene, Ethylbenzene, Propylbenzene, and Butylbenzene at (293.15 and 303.15) K
n0 1.48735 298.15 Effect of Temperature on the Change of Refractive Index on Mixing for Butyl Acetate + Aromatic Hydrocarbons
at 1 kPa
n0 1.48740 298.15 Excess Molar Volumes of (propiophenone + benzene, or toluene, or ethylbenzene, or butylbenzene) at temperatures 298.15 K and 328.15 K
at 1 kPa
n0 1.48742 298.15 KDB
n0 1.48450 303.15 Densities, Viscosities, and Refractive Indices of Binary Mixtures of Anisole with Benzene, Methylbenzene, Ethylbenzene, Propylbenzene, and Butylbenzene at (293.15 and 303.15) K
ρl [795.00; 892.80] kg/m3 [253.15; 373.15] Show Hide
ρl 892.80 kg/m3 253.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
ρl 892.60 kg/m3 253.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
ρl 864.47 kg/m3 288.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
ρl 864.70 kg/m3 288.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
ρl 860.00 kg/m3 293.00 KDB
ρl 860.51 kg/m3 293.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
ρl 860.17 kg/m3 293.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
ρl 860.69 kg/m3 293.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
ρl 861.26 kg/m3 293.15 Densities, Viscosities, and Refractive Indices of Binary Mixtures of Anisole with Benzene, Methylbenzene, Ethylbenzene, Propylbenzene, and Butylbenzene at (293.15 and 303.15) K
ρl 860.60 kg/m3 293.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
ρl 856.29 kg/m3 298.15 Thermodynamic study of 1,1,2,2-tetrachloroethane + hydrocarbon mixtures I. Excess and solvation enthalpies
at 1 kPa
ρl 856.29 kg/m3 298.15 Excess Enthalpies of Chloroalkylbenzene + Alkylbenzene Mixtures
at 1 kPa
ρl 856.68 kg/m3 298.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
ρl 856.23 kg/m3 298.15 Excess Molar Volumes of (propiophenone + benzene, or toluene, or ethylbenzene, or butylbenzene) at temperatures 298.15 K and 328.15 K
ρl 852.65 kg/m3 303.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
ρl 852.56 kg/m3 303.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
ρl 852.23 kg/m3 303.15 Densities, Viscosities, and Refractive Indices of Binary Mixtures of Anisole with Benzene, Methylbenzene, Ethylbenzene, Propylbenzene, and Butylbenzene at (293.15 and 303.15) K
ρl 851.30 kg/m3 303.15 Physical Properties of Binary Mixtures of Ethyl Formate with Benzene, Isopropyl Benzene, Isobutyl Benzene, and Butylbenzene at (303.15, 308.15, and 313.15) K
ρl 851.30 kg/m3 303.15 Density and Viscosity of Propyl Formate + Aromatic Hydrocarbons at T = (303.15, 308.15, and 313.15) K
ρl 852.13 kg/m3 303.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
ρl 852.49 kg/m3 303.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
ρl 848.00 kg/m3 308.15 Physical Properties of Binary Mixtures of Ethyl Formate with Benzene, Isopropyl Benzene, Isobutyl Benzene, and Butylbenzene at (303.15, 308.15, and 313.15) K
ρl 848.00 kg/m3 308.15 Density and Viscosity of Propyl Formate + Aromatic Hydrocarbons at T = (303.15, 308.15, and 313.15) K
ρl 844.60 kg/m3 313.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
ρl 844.60 kg/m3 313.15 Physical Properties of Binary Mixtures of Ethyl Formate with Benzene, Isopropyl Benzene, Isobutyl Benzene, and Butylbenzene at (303.15, 308.15, and 313.15) K
ρl 844.07 kg/m3 313.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
ρl 844.60 kg/m3 313.15 Density and Viscosity of Propyl Formate + Aromatic Hydrocarbons at T = (303.15, 308.15, and 313.15) K
ρl 844.50 kg/m3 313.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
ρl 844.43 kg/m3 313.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
ρl 835.98 kg/m3 323.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
ρl 836.41 kg/m3 323.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
ρl 836.51 kg/m3 323.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
ρl 836.34 kg/m3 323.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
ρl 832.29 kg/m3 328.15 Excess Molar Volumes of (propiophenone + benzene, or toluene, or ethylbenzene, or butylbenzene) at temperatures 298.15 K and 328.15 K
ρl 828.38 kg/m3 333.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
ρl 828.21 kg/m3 333.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
ρl 827.86 kg/m3 333.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
ρl 828.29 kg/m3 333.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
ρl 819.90 kg/m3 343.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
ρl 820.30 kg/m3 343.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
ρl 811.70 kg/m3 353.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
ρl 803.40 kg/m3 363.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
ρl 795.00 kg/m3 373.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
ΔfusS [59.50; 59.50] J/mol×K [184.60; 184.60] Show Hide
ΔfusS 59.50 J/mol×K 184.60 NISTHuffman, Parks, et al., 1931
ΔfusS 59.50 J/mol×K 184.60 NISTHuffman, Parks, et al., 1931, 2
csound,fluid [1201.40; 1373.70] m/s [288.15; 333.15] Show Hide
csound,fluid 1373.70 m/s 288.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
csound,fluid 1373.70 m/s 288.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
csound,fluid 1353.80 m/s 293.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
csound,fluid 1353.20 m/s 293.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
csound,fluid 1352.80 m/s 293.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
csound,fluid 1353.70 m/s 293.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
csound,fluid 1334.10 m/s 298.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
csound,fluid 1314.00 m/s 303.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
csound,fluid 1314.90 m/s 303.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
csound,fluid 1308.00 m/s 303.15 Physical Properties of Binary Mixtures of Ethyl Formate with Benzene, Isopropyl Benzene, Isobutyl Benzene, and Butylbenzene at (303.15, 308.15, and 313.15) K
csound,fluid 1314.50 m/s 303.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
csound,fluid 1314.30 m/s 303.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
csound,fluid 1292.00 m/s 308.15 Physical Properties of Binary Mixtures of Ethyl Formate with Benzene, Isopropyl Benzene, Isobutyl Benzene, and Butylbenzene at (303.15, 308.15, and 313.15) K
csound,fluid 1276.10 m/s 313.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
csound,fluid 1276.60 m/s 313.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
csound,fluid 1276.10 m/s 313.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
csound,fluid 1275.80 m/s 313.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
csound,fluid 1276.00 m/s 313.15 Physical Properties of Binary Mixtures of Ethyl Formate with Benzene, Isopropyl Benzene, Isobutyl Benzene, and Butylbenzene at (303.15, 308.15, and 313.15) K
csound,fluid 1238.40 m/s 323.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
csound,fluid 1238.70 m/s 323.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
csound,fluid 1238.20 m/s 323.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
csound,fluid 1238.40 m/s 323.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
csound,fluid 1201.50 m/s 333.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
csound,fluid 1201.40 m/s 333.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
csound,fluid 1201.70 m/s 333.15 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5
csound,fluid 1201.40 m/s 333.15 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
γ [0.03; 0.03] N/m [293.20; 295.00] Show Hide
γ 0.03 N/m 293.20 KDB
γ 0.03 N/m 294.20 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of Butylbenzene + Linear Alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa
γ 0.03 N/m 294.40 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Selected Ternary Mixtures of n-Butylcyclohexane + a Linear Alkane (n-Hexadcane or n-Dodecane) + an Aromatic Compound (Toluene, n-Butylbenzene, or n-Hexylbenzene)
γ 0.03 N/m 295.00 Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexylbenzene (1) or n-Butylbenzene (1) in 2,2,4,6,6-Pentamethylheptane (2) or 2,2,4,4,6,8,8-Heptamethylnonane (2) at 0.1 MPa
γ 0.03 N/m 295.00 Densities, Viscosities, Speeds of Sound, Bulk Moduli, Surface Tensions, and Flash Points of Quaternary Mixtures of n-Dodecane (1), n-Butylcyclohexane (2), n-Butylbenzene (3), and 2,2,4,4,6,8,8-Heptamethylnonane (4) at 0.1 MPa as Potential Surrogate Mixtures for Military Jet Fuel, JP-5

Correlations

Property Value Unit Temperature (K) Source
Cp,gas [125.56; 484.61] J/mol×K [200.00; 1500.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is Cp,gas in J/mol×K, T in K
Coefficient A9.74230e+01
Coefficient B-6.19620e+02
Coefficient C6.44224e+00
Coefficient D-3.28160e-05
Coefficient E-9.35020e-09
Temperature range, min.200.00
Temperature range, max.1500.00
Cp,gas 125.56 J/mol×K 200.00 Calculated Property
Cp,gas 200.03 J/mol×K 344.44 Calculated Property
Cp,gas 270.99 J/mol×K 488.89 Calculated Property
Cp,gas 327.72 J/mol×K 633.33 Calculated Property
Cp,gas 371.77 J/mol×K 777.78 Calculated Property
Cp,gas 406.06 J/mol×K 922.22 Calculated Property
Cp,gas 432.95 J/mol×K 1066.67 Calculated Property
Cp,gas 454.22 J/mol×K 1211.11 Calculated Property
Cp,gas 471.13 J/mol×K 1355.56 Calculated Property
Cp,gas 484.61 J/mol×K 1500.00 Calculated Property
Property Value Unit Temperature (K) Source
Cp,liquid [205.63; 293.00] J/mol×K [185.30; 400.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is Cp,liquid in J/mol×K, T in K
Coefficient A1.73590e+02
Coefficient B1.15140e+02
Coefficient C5.42345e-01
Coefficient D1.46310e-02
Coefficient E-1.18750e-05
Temperature range, min.185.30
Temperature range, max.400.00
Cp,liquid 205.63 J/mol×K 185.30 Calculated Property
Cp,liquid 211.44 J/mol×K 209.16 Calculated Property
Cp,liquid 218.33 J/mol×K 233.01 Calculated Property
Cp,liquid 226.33 J/mol×K 256.87 Calculated Property
Cp,liquid 235.39 J/mol×K 280.72 Calculated Property
Cp,liquid 245.47 J/mol×K 304.58 Calculated Property
Cp,liquid 256.46 J/mol×K 328.43 Calculated Property
Cp,liquid 268.20 J/mol×K 352.29 Calculated Property
Cp,liquid 280.47 J/mol×K 376.14 Calculated Property
Cp,liquid 293.00 J/mol×K 400.00 Calculated Property
Property Value Unit Temperature (K) Source
η [0.0102926; 0.0002386] Pa×s [200.00; 456.46] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = exp(A + B/T + C·ln(T) + D·T^E)
Y is η in Pa×s, T in K
Coefficient A-1.88290e+01
Coefficient B1.73770e+03
Coefficient C1.03850e+00
Coefficient D1.54680e-06
Coefficient E2.00000e+00
Temperature range, min.200.00
Temperature range, max.456.46
η 0.0102926 Pa×s 200.00 Calculated Property
η 0.0040760 Pa×s 228.50 Calculated Property
η 0.0020245 Pa×s 256.99 Calculated Property
η 0.0011776 Pa×s 285.49 Calculated Property
η 0.0007682 Pa×s 313.98 Calculated Property
η 0.0005461 Pa×s 342.48 Calculated Property
η 0.0004147 Pa×s 370.97 Calculated Property
η 0.0003317 Pa×s 399.47 Calculated Property
η 0.0002766 Pa×s 427.96 Calculated Property
η 0.0002386 Pa×s 456.46 Calculated Property
Property Value Unit Temperature (K) Source
ΔvapH [57.20; 0.00] kJ/mol [185.30; 660.50] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc
Y is ΔvapH in kJ/mol, T in K
Coefficient A6.56980e+01
Coefficient B3.08420e-01
Coefficient C6.70620e-01
Coefficient D-1.11350e+00
Coefficient E5.32760e-01
Critical temperature, Tc (K)6.60500e+02
Temperature range, min.185.30
Temperature range, max.660.50
ΔvapH 57.20 kJ/mol 185.30 Calculated Property
ΔvapH 54.20 kJ/mol 238.10 Calculated Property
ΔvapH 51.09 kJ/mol 290.90 Calculated Property
ΔvapH 47.87 kJ/mol 343.70 Calculated Property
ΔvapH 44.49 kJ/mol 396.50 Calculated Property
ΔvapH 40.84 kJ/mol 449.30 Calculated Property
ΔvapH 36.65 kJ/mol 502.10 Calculated Property
ΔvapH 31.45 kJ/mol 554.90 Calculated Property
ΔvapH 24.05 kJ/mol 607.70 Calculated Property
ΔvapH 0.00 kJ/mol 660.50 Calculated Property
Property Value Unit Temperature (K) Source
Pvap [1.33; 202.64] kPa [334.90; 486.52] The Yaws Handbook of Vapor Pressure Show Hide
Equationln(Y) = A + B/(T + C)
Y is Pvap in kPa, T in K
Coefficient A1.45284e+01
Coefficient B-3.96130e+03
Coefficient C-5.67370e+01
Temperature range, min.334.90
Temperature range, max.486.52
Pvap 1.33 kPa 334.90 Calculated Property
Pvap 3.01 kPa 351.75 Calculated Property
Pvap 6.21 kPa 368.59 Calculated Property
Pvap 11.91 kPa 385.44 Calculated Property
Pvap 21.43 kPa 402.29 Calculated Property
Pvap 36.51 kPa 419.13 Calculated Property
Pvap 59.33 kPa 435.98 Calculated Property
Pvap 92.52 kPa 452.83 Calculated Property
Pvap 139.13 kPa 469.67 Calculated Property
Pvap 202.64 kPa 486.52 Calculated Property
Pvap [1.69e-07; 2880.46] kPa [185.30; 660.50] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = exp(A + B/T + C·ln(T) + D·T^E)
Y is Pvap in kPa, T in K
Coefficient A9.32022e+01
Coefficient B-9.18660e+03
Coefficient C-1.13790e+01
Coefficient D5.85850e-06
Coefficient E2.00000e+00
Temperature range, min.185.30
Temperature range, max.660.50
Pvap 1.69e-07 kPa 185.30 Calculated Property
Pvap 6.61e-04 kPa 238.10 Calculated Property
Pvap 0.09 kPa 290.90 Calculated Property
Pvap 2.04 kPa 343.70 Calculated Property
Pvap 17.76 kPa 396.50 Calculated Property
Pvap 84.69 kPa 449.30 Calculated Property
Pvap 275.65 kPa 502.10 Calculated Property
Pvap 698.72 kPa 554.90 Calculated Property
Pvap 1499.70 kPa 607.70 Calculated Property
Pvap 2880.46 kPa 660.50 Calculated Property
Pvap [8.50e-08; 2894.10] kPa [185.30; 660.55] KDB Vapor Pressure Data Show Hide
Equationln(Y) = A + B/T + C·ln(T) + D·T² + E/T²
Y is Pvap in kPa, T in K
Coefficient A1.12433e+02
Coefficient B-1.01044e+04
Coefficient C-1.42573e+01
Coefficient D7.81134e-06
Coefficient E0.00000e+00
Temperature range, min.185.30
Temperature range, max.660.55
Pvap 8.50e-08 kPa 185.30 Calculated Property
Pvap 5.07e-04 kPa 238.11 Calculated Property
Pvap 0.08 kPa 290.91 Calculated Property
Pvap 2.01 kPa 343.72 Calculated Property
Pvap 17.83 kPa 396.52 Calculated Property
Pvap 84.94 kPa 449.33 Calculated Property
Pvap 274.55 kPa 502.13 Calculated Property
Pvap 692.53 kPa 554.94 Calculated Property
Pvap 1489.29 kPa 607.74 Calculated Property
Pvap 2894.10 kPa 660.55 Calculated Property
Pvap [6.40; 103.99] kPa [369.38; 457.48] NIST Show Hide
Equationln(Y) = A + B/(T + C)
Y is Pvap in kPa, T in K
Coefficient A1.40644e+01
Coefficient B-3.63340e+03
Coefficient C-7.17720e+01
ReferenceForziati, Norris, et al., 1949, 2
Temperature range, min.369.38
Temperature range, max.457.48
Pvap 6.40 kPa 369.38 Calculated Property
Pvap 9.44 kPa 379.17 Calculated Property
Pvap 13.59 kPa 388.96 Calculated Property
Pvap 19.15 kPa 398.75 Calculated Property
Pvap 26.45 kPa 408.54 Calculated Property
Pvap 35.87 kPa 418.32 Calculated Property
Pvap 47.85 kPa 428.11 Calculated Property
Pvap 62.84 kPa 437.90 Calculated Property
Pvap 81.37 kPa 447.69 Calculated Property
Pvap 103.99 kPa 457.48 Calculated Property
Pvap [6.40; 103.99] kPa [369.38; 457.48] NIST Show Hide
Equationln(Y) = A + B/(T + C)
Y is Pvap in kPa, T in K
Coefficient A1.40644e+01
Coefficient B-3.63340e+03
Coefficient C-7.17720e+01
ReferenceForziati, Norris, et al., 1949
Temperature range, min.369.38
Temperature range, max.457.48
Pvap 6.40 kPa 369.38 Calculated Property
Pvap 9.44 kPa 379.17 Calculated Property
Pvap 13.59 kPa 388.96 Calculated Property
Pvap 19.15 kPa 398.75 Calculated Property
Pvap 26.45 kPa 408.54 Calculated Property
Pvap 35.87 kPa 418.32 Calculated Property
Pvap 47.85 kPa 428.11 Calculated Property
Pvap 62.84 kPa 437.90 Calculated Property
Pvap 81.37 kPa 447.69 Calculated Property
Pvap 103.99 kPa 457.48 Calculated Property
Property Value Unit Temperature (K) Source
ρl [944.74; 269.73] kg/m3 [183.15; 660.50] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A / B^(1 + (1 − T/C)^D)
Y is ρl in kg/m3, T in K
Coefficient A6.79788e+01
Coefficient B2.52030e-01
Coefficient C6.60500e+02
Coefficient D2.92030e-01
Temperature range, min.183.15
Temperature range, max.660.50
ρl 944.74 kg/m3 183.15 Calculated Property
ρl 905.54 kg/m3 236.19 Calculated Property
ρl 864.55 kg/m3 289.23 Calculated Property
ρl 821.34 kg/m3 342.27 Calculated Property
ρl 775.26 kg/m3 395.31 Calculated Property
ρl 725.31 kg/m3 448.34 Calculated Property
ρl 669.74 kg/m3 501.38 Calculated Property
ρl 605.06 kg/m3 554.42 Calculated Property
ρl 521.80 kg/m3 607.46 Calculated Property
ρl 269.73 kg/m3 660.50 Calculated Property
Property Value Unit Temperature (K) Source
γ [0.04; 0.01] N/m [185.15; 456.15] Jasper (1972), surface tension of pure liquid compounds Compiled value Show Hide
EquationY = A + B·T + C·T² + D·T³ + E·T⁴
Y is γ in N/m, T in K
Coefficient A5.92779e-02
Coefficient B-1.02500e-04
Coefficient C0.00000e+00
Coefficient D0.00000e+00
Coefficient E0.00000e+00
Temperature range, min.185.15
Temperature range, max.456.15
γ 0.04 N/m 185.15 Calculated Property
γ 0.04 N/m 215.26 Calculated Property
γ 0.03 N/m 245.37 Calculated Property
γ 0.03 N/m 275.48 Calculated Property
γ 0.03 N/m 305.59 Calculated Property
γ 0.02 N/m 335.71 Calculated Property
γ 0.02 N/m 365.82 Calculated Property
γ 0.02 N/m 395.93 Calculated Property
γ 0.02 N/m 426.04 Calculated Property
γ 0.01 N/m 456.15 Calculated Property
γ [0.04; 1.15e-05] N/m [185.30; 654.32] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is γ in N/m, T in K
Coefficient A-7.77090e-03
Coefficient B3.92180e+01
Coefficient C-3.14020e+00
Coefficient D3.96890e-04
Coefficient E-4.75390e-06
CommentRange stopped where the equation turns negative; ChemSep gives it to 660.5 K.
Temperature range, min.185.30
Temperature range, max.654.32
γ 0.04 N/m 185.30 Calculated Property
γ 0.04 N/m 237.41 Calculated Property
γ 0.03 N/m 289.53 Calculated Property
γ 0.02 N/m 341.64 Calculated Property
γ 0.02 N/m 393.75 Calculated Property
γ 0.01 N/m 445.87 Calculated Property
γ 0.01 N/m 497.98 Calculated Property
γ 0.01 N/m 550.10 Calculated Property
γ 0.00 N/m 602.21 Calculated Property
γ 1.15e-05 N/m 654.32 Calculated Property
Property Value Unit Temperature (K) Source
λgas [0.00; 0.07] W/m×K [185.30; 1000.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A·T^B / (1 + C/T + D/T²)
Y is λgas in W/m×K, T in K
Coefficient A1.92250e-01
Coefficient B-1.10930e-03
Coefficient C-1.56740e+02
Coefficient D1.71240e+06
Temperature range, min.185.30
Temperature range, max.1000.00
λgas 0.00 W/m×K 185.30 Calculated Property
λgas 0.01 W/m×K 275.82 Calculated Property
λgas 0.01 W/m×K 366.34 Calculated Property
λgas 0.02 W/m×K 456.87 Calculated Property
λgas 0.03 W/m×K 547.39 Calculated Property
λgas 0.04 W/m×K 637.91 Calculated Property
λgas 0.05 W/m×K 728.43 Calculated Property
λgas 0.06 W/m×K 818.96 Calculated Property
λgas 0.07 W/m×K 909.48 Calculated Property
λgas 0.07 W/m×K 1000.00 Calculated Property
Property Value Unit Temperature (K) Source
λliquid [0.15; 0.09] W/m×K [185.30; 473.15] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is λliquid in W/m×K, T in K
Coefficient A8.12040e-02
Coefficient B2.45710e+02
Coefficient C-5.59460e+00
Coefficient D1.32200e-02
Coefficient E-2.50600e-05
Temperature range, min.185.30
Temperature range, max.473.15
λliquid 0.15 W/m×K 185.30 Calculated Property
λliquid 0.14 W/m×K 217.28 Calculated Property
λliquid 0.14 W/m×K 249.27 Calculated Property
λliquid 0.13 W/m×K 281.25 Calculated Property
λliquid 0.13 W/m×K 313.23 Calculated Property
λliquid 0.12 W/m×K 345.22 Calculated Property
λliquid 0.11 W/m×K 377.20 Calculated Property
λliquid 0.10 W/m×K 409.18 Calculated Property
λliquid 0.10 W/m×K 441.17 Calculated Property
λliquid 0.09 W/m×K 473.15 Calculated Property

Similar Compounds

Benzene, 1,1'-(1,4-butanediyl)bis-. Benzene, 1,4-dibutyl. Benzene, 1-butyl-4-propyl. Benzene, 1-butyl-4-ethyl. Benzene, pentyl-. 1-Butyl-4-methylbenzene. Benzene, hexyl-. Benzenebutanenitrile. Benzene, hexadecyl-. Benzene, octyl-. Benzene, dodecyl-. Benzene, tridecyl-. Pentadecylbenzene. Benzene, tetradecyl-. Benzene, decyl-.

Find more compounds similar to Benzene, n-butyl-.

Mixtures

Find more mixtures with Benzene, n-butyl-.

Sources

Note: Cheméo is only indexing the data, follow the source links to retrieve the latest data. The source is also providing more information like the publication year, authors and more. Take the time to validate and double check the source of the data.
Outlier This icon means that the value is more than 2 standard deviations away from the property mean.
Calculated This icon marks a calculated value or equation: a prediction, not a measurement.
Compiled This icon marks a compiled value or equation: taken from a data compilation such as ChemSep, not from an original measurement report.
These property values are available through the Cheméo API. A free account gives you an access key.