| Property | Value | Unit | Source |
|---|---|---|---|
| ω | [0.2320; 0.2341] |
|
|
| ω | 0.2320 | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value | |
| ω | 0.2321 | Passut and Danner (1973), critical constants and acentric factors Compiled value | |
| ω | 0.2341 | ChemSep v8.3 pure component data Compiled value | |
| ΔcH°liquid | -3335.74 ± 0.80 | kJ/mol | NIST Good and Smith, 1979 |
| Corresponding «DELTA»fHºliquid = -60.96 kJ/mol (simple calculation by NIST; no Washburn corrections) | |||
| μ | 0.510 | debye | ChemSep v8.3 pure component data Compiled value |
| ΔfG° | 66.68 | kJ/mol | ChemSep v8.3 pure component data Compiled value |
| ΔfH°gas | [-35.30; -34.80] | kJ/mol |
|
| ΔfH°gas | -35.30 | kJ/mol | ChemSep v8.3 pure component data Compiled value |
| ΔfH°gas | -35.10 ± 0.84 | kJ/mol | NIST Wiberg and Hao, 1991 |
| Heat of hydration | |||
| ΔfH°gas | -34.80 | kJ/mol | NIST Good and Smith, 1979 |
| Value computed using «DELTA»fHliquid° value of -60.96±0.84 kj/mol from Good and Smith, 1979 and «DELTA»vapH° value of 26.19 kj/mol from missing citation. | |||
| ΔfH°liquid | -60.96 ± 0.84 | kJ/mol | NISTGood and Smith, 1979 |
| ΔfusH° | 6.12 | kJ/mol | Joback Calculated Property |
| ΔvapH° | [25.90; 26.19] | kJ/mol |
|
| ΔvapH° | 26.19 | kJ/mol | NISTMajer and Svoboda, 1985 |
| ΔvapH° | 25.90 | kJ/mol | NISTReid, 1972 |
| ΔvapH° | 25.90 ± 0.10 | kJ/mol | NISTScott, Waddington, et al., 1949 |
| IE | [9.10; 9.35] | eV |
|
| IE | 9.12 ± 0.01 | eV | NISTN/A |
| IE | 9.10 | eV | NIST Traeger, 1986 |
| LBLHLM | |||
| IE | 9.15 ± 0.00 | eV | NISTMasclet, Grosjean, et al., 1973 |
| IE | 9.12 | eV | NISTLossing, 1972 |
| IE | Outlier 9.35 ± 0.08 | eV | NISTGross and Wilkins, 1971 |
| IE | 9.12 ± 0.02 | eV | NISTDemeo and El-Sayed, 1970 |
| IE | 9.12 ± 0.02 | eV | NISTWatanabe, Nakayama, et al., 1962 |
| IE | 9.20 ± 0.10 | eV | NIST Bieri, Burger, et al., 1977 |
| Vertical value | |||
| log10WS | [-2.73; -2.73] |
|
|
| log10WS | -2.73 | Aq. Solubility Prediction | |
| log10WS | -2.73 | Estimated Solubility | |
| logPoct/wat | 1.973 | Crippen Calculated Property | |
| McVol | 77.010 | ml/mol | McGowan Calculated Property |
| Pc | [3445.05; 3652.00] | kPa |
|
| Pc | 3652.00 | kPa | Vapor Pressures and Vapor Liquid Critical Properties of Four Pentene Isomers |
| Pc | 3445.05 | kPa | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value |
| Pc | 3447.38 | kPa | Passut and Danner (1973), critical constants and acentric factors Compiled value |
| Pc | 3447.00 | kPa | ChemSep v8.3 pure component data Compiled value |
| Ptriple | 2.05e-05 | kPa | ChemSep v8.3 pure component data Compiled value |
| ρc | 245.40 | kg/m3 | Vapor Pressures and Vapor Liquid Critical Properties of Four Pentene Isomers |
| Inp | [480.00; 523.00] |
|
|
| Inp | 495.60 | NIST Soják, Addová, et al., 2002 | |
| He; Column length: 150. m; Column diameter: 0.250 mm | |||
| Inp | 488.20 | NIST Soják, Addová, et al., 2002 | |
| He; Column length: 93. m; Column diameter: 0.250 mm | |||
| Inp | 490.00 | NISTLaub and Purnell, 1988 | |
| Inp | 490.00 | NISTLaub and Purnell, 1988 | |
| Inp | 491.00 | NISTLaub and Purnell, 1988 | |
| Inp | 495.00 | NIST Lubeck and Sutton, 1984 | |
| 60. m/0.264 mm/0.25 «mu»m, H2 | |||
| Inp | 495.00 | NIST Lubeck and Sutton, 1984 | |
| 50. m/0.21 mm/0.5 «mu»m, H2 | |||
| Inp | 494.00 | NIST Nijs and Jacobs, 1981 | |
| He; Column length: 150. m; Column diameter: 0.50 mm | |||
| Inp | 487.90 | NIST Bajus, Veselý, et al., 1979 | |
| Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 488.10 | NIST Bajus, Veselý, et al., 1979 | |
| Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 488.20 | NIST Bajus, Veselý, et al., 1979, 2 | |
| Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 488.48 | NIST Pacáková and Koslík, 1978 | |
| 50. m/0.2 mm/0.5 «mu»m, N2 | |||
| Inp | 488.00 | NISTChrétien and Dubois, 1977 | |
| Inp | 488.00 | NISTChretien and Dubois, 1976 | |
| Inp | 493.00 | NIST Lulova, Leont'eva, et al., 1976 | |
| He; Column length: 120. m; Column diameter: 0.25 mm | |||
| Inp | 488.00 | NIST Rijks and Cramers, 1974 | |
| N2; Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 488.00 | NIST Rijks and Cramers, 1974 | |
| N2; Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 487.63 | NIST Schomburg and Dielmann, 1973 | |
| Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 487.00 | NIST Takács, Tálas, et al., 1972 | |
| N2, Chromosorb W; Column length: 3. m | |||
| Inp | 500.00 | NIST Robinson and Odell, 1971 | |
| N2, Chromosorb W; Column length: 6.1 m | |||
| Inp | 500.00 | NIST Robinson and Odell, 1971 | |
| N2, Embacel; Column length: 3.0 m | |||
| Inp | 486.00 | NIST Matukuma, 1969 | |
| N2; Column length: 91.4 m; Column diameter: 0.25 mm | |||
| Inp | 488.00 | NIST Hively and Hinton, 1968 | |
| He, Chromosorb P; Column length: 15. m; Column diameter: 0.25 mm | |||
| Inp | 488.00 | NIST Hively and Hinton, 1968 | |
| He, Chromosorb P; Column length: 15. m; Column diameter: 0.25 mm | |||
| Inp | 489.00 | NIST Hively and Hinton, 1968 | |
| He, Chromosorb P; Column length: 15. m; Column diameter: 0.25 mm | |||
| Inp | 489.00 | NIST Hively and Hinton, 1968 | |
| He, Chromosorb P; Column length: 15. m; Column diameter: 0.25 mm | |||
| Inp | 497.00 | NIST Widmer, 1967 | |
| Diatoport S; Column length: 7.9 m | |||
| Inp | 486.00 | NIST Zulaïca and Guiochon, 1966 | |
| Column length: 10. m | |||
| Inp | 499.00 | NIST Wehrli and Kováts, 1959 | |
| Celite; Column length: 2.25 m | |||
| Inp | 500.00 | NIST Wehrli and Kováts, 1959 | |
| Celite; Column length: 2.25 m | |||
| Inp | 496.80 | NIST Haagen-Smit Laboratory, 1997 | |
| He; Column length: 100. m; Column diameter: 0.2 mm; Program: 5C(10min) => 5C/min => 50C(48min) => 1.5C/min => 195C(91min) | |||
| Inp | 497.00 | NIST Hoekman, 1993 | |
| 60. m/0.32 mm/1.0 «mu»m, He; Program: -40 C for 12 min; -40 - 125 C at 3 deg.min; 125-185 C at 6 deg/min; 185 - 220 C at 20 deg/min; hold 220 C for 2 min | |||
| Inp | 494.40 | NIST Soják, Addová, et al., 2002 | |
| He, 1. K/min; Column length: 150. m; Column diameter: 0.250 mm; Tstart: 30. C; Tend: 200. C | |||
| Inp | 496.00 | NIST Olson, Sinkevitch, et al., 1992 | |
| 4. K/min; Tstart: -40. C; Tend: 230. C | |||
| Inp | 493.58 | NIST White, Douglas, et al., 1992 | |
| 100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C | |||
| Inp | 493.79 | NIST White, Douglas, et al., 1992 | |
| 100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C | |||
| Inp | 494.00 | NIST White, Hackett, et al., 1992 | |
| 100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C | |||
| Inp | 487.80 | NIST Sojak, Addova, et al., 2000 | |
| He; Column length: 93. m; Column diameter: 0.25 mm | |||
| Inp | Outlier 523.00 | NIST Xieyun, Maoqi, et al., 1996 | |
| N2; Column length: 40. m; Column diameter: 0.25 mm | |||
| Inp | 488.00 | NIST N/A | |
| N2; Column length: 74.6 m; Column diameter: 0.28 mm | |||
| Inp | 488.00 | NISTSchomburg, 1966 | |
| Inp | Outlier 506.00 | NIST Huguet, 1961 | |
| Nitrogen, Celite C-22; Column length: 2.5 m | |||
| Inp | 495.00 | NIST Bramston-Cook, 2013 | |
| 60. m/0.25 mm/1.0 «mu»m, Helium, 45. C @ 1.45 min, 3.6 K/min, 210. C @ 2.72 min | |||
| Inp | 496.00 | NIST Supelco, 2012 | |
| 100. m/0.25 mm/0.50 «mu»m, Helium, 20. C @ 15. min, 15. K/min, 220. C @ 30. min | |||
| Inp | Outlier 480.00 | NIST Tsuge, Ohtan, et al., 2011 | |
| 30. m/0.25 mm/0.25 «mu»m, 40. C @ 2. min, 20. K/min, 320. C @ 13. min | |||
| Inp | 495.00 | NIST Zenkevich, Makarov A.A., et al., 2009 | |
| 30. m/0.25 mm/0.25 «mu»m, Helium, 2. K/min, 220. C @ 10. min; Tstart: 50. C | |||
| Inp | 493.00 | NIST Zhang, Ding, et al., 2009 | |
| 50. m/0.20 mm/0.50 «mu»m, Nitrogen, 35. C @ 15. min, 2. K/min, 200. C @ 10. min | |||
| Inp | 493.00 | NIST Guan, Li, et al., 1995 | |
| 60. C @ 2. min, 4. K/min; Column length: 50. m; Column diameter: 0.32 mm; Tend: 200. C | |||
| Inp | 495.00 | NIST Ramnas, Ostermark, et al., 1994 | |
| 50. m/0.32 mm/1.0 «mu»m, He, 2. K/min; Tstart: -20. C | |||
| Inp | 493.00 | NIST Ciccioli, Cecinato, et al., 1992 | |
| 60. m/0.32 mm/1.2 «mu»m, He, 30. C @ 10. min, 3. K/min; Tend: 240. C | |||
| Inp | 489.00 | NIST Chen and Feng, 2007 | |
| Program: not specified | |||
| Inp | 496.00 | NIST Blunden, Aneja, et al., 2005 | |
| 60. m/0.32 mm/1.0 «mu»m, Helium; Program: -50 0C (2 min) 8 0C/min -> 200 0C (7.75 min) 25 0C -> 225 0C (8 min) | |||
| Inp | 488.00 | NIST Junkes, Castanho, et al., 2003 | |
| Program: not specified | |||
| Inp | 497.00 | NIST Perkin Elmer Instruments, 2002 | |
| Column length: 100. m; Phase thickness: 0.50 «mu»m; Program: not specified | |||
| Inp | 494.00 | NIST Tirillini, Verdelli, et al., 2000 | |
| 50. m/0.32 mm/0.4 «mu»m; Program: 0C (3min) => 3C/min => 50C => 5C/min => 220C (30min) | |||
| Inp | 496.00 | NIST Spieksma, 1999 | |
| Program: not specified | |||
| Inp | 494.00 | NIST Zenkevich, 1996 | |
| Program: not specified | |||
| Inp | 493.00 | NIST Robinson and Odell, 1971 | |
| N2, Chromosorb W; Column length: 6.1 m; Program: 50C910min) => 20C/min => 90(6min) => 10C/min => 150C(hold) | |||
| Inp | 487.00 | NIST Robinson and Odell, 1971 | |
| N2, Embacel; Column length: 3.0 m; Program: 25C(5min) => 2C/min => 35 => 4C/min => 95C(hold) | |||
| Inp | 493.00 | NIST Robinson and Odell, 1971, 2 | |
| Chrom W; Column length: 6.1 m; Program: 50C(10min) => 20C/min(2min) => 90C(6min) => 10C/min(6min) => (hold at 150C) | |||
| Inp | 487.00 | NIST Robinson and Odell, 1971, 2 | |
| Embacel; Column length: 3.0 m; Program: 25C(5min) => 2C/min(5min) => 4C/min(15min) => (hold at 95C) | |||
| Inp | 489.00 | NISTMSDC-RI | |
| Inp | 496.00 | NISTMSDC-RI | |
| Inp | 487.00 | NISTMSDC-RI | |
| Inp | 496.80 | NISTMSDC-RI | |
| Ip | [534.00; 575.00] |
|
|
| Ip | 545.00 | NIST Widmer, 1967 | |
| Diatoport P; Column length: 7.9 m | |||
| Ip | 534.00 | NIST Widmer, 1967 | |
| Diatoport P; Column length: 7.9 m | |||
| Ip | 575.00 | NIST Girard and Durance, 2000 | |
| 60. m/0.25 mm/0.25 «mu»m, He, 35. C @ 10. min, 4. K/min; Tend: 200. C | |||
| Ip | 575.00 | NISTMSDC-RI | |
| S°liquid | [253.97; 254.00] | J/mol×K |
|
| S°liquid | 254.00 | J/mol×K | NISTChao, Hall, et al., 1983 |
| S°liquid | 253.97 | J/mol×K | NISTTodd, Oliver, et al., 1947 |
| Tboil | [303.45; 311.00] | K |
|
| Tboil | 304.31 | K | ChemSep v8.3 pure component data Compiled value |
| Tboil | 304.40 | K | NISTWeast and Grasselli, 1989 |
| Tboil | 304.30 | K | NISTMajer and Svoboda, 1985 |
| Tboil | 304.20 ± 1.00 | K | NISTGorin, Galkina, et al., 1966 |
| Tboil | 304.60 ± 0.50 | K | NISTKaal. T.A., Ordyan, et al., 1965 |
| Tboil | 304.20 ± 0.40 | K | NISTSamartsev and Ogloblin, 1965 |
| Tboil | 304.20 ± 0.60 | K | NISTEidus, Puzitskii, et al., 1960 |
| Tboil | 304.31 ± 0.30 | K | NISTDesty and Whyman, 1957 |
| Tboil | 303.50 ± 2.50 | K | NISTPines and Arrigo, 1957 |
| Tboil | 304.50 ± 2.00 | K | NISTRobertson, Heyes, et al., 1952 |
| Tboil | 304.40 ± 0.30 | K | NISTDesty and Fidler, 1951 |
| Tboil | 304.35 ± 0.50 | K | NISTParker and Goldblatt, 1950 |
| Tboil | 304.65 ± 0.50 | K | NISTParker and Goldblatt, 1950 |
| Tboil | 304.05 ± 0.50 | K | NISTDerfer, Greenlee, et al., 1949 |
| Tboil | 304.10 ± 0.50 | K | NISTFoehr and Fenske, 1949 |
| Tboil | 304.15 ± 1.00 | K | NISTLarin and Frost, 1948 |
| Tboil | 304.20 ± 0.40 | K | NISTThornton and Herald, 1948 |
| Tboil | 304.20 ± 0.30 | K | NISTAnonymous, 1947 |
| Tboil | 304.27 ± 0.40 | K | NISTCleaves and Sherrick, 1947 |
| Tboil | 304.20 ± 0.15 | K | NISTFenske, Braun, et al., 1947 |
| Tboil | 304.20 ± 0.30 | K | NISTBoord, Greenlee, et al., 1946 |
| Tboil | 304.30 ± 0.30 | K | NISTGerding and van der Vet, 1946 |
| Tboil | 304.27 ± 0.30 | K | NISTSlabey, 1946 |
| Tboil | 304.15 ± 1.00 | K | NISTMoldavskii and Zharkova, 1944 |
| Tboil | 304.05 ± 1.00 | K | NISTVan Arkel, Meerburg, et al., 1942 |
| Tboil | 304.15 ± 0.30 | K | NISTEwell and Hardy, 1941 |
| Tboil | 304.20 ± 0.15 | K | NISTCarr and Walter, 1936 |
| Tboil | 304.20 ± 0.20 | K | NISTSherrill and Walter, 1936 |
| Tboil | 305.10 ± 1.50 | K | NISTChurch, Whitmore, et al., 1934 |
| Tboil | 304.50 ± 1.00 | K | NISTHyman and Wagner, 1930 |
| Tboil | 303.65 ± 2.00 | K | NISTMidgley and Henne, 1929 |
| Tboil | 305.00 ± 3.00 | K | NISTNorris and Joubert, 1927 |
| Tboil | Outlier 311.00 ± 2.00 | K | NIST Kern, Shriner, et al., 1925 |
| Data excluded from overall average | |||
| Tboil | 303.45 ± 3.00 | K | NISTFaraghen, Gruse, et al., 1921 |
| Tboil | 304.15 ± 2.00 | K | NISTPicon, 1919 |
| Tboil | Outlier 307.15 ± 2.00 | K | NIST Brooks and Humphrey, 1918 |
| Data excluded from overall average | |||
| Tboil | 306.15 ± 2.00 | K | NIST Walker and Wood, 1906 |
| Data excluded from overall average | |||
| Tboil | 305.15 ± 2.00 | K | NISTFittig, 1880 |
| Tboil | 304.65 ± 2.00 | K | NISTLebel, 1876 |
| Tc | [465.00; 470.00] | K |
|
| Tc | 467.90 | K | Vapor Pressures and Vapor Liquid Critical Properties of Four Pentene Isomers |
| Tc | 467.00 | K | Gas-Liquid Critical Temperatures of Some Alkenes, Amines, and Cyclic Hydrocarbons |
| Tc | 465.00 | K | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value |
| Tc | 465.37 | K | Passut and Danner (1973), critical constants and acentric factors Compiled value |
| Tc | 465.00 | K | ChemSep v8.3 pure component data Compiled value |
| Tc | 470.00 | K | NISTMajer and Svoboda, 1985 |
| Tfus | [134.97; 138.95] | K |
|
| Tfus | 135.90 | K | Jean-Claude Bradley Open Melting Point Dataset (2014, CC0) Compiled value |
| Tfus | 135.58 | K | ChemSep v8.3 pure component data Compiled value |
| Tfus | 135.77 | K | Aq. Solubility Prediction |
| Tfus | Outlier 138.95 ± 0.30 | K | NISTTimmermans, 1952 |
| Tfus | 135.09 ± 0.30 | K | NISTDerfer, Greenlee, et al., 1949 |
| Tfus | 134.97 ± 0.40 | K | NISTBoord, Greenlee, et al., 1946 |
| Tfus | 135.56 ± 0.06 | K | NISTStreiff, Murphy, et al., 1946 |
| Tfus | 135.56 ± 0.05 | K | NISTStreiff, Murphy, et al., 1946 |
| Tfus | 135.59 ± 0.03 | K | NISTStreiff, Murphy, et al., 1946 |
| Ttriple | [135.58; 135.63] | K |
|
| Ttriple | 135.63 | K | Staveley, Lobo and Calado (1981), triple points Compiled value |
| Ttriple | 135.58 | K | ChemSep v8.3 pure component data Compiled value |
| Ttriple | 135.60 ± 0.02 | K | NISTChao, Hall, et al., 1983, 2 |
| Ttriple | 135.62 ± 0.02 | K | NISTTodd, Oliver, et al., 1947, 2 |
| Ttriple | 135.60 ± 0.02 | K | NISTChao, Hall, et al., 1983 |
| Ttriple | 135.62 ± 0.02 | K | NISTTodd, Oliver, et al., 1947 |
| UQi | 3.22 | ChemSep v8.3 pure component data Compiled value | |
| URi | 3.59 | ChemSep v8.3 pure component data Compiled value | |
| Vc | [0.292; 0.294] | m3/kmol |
|
| Vc | 0.294 | m3/kmol | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value |
| Vc | 0.292 | m3/kmol | ChemSep v8.3 pure component data Compiled value |
| VCOSTALD | 0.0833 | m3/kmol | Hankinson and Thomson (1979), COSTALD parameters Compiled value |
| ωSRK | 0.235 | Hankinson and Thomson (1979), COSTALD parameters Compiled value | |
| Zc | 0.2600000 | ChemSep v8.3 pure component data Compiled value | |
| Zra | [0.263; 0.270] |
|
|
| Zra | 0.263 | Hankinson and Thomson (1979), COSTALD parameters Compiled value | |
| Zra | 0.270 | ChemSep v8.3 pure component data Compiled value | |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| Cp,gas | [89.29; 289.90] | J/mol×K | [200.00; 1500.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is Cp,gas in J/mol×K, T in K | |||
| Coefficient A | 8.12180e+01 | |||
| Coefficient B | -8.03240e+02 | |||
| Coefficient C | 6.16924e+00 | |||
| Coefficient D | -3.41590e-04 | |||
| Coefficient E | 9.75360e-08 | |||
| Temperature range, min. | 200.00 | |||
| Temperature range, max. | 1500.00 | |||
| Cp,gas | 89.29 | J/mol×K | 200.00 | Calculated Property |
| Cp,gas | 122.95 | J/mol×K | 344.44 | Calculated Property |
| Cp,gas | 161.26 | J/mol×K | 488.89 | Calculated Property |
| Cp,gas | 193.81 | J/mol×K | 633.33 | Calculated Property |
| Cp,gas | 219.57 | J/mol×K | 777.78 | Calculated Property |
| Cp,gas | 239.79 | J/mol×K | 922.22 | Calculated Property |
| Cp,gas | 255.87 | J/mol×K | 1066.67 | Calculated Property |
| Cp,gas | 269.02 | J/mol×K | 1211.11 | Calculated Property |
| Cp,gas | 280.13 | J/mol×K | 1355.56 | Calculated Property |
| Cp,gas | 289.90 | J/mol×K | 1500.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| Cp,liquid | [133.05; 159.05] | J/mol×K | [135.58; 304.31] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is Cp,liquid in J/mol×K, T in K | |||
| Coefficient A | 1.21560e+02 | |||
| Coefficient B | 5.27310e+02 | |||
| Coefficient C | -5.67866e+00 | |||
| Coefficient D | 3.62950e-02 | |||
| Coefficient E | -3.75250e-05 | |||
| Temperature range, min. | 135.58 | |||
| Temperature range, max. | 304.31 | |||
| Cp,liquid | 133.05 | J/mol×K | 135.58 | Calculated Property |
| Cp,liquid | 133.10 | J/mol×K | 154.33 | Calculated Property |
| Cp,liquid | 134.06 | J/mol×K | 173.08 | Calculated Property |
| Cp,liquid | 135.74 | J/mol×K | 191.82 | Calculated Property |
| Cp,liquid | 138.08 | J/mol×K | 210.57 | Calculated Property |
| Cp,liquid | 141.06 | J/mol×K | 229.32 | Calculated Property |
| Cp,liquid | 144.70 | J/mol×K | 248.07 | Calculated Property |
| Cp,liquid | 148.95 | J/mol×K | 266.81 | Calculated Property |
| Cp,liquid | 153.77 | J/mol×K | 285.56 | Calculated Property |
| Cp,liquid | 159.05 | J/mol×K | 304.31 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| η | [0.0036716; 0.0001335] | Pa×s | [135.58; 373.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = exp(A + B/T + C·ln(T) + D·T^E) Y is η in Pa×s, T in K | |||
| Coefficient A | -1.00650e+01 | |||
| Coefficient B | 6.90040e+02 | |||
| Coefficient C | -1.30440e-01 | |||
| Coefficient D | 4.74500e-07 | |||
| Coefficient E | 2.00000e+00 | |||
| Temperature range, min. | 135.58 | |||
| Temperature range, max. | 373.00 | |||
| η | 0.0036716 | Pa×s | 135.58 | Calculated Property |
| η | 0.0015717 | Pa×s | 161.96 | Calculated Property |
| η | 0.0008522 | Pa×s | 188.34 | Calculated Property |
| η | 0.0005368 | Pa×s | 214.72 | Calculated Property |
| η | 0.0003741 | Pa×s | 241.10 | Calculated Property |
| η | 0.0002801 | Pa×s | 267.48 | Calculated Property |
| η | 0.0002210 | Pa×s | 293.86 | Calculated Property |
| η | 0.0001815 | Pa×s | 320.24 | Calculated Property |
| η | 0.0001538 | Pa×s | 346.62 | Calculated Property |
| η | 0.0001335 | Pa×s | 373.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| ΔvapH | [34.44; 0.00] | kJ/mol | [135.58; 465.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc Y is ΔvapH in kJ/mol, T in K | |||
| Coefficient A | 4.63740e+01 | |||
| Coefficient B | 1.42140e+00 | |||
| Coefficient C | -2.57890e+00 | |||
| Coefficient D | 2.55160e+00 | |||
| Coefficient E | -9.54540e-01 | |||
| Critical temperature, Tc (K) | 4.65000e+02 | |||
| Temperature range, min. | 135.58 | |||
| Temperature range, max. | 465.00 | |||
| ΔvapH | 34.44 | kJ/mol | 135.58 | Calculated Property |
| ΔvapH | 32.51 | kJ/mol | 172.18 | Calculated Property |
| ΔvapH | 30.71 | kJ/mol | 208.78 | Calculated Property |
| ΔvapH | 28.89 | kJ/mol | 245.39 | Calculated Property |
| ΔvapH | 26.93 | kJ/mol | 281.99 | Calculated Property |
| ΔvapH | 24.70 | kJ/mol | 318.59 | Calculated Property |
| ΔvapH | 22.06 | kJ/mol | 355.19 | Calculated Property |
| ΔvapH | 18.78 | kJ/mol | 391.80 | Calculated Property |
| ΔvapH | 14.23 | kJ/mol | 428.40 | Calculated Property |
| ΔvapH | 0.00 | kJ/mol | 465.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| Pvap | [2.00e-05; 3523.96] | kPa | [135.58; 465.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = exp(A + B/T + C·ln(T) + D·T^E) Y is Pvap in kPa, T in K | |||
| Coefficient A | 7.03853e+01 | |||
| Coefficient B | -5.30415e+03 | |||
| Coefficient C | -8.60760e+00 | |||
| Coefficient D | 9.51346e-06 | |||
| Coefficient E | 2.00000e+00 | |||
| Temperature range, min. | 135.58 | |||
| Temperature range, max. | 465.00 | |||
| Pvap | 2.00e-05 | kPa | 135.58 | Calculated Property |
| Pvap | 0.01 | kPa | 172.18 | Calculated Property |
| Pvap | 0.56 | kPa | 208.78 | Calculated Property |
| Pvap | 7.22 | kPa | 245.39 | Calculated Property |
| Pvap | 43.34 | kPa | 281.99 | Calculated Property |
| Pvap | 162.18 | kPa | 318.59 | Calculated Property |
| Pvap | 447.13 | kPa | 355.19 | Calculated Property |
| Pvap | 1006.09 | kPa | 391.80 | Calculated Property |
| Pvap | 1973.08 | kPa | 428.40 | Calculated Property |
| Pvap | 3523.96 | kPa | 465.00 | Calculated Property |
| Pvap | [2.01e-05; 3528.87] | kPa | [135.58; 465.00] |
KDB Vapor Pressure Data
|
| Equation | ln(Y) = A + B/T + C·ln(T) + D·T² + E/T² Y is Pvap in kPa, T in K | |||
| Coefficient A | 6.78967e+01 | |||
| Coefficient B | -5.23519e+03 | |||
| Coefficient C | -8.20067e+00 | |||
| Coefficient D | 8.78420e-06 | |||
| Coefficient E | 0.00000e+00 | |||
| Temperature range, min. | 135.58 | |||
| Temperature range, max. | 465.00 | |||
| Pvap | 2.01e-05 | kPa | 135.58 | Calculated Property |
| Pvap | 0.01 | kPa | 172.18 | Calculated Property |
| Pvap | 0.55 | kPa | 208.78 | Calculated Property |
| Pvap | 7.13 | kPa | 245.39 | Calculated Property |
| Pvap | 43.07 | kPa | 281.99 | Calculated Property |
| Pvap | 162.07 | kPa | 318.59 | Calculated Property |
| Pvap | 448.61 | kPa | 355.19 | Calculated Property |
| Pvap | 1011.27 | kPa | 391.80 | Calculated Property |
| Pvap | 1982.07 | kPa | 428.40 | Calculated Property |
| Pvap | 3528.87 | kPa | 465.00 | Calculated Property |
| Pvap | [31.16; 270.01] | kPa | [274.30; 335.82] |
NIST
|
| Equation | ln(Y) = A + B/(T + C) Y is Pvap in kPa, T in K | |||
| Coefficient A | 1.37845e+01 | |||
| Coefficient B | -2.41267e+03 | |||
| Coefficient C | -4.10890e+01 | |||
| Reference | Scott, Waddington, et al., 1949 | |||
| Comment | Coefficents calculated by NIST from author's data. | |||
| Temperature range, min. | 274.30 | |||
| Temperature range, max. | 335.82 | |||
| Pvap | 31.16 | kPa | 274.30 | Calculated Property |
| Pvap | 41.83 | kPa | 281.14 | Calculated Property |
| Pvap | 55.25 | kPa | 287.97 | Calculated Property |
| Pvap | 71.89 | kPa | 294.81 | Calculated Property |
| Pvap | 92.26 | kPa | 301.64 | Calculated Property |
| Pvap | 116.91 | kPa | 308.48 | Calculated Property |
| Pvap | 146.39 | kPa | 315.31 | Calculated Property |
| Pvap | 181.32 | kPa | 322.15 | Calculated Property |
| Pvap | 222.31 | kPa | 328.98 | Calculated Property |
| Pvap | 270.01 | kPa | 335.82 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| ρl | [794.74; 240.20] | kg/m3 | [135.58; 465.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A / B^(1 + (1 − T/C)^D) Y is ρl in kg/m3, T in K | |||
| Coefficient A | 6.42572e+01 | |||
| Coefficient B | 2.67520e-01 | |||
| Coefficient C | 4.65000e+02 | |||
| Coefficient D | 2.81650e-01 | |||
| Temperature range, min. | 135.58 | |||
| Temperature range, max. | 465.00 | |||
| ρl | 794.74 | kg/m3 | 135.58 | Calculated Property |
| ρl | 764.31 | kg/m3 | 172.18 | Calculated Property |
| ρl | 732.34 | kg/m3 | 208.78 | Calculated Property |
| ρl | 698.47 | kg/m3 | 245.39 | Calculated Property |
| ρl | 662.13 | kg/m3 | 281.99 | Calculated Property |
| ρl | 622.47 | kg/m3 | 318.59 | Calculated Property |
| ρl | 578.00 | kg/m3 | 355.19 | Calculated Property |
| ρl | 525.74 | kg/m3 | 391.80 | Calculated Property |
| ρl | 457.55 | kg/m3 | 428.40 | Calculated Property |
| ρl | 240.20 | kg/m3 | 465.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| γ | [0.0346; 0.0153] | N/m | [135.55; 304.15] |
Jasper (1972), surface tension of pure liquid compounds Compiled value
|
| Equation | Y = A + B·T + C·T² + D·T³ + E·T⁴ Y is γ in N/m, T in K | |||
| Coefficient A | 5.01676e-02 | |||
| Coefficient B | -1.14800e-04 | |||
| Coefficient C | 0.00000e+00 | |||
| Coefficient D | 0.00000e+00 | |||
| Coefficient E | 0.00000e+00 | |||
| Temperature range, min. | 135.55 | |||
| Temperature range, max. | 304.15 | |||
| γ | 0.0346 | N/m | 135.55 | Calculated Property |
| γ | 0.0325 | N/m | 154.28 | Calculated Property |
| γ | 0.0303 | N/m | 173.02 | Calculated Property |
| γ | 0.0282 | N/m | 191.75 | Calculated Property |
| γ | 0.0260 | N/m | 210.48 | Calculated Property |
| γ | 0.0239 | N/m | 229.22 | Calculated Property |
| γ | 0.0217 | N/m | 247.95 | Calculated Property |
| γ | 0.0196 | N/m | 266.68 | Calculated Property |
| γ | 0.0174 | N/m | 285.42 | Calculated Property |
| γ | 0.0153 | N/m | 304.15 | Calculated Property |
| γ | [0.0368; 2.97e-06] | N/m | [135.58; 462.04] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is γ in N/m, T in K | |||
| Coefficient A | -8.78280e-03 | |||
| Coefficient B | 4.26350e+01 | |||
| Coefficient C | -3.41740e+00 | |||
| Coefficient D | 1.42700e-03 | |||
| Coefficient E | -9.69110e-06 | |||
| Comment | Range stopped where the equation turns negative; ChemSep gives it to 465 K. | |||
| Temperature range, min. | 135.58 | |||
| Temperature range, max. | 462.04 | |||
| γ | 0.0368 | N/m | 135.58 | Calculated Property |
| γ | 0.0316 | N/m | 171.85 | Calculated Property |
| γ | 0.0268 | N/m | 208.13 | Calculated Property |
| γ | 0.0222 | N/m | 244.40 | Calculated Property |
| γ | 0.0178 | N/m | 280.67 | Calculated Property |
| γ | 0.0135 | N/m | 316.94 | Calculated Property |
| γ | 0.00950 | N/m | 353.22 | Calculated Property |
| γ | 0.00588 | N/m | 389.49 | Calculated Property |
| γ | 0.00271 | N/m | 425.76 | Calculated Property |
| γ | 2.97e-06 | N/m | 462.04 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| λgas | [0.00185; 0.0977] | W/m×K | [135.58; 1000.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A·T^B / (1 + C/T + D/T²) Y is λgas in W/m×K, T in K | |||
| Coefficient A | 1.80880e-04 | |||
| Coefficient B | 9.41010e-01 | |||
| Coefficient C | 7.78570e+01 | |||
| Coefficient D | 1.53680e+05 | |||
| Temperature range, min. | 135.58 | |||
| Temperature range, max. | 1000.00 | |||
| λgas | 0.00185 | W/m×K | 135.58 | Calculated Property |
| λgas | 0.00723 | W/m×K | 231.62 | Calculated Property |
| λgas | 0.0158 | W/m×K | 327.67 | Calculated Property |
| λgas | 0.0263 | W/m×K | 423.72 | Calculated Property |
| λgas | 0.0378 | W/m×K | 519.77 | Calculated Property |
| λgas | 0.0498 | W/m×K | 615.81 | Calculated Property |
| λgas | 0.0619 | W/m×K | 711.86 | Calculated Property |
| λgas | 0.0739 | W/m×K | 807.91 | Calculated Property |
| λgas | 0.0859 | W/m×K | 903.95 | Calculated Property |
| λgas | 0.0977 | W/m×K | 1000.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| λliquid | [0.155; 0.106] | W/m×K | [135.58; 304.30] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is λliquid in W/m×K, T in K | |||
| Coefficient A | -2.40460e-02 | |||
| Coefficient B | 2.46540e+00 | |||
| Coefficient C | -1.59310e+00 | |||
| Coefficient D | -7.43250e-04 | |||
| Coefficient E | -2.47450e-06 | |||
| Temperature range, min. | 135.58 | |||
| Temperature range, max. | 304.30 | |||
| λliquid | 0.155 | W/m×K | 135.58 | Calculated Property |
| λliquid | 0.150 | W/m×K | 154.33 | Calculated Property |
| λliquid | 0.144 | W/m×K | 173.07 | Calculated Property |
| λliquid | 0.139 | W/m×K | 191.82 | Calculated Property |
| λliquid | 0.134 | W/m×K | 210.57 | Calculated Property |
| λliquid | 0.128 | W/m×K | 229.31 | Calculated Property |
| λliquid | 0.123 | W/m×K | 248.06 | Calculated Property |
| λliquid | 0.117 | W/m×K | 266.81 | Calculated Property |
| λliquid | 0.111 | W/m×K | 285.55 | Calculated Property |
| λliquid | 0.106 | W/m×K | 304.30 | Calculated Property |
Find more compounds similar to 1-Butene, 2-methyl-.
Note: Cheméo is only indexing the data, follow the source links to retrieve the latest data. The source is also providing more information like the publication year, authors and more.
Take the time to validate and double check the source of the data.
Outlier This icon means
that the value is more than 2 standard deviations away from the
property mean.
Calculated This icon marks a calculated value or equation: a prediction, not a measurement.
Compiled This icon marks a compiled value or equation: taken from a data compilation such as ChemSep, not from an original measurement report.
These property values are available through the Cheméo API. A free account gives you an access key.