| Property | Value | Unit | Source |
|---|---|---|---|
| ω | [0.2090; 0.2285] |
|
|
| ω | 0.2274 | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value | |
| ω | 0.2285 | Passut and Danner (1973), critical constants and acentric factors Compiled value | |
| ω | 0.2110 | ChemSep v8.3 pure component data Compiled value | |
| ω | 0.2090 | KDB | |
| ΔcH°liquid | -3345.10 ± 0.54 | kJ/mol | NIST Good and Smith, 1979 |
| Corresponding «DELTA»fHºliquid = -51.60 kJ/mol (simple calculation by NIST; no Washburn corrections) | |||
| μ | 0.32 | debye | ChemSep v8.3 pure component data Compiled value |
| ΔfG° | [74.82; 76.05] | kJ/mol |
|
| ΔfG° | 76.05 | kJ/mol | ChemSep v8.3 pure component data Compiled value |
| ΔfG° | 74.82 | kJ/mol | KDB |
| Δc,grossH | 3343.31 | kJ/mol | KDB |
| Δc,netH | 3123.230 | kJ/mol | KDB |
| ΔfH°gas | [-28.97; -25.50] | kJ/mol |
|
| ΔfH°gas | -27.60 | kJ/mol | ChemSep v8.3 pure component data Compiled value |
| ΔfH°gas | -28.97 | kJ/mol | KDB |
| ΔfH°gas | -25.50 | kJ/mol | NIST Good and Smith, 1979 |
| Value computed using «DELTA»fHliquid° value of -51.6±0.62 kj/mol from Good and Smith, 1979 and «DELTA»vapH° value of 26.1 kj/mol from alkenes correlation. | |||
| ΔfH°liquid | -51.60 ± 0.62 | kJ/mol | NISTGood and Smith, 1979 |
| ΔfusH° | 3.90 | kJ/mol | Joback Calculated Property |
| ΔvapH° | 23.90 | kJ/mol | NISTReid, 1972 |
| IE | [9.50; 9.60] | eV |
|
| IE | 9.52 ± 0.01 | eV | NISTN/A |
| IE | 9.53 ± 0.00 | eV | NISTMasclet, Grosjean, et al., 1973 |
| IE | 9.52 | eV | NISTLossing, 1972 |
| IE | Outlier 9.60 ± 0.03 | eV | NISTGross and Wilkins, 1971 |
| IE | 9.52 | eV | NISTDewar and Worley, 1969 |
| IE | 9.51 ± 0.03 | eV | NISTWatanabe, Nakayama, et al., 1962 |
| IE | 9.50 ± 0.10 | eV | NIST Bieri, Burger, et al., 1977 |
| Vertical value | |||
| log10WS | [-2.73; -2.73] |
|
|
| log10WS | -2.73 | Aq. Solubility Prediction | |
| log10WS | -2.73 | Estimated Solubility | |
| logPoct/wat | 1.828 | Crippen Calculated Property | |
| McVol | 77.010 | ml/mol | McGowan Calculated Property |
| NFPA Fire | 4 | KDB | |
| NFPA Health | 2 | KDB | |
| Pc | [3463.00; 3550.00] | kPa |
|
| Pc | Outlier 3463.00 | kPa | Vapor Pressures and Vapor Liquid Critical Properties of Four Pentene Isomers |
| Pc | 3530.00 | kPa | IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 6 Compiled value |
| Pc | 3515.98 | kPa | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value |
| Pc | 3516.33 | kPa | Passut and Danner (1973), critical constants and acentric factors Compiled value |
| Pc | 3550.00 | kPa | ChemSep v8.3 pure component data Compiled value |
| Pc | 3530.00 | kPa | KDB |
| Pc | 3530.00 ± 30.00 | kPa | NISTTsonopoulos and Ambrose, 1996 |
| Ptriple | 1.45e-08 | kPa | ChemSep v8.3 pure component data Compiled value |
| ρc | [230.04; 239.30] | kg/m3 |
|
| ρc | 239.30 | kg/m3 | Vapor Pressures and Vapor Liquid Critical Properties of Four Pentene Isomers |
| ρc | 230.04 ± 2.10 | kg/m3 | NISTTsonopoulos and Ambrose, 1996 |
| Inp | [444.00; 475.11] |
|
|
| Inp | 457.10 | NIST Soják, Addová, et al., 2002 | |
| He; Column length: 150. m; Column diameter: 0.250 mm | |||
| Inp | 450.10 | NIST Soják, Addová, et al., 2002 | |
| He; Column length: 93. m; Column diameter: 0.250 mm | |||
| Inp | 450.00 | NIST Papazova, Milina, et al., 1988 | |
| Column length: 50. m; Column diameter: 0.25 mm | |||
| Inp | 457.00 | NIST Lubeck and Sutton, 1984 | |
| 60. m/0.264 mm/0.25 «mu»m, H2 | |||
| Inp | 457.00 | NIST Lubeck and Sutton, 1984 | |
| 50. m/0.21 mm/0.5 «mu»m, H2 | |||
| Inp | 450.00 | NIST Nijs and Jacobs, 1981 | |
| He; Column length: 150. m; Column diameter: 0.50 mm | |||
| Inp | 450.60 | NIST Bajus, Veselý, et al., 1979 | |
| Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 450.20 | NIST Bajus, Veselý, et al., 1979 | |
| Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 450.70 | NIST Bajus, Veselý, et al., 1979, 2 | |
| Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 449.80 | NIST Bajus, Veselý, et al., 1979, 2 | |
| Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | Outlier 475.11 | NIST Pacáková and Koslík, 1978 | |
| 50. m/0.2 mm/0.5 «mu»m, N2 | |||
| Inp | 451.00 | NISTChrétien and Dubois, 1977 | |
| Inp | 450.00 | NISTChretien and Dubois, 1976 | |
| Inp | Outlier 471.10 | NIST Lulova, Leont'eva, et al., 1976 | |
| He; Column length: 120. m; Column diameter: 0.25 mm | |||
| Inp | 450.00 | NIST Rijks and Cramers, 1974 | |
| N2; Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 451.00 | NIST Rijks and Cramers, 1974 | |
| N2; Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | 449.45 | NIST Schomburg and Dielmann, 1973 | |
| Column length: 100. m; Column diameter: 0.25 mm | |||
| Inp | Outlier 472.00 | NIST Matukuma, 1969 | |
| N2; Column length: 91.4 m; Column diameter: 0.25 mm | |||
| Inp | 449.00 | NIST Hively and Hinton, 1968 | |
| He, Chromosorb P; Column length: 15. m; Column diameter: 0.25 mm | |||
| Inp | 450.00 | NIST Hively and Hinton, 1968 | |
| He, Chromosorb P; Column length: 15. m; Column diameter: 0.25 mm | |||
| Inp | 452.00 | NIST Hively and Hinton, 1968 | |
| He, Chromosorb P; Column length: 15. m; Column diameter: 0.25 mm | |||
| Inp | 452.00 | NIST Hively and Hinton, 1968 | |
| He, Chromosorb P; Column length: 15. m; Column diameter: 0.25 mm | |||
| Inp | 460.00 | NIST Widmer, 1967 | |
| Diatoport S; Column length: 7.9 m | |||
| Inp | 454.00 | NIST Zulaïca and Guiochon, 1966 | |
| Column length: 10. m | |||
| Inp | 448.00 | NIST Wehrli and Kováts, 1959 | |
| Celite; Column length: 2.25 m | |||
| Inp | 450.00 | NIST Wehrli and Kováts, 1959 | |
| Celite; Column length: 2.25 m | |||
| Inp | 461.20 | NIST Haagen-Smit Laboratory, 1997 | |
| He; Column length: 100. m; Column diameter: 0.2 mm; Program: 5C(10min) => 5C/min => 50C(48min) => 1.5C/min => 195C(91min) | |||
| Inp | 462.00 | NIST Hoekman, 1993 | |
| 60. m/0.32 mm/1.0 «mu»m, He; Program: -40 C for 12 min; -40 - 125 C at 3 deg.min; 125-185 C at 6 deg/min; 185 - 220 C at 20 deg/min; hold 220 C for 2 min | |||
| Inp | 451.10 | NIST Soják, Addová, et al., 2002 | |
| He, 1. K/min; Column length: 150. m; Column diameter: 0.250 mm; Tstart: 30. C; Tend: 200. C | |||
| Inp | 445.14 | NIST White, Douglas, et al., 1992 | |
| 100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C | |||
| Inp | 445.18 | NIST White, Douglas, et al., 1992 | |
| 100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C | |||
| Inp | 445.00 | NIST White, Hackett, et al., 1992 | |
| 100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C | |||
| Inp | 449.90 | NIST Sojak, Addova, et al., 2000 | |
| He; Column length: 93. m; Column diameter: 0.25 mm | |||
| Inp | 450.00 | NIST N/A | |
| N2; Column length: 74.6 m; Column diameter: 0.28 mm | |||
| Inp | 449.00 | NISTSchomburg, 1966 | |
| Inp | Outlier 473.00 | NIST Huguet, 1961 | |
| Nitrogen, Celite C-22; Column length: 2.5 m | |||
| Inp | 453.00 | NIST Bramston-Cook, 2013 | |
| 60. m/0.25 mm/1.0 «mu»m, Helium, 45. C @ 1.45 min, 3.6 K/min, 210. C @ 2.72 min | |||
| Inp | 458.00 | NIST Supelco, 2012 | |
| 100. m/0.25 mm/0.50 «mu»m, Helium, 20. C @ 15. min, 15. K/min, 220. C @ 30. min | |||
| Inp | 445.00 | NIST Zhang, Ding, et al., 2009 | |
| 50. m/0.20 mm/0.50 «mu»m, Nitrogen, 35. C @ 15. min, 2. K/min, 200. C @ 10. min | |||
| Inp | 457.00 | NIST Chupalov and Zenkevich, 1996 | |
| N2, 3. K/min; Column length: 52. m; Column diameter: 0.26 mm; Tstart: 50. C; Tend: 220. C | |||
| Inp | 444.00 | NIST Guan, Li, et al., 1995 | |
| 60. C @ 2. min, 4. K/min; Column length: 50. m; Column diameter: 0.32 mm; Tend: 200. C | |||
| Inp | 450.00 | NIST Ramnas, Ostermark, et al., 1994 | |
| 50. m/0.32 mm/1.0 «mu»m, He, 2. K/min; Tstart: -20. C | |||
| Inp | 452.00 | NIST Chen and Feng, 2007 | |
| Program: not specified | |||
| Inp | 451.00 | NIST Junkes, Castanho, et al., 2003 | |
| Program: not specified | |||
| Inp | 461.00 | NIST Perkin Elmer Instruments, 2002 | |
| Column length: 100. m; Phase thickness: 0.50 «mu»m; Program: not specified | |||
| Inp | 455.00 | NIST Zenkevich, 2000 | |
| Program: not specified | |||
| Inp | 453.00 | NIST Spieksma, 1999 | |
| Program: not specified | |||
| Inp | 457.00 | NIST Zenkevich, 1996 | |
| Program: not specified | |||
| Inp | 457.00 | NIST Robinson and Odell, 1971 | |
| N2, Chromosorb W; Column length: 6.1 m; Program: 50C910min) => 20C/min => 90(6min) => 10C/min => 150C(hold) | |||
| Inp | 459.00 | NIST Robinson and Odell, 1971 | |
| N2, Embacel; Column length: 3.0 m; Program: 25C(5min) => 2C/min => 35 => 4C/min => 95C(hold) | |||
| Inp | 457.10 | NISTMSDC-RI | |
| Inp | 450.00 | NISTMSDC-RI | |
| Inp | Outlier 475.11 | NISTMSDC-RI | |
| Inp | 451.00 | NISTMSDC-RI | |
| Inp | 452.00 | NISTMSDC-RI | |
| Inp | 449.90 | NISTMSDC-RI | |
| Inp | 457.00 | NISTMSDC-RI | |
| Inp | 451.10 | NISTMSDC-RI | |
| Ip | [487.00; 490.00] |
|
|
| Ip | 490.00 | NIST Widmer, 1967 | |
| Diatoport P; Column length: 7.9 m | |||
| Ip | 487.00 | NIST Widmer, 1967 | |
| Diatoport P; Column length: 7.9 m | |||
| Ip | 490.00 | NISTMSDC-RI | |
| S°liquid | [253.30; 253.50] | J/mol×K |
|
| S°liquid | 253.50 | J/mol×K | NISTChao, Hall, et al., 1983 |
| S°liquid | 253.30 | J/mol×K | NISTTodd, Oliver, et al., 1947 |
| Tboil | [291.95; 294.65] | K |
|
| Tboil | 293.21 | K | ChemSep v8.3 pure component data Compiled value |
| Tboil | 293.30 | K | KDB |
| Tboil | 293.00 | K | NISTFarchan Laboratories, 1990 |
| Tboil | 293.30 | K | NISTWeast and Grasselli, 1989 |
| Tboil | 294.00 ± 3.00 | K | NISTSchulte-Elte, Gadola, et al., 1971 |
| Tboil | 293.30 ± 0.60 | K | NISTEidus, Nuzitskii, et al., 1970 |
| Tboil | 293.40 ± 1.00 | K | NISTGorin, Galkina, et al., 1966 |
| Tboil | 293.20 ± 0.50 | K | NISTKaal. T.A., Ordyan, et al., 1965 |
| Tboil | 293.20 ± 0.50 | K | NISTEidus, Puzitskii, et al., 1960 |
| Tboil | Outlier 291.95 ± 0.60 | K | NISTThornton and Herald, 1948 |
| Tboil | Outlier 294.65 ± 3.00 | K | NISTTyazhelova, 1948 |
| Tboil | 293.17 ± 0.20 | K | NISTAnonymous, 1947 |
| Tboil | 293.17 ± 0.20 | K | NISTBoord, Greenlee, et al., 1946 |
| Tboil | 293.15 ± 0.50 | K | NISTGerding and van der Vet, 1946 |
| Tboil | 292.65 ± 0.55 | K | NISTMorrell, Paltz, et al., 1946 |
| Tboil | 293.25 ± 0.60 | K | NISTRoy, 1946 |
| Tboil | 293.25 ± 0.30 | K | NISTEwell and Hardy, 1941 |
| Tboil | 293.34 ± 0.40 | K | NISTDolliver, Gresham, et al., 1937 |
| Tboil | 293.35 ± 0.20 | K | NISTCarr and Walter, 1936 |
| Tboil | 293.40 ± 0.60 | K | NISTGredy, 1935 |
| Tboil | 293.40 ± 0.50 | K | NISTDavis, Thomson, et al., 1932 |
| Tboil | 294.20 ± 1.50 | K | NISTHyman and Wagner, 1930 |
| Tboil | 294.20 ± 1.50 | K | NISTNorris and Joubert, 1927 |
| Tboil | 293.25 ± 0.20 | K | NISTNorris and Reuter, 1927 |
| Tboil | 293.65 ± 0.50 | K | NISTLagerlof, 1918 |
| Tc | [450.00; 452.70] | K |
|
| Tc | 451.38 | K | Vapor Pressures and Vapor Liquid Critical Properties of Four Pentene Isomers |
| Tc | 452.70 | K | IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 6 Compiled value |
| Tc | 450.00 | K | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value |
| Tc | 450.37 | K | Passut and Danner (1973), critical constants and acentric factors Compiled value |
| Tc | 452.70 | K | ChemSep v8.3 pure component data Compiled value |
| Tc | 452.70 | K | KDB |
| Tc | 452.70 ± 0.30 | K | NISTTsonopoulos and Ambrose, 1996 |
| Tfus | [104.60; 104.90] | K |
|
| Tfus | 104.90 | K | Jean-Claude Bradley Open Melting Point Dataset (2014, CC0) Compiled value |
| Tfus | 104.66 | K | ChemSep v8.3 pure component data Compiled value |
| Tfus | 104.70 | K | KDB |
| Tfus | 104.90 | K | Aq. Solubility Prediction |
| Tfus | 104.64 ± 0.06 | K | NISTAnonymous, 1953 |
| Tfus | 104.65 ± 0.03 | K | NISTAnonymous, 1953 |
| Tfus | 104.70 ± 0.20 | K | NISTBoord, Greenlee, et al., 1946 |
| Tfus | 104.60 ± 0.06 | K | NISTStreiff, Murphy, et al., 1946 |
| Tfus | 104.61 ± 0.05 | K | NISTStreiff, Murphy, et al., 1946 |
| Tfus | 104.65 ± 0.04 | K | NISTStreiff, Murphy, et al., 1946 |
| Ttriple | [104.66; 104.73] | K |
|
| Ttriple | 104.73 | K | Staveley, Lobo and Calado (1981), triple points Compiled value |
| Ttriple | Outlier 104.66 | K | ChemSep v8.3 pure component data Compiled value |
| Ttriple | 104.71 ± 0.02 | K | NISTChao, Hall, et al., 1983, 2 |
| Ttriple | 104.72 ± 0.02 | K | NISTTodd, Oliver, et al., 1947, 2 |
| Ttriple | 104.71 ± 0.05 | K | NISTHuffman, 1946 |
| Ttriple | 104.71 ± 0.02 | K | NISTChao, Hall, et al., 1983 |
| Ttriple | 104.72 ± 0.02 | K | NISTTodd, Oliver, et al., 1947 |
| UQi | 3.10 | ChemSep v8.3 pure component data Compiled value | |
| URi | 3.59 | ChemSep v8.3 pure component data Compiled value | |
| Vc | [0.305; 0.305] | m3/kmol |
|
| Vc | 0.305 | m3/kmol | IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 6 Compiled value |
| Vc | Outlier 0.305 | m3/kmol | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value |
| Vc | 0.305 | m3/kmol | ChemSep v8.3 pure component data Compiled value |
| Vc | 0.305 | m3/kmol | KDB |
| Vc | 0.305 | m3/kmol | NISTTsonopoulos and Ambrose, 1996 |
| VCOSTALD | 0.29 | m3/kmol | Hankinson and Thomson (1979), COSTALD parameters Compiled value |
| ωSRK | 0.23 | Hankinson and Thomson (1979), COSTALD parameters Compiled value | |
| Zc | [0.2859470; 0.2880000] |
|
|
| Zc | 0.2860000 | IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 6 Compiled value | |
| Zc | 0.2880000 | ChemSep v8.3 pure component data Compiled value | |
| Zc | 0.2859470 | KDB | |
| Zra | [0.27; 0.27] |
|
|
| Zra | 0.27 | Hankinson and Thomson (1979), COSTALD parameters Compiled value | |
| Zra | 0.27 | ChemSep v8.3 pure component data Compiled value | |
| Zra | 0.27 | KDB | |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| Cp,gas | [94.71; 290.50] | J/mol×K | [200.00; 1500.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is Cp,gas in J/mol×K, T in K | |||
| Coefficient A | 8.25570e+01 | |||
| Coefficient B | -6.71080e+02 | |||
| Coefficient C | 5.87624e+00 | |||
| Coefficient D | -1.24580e-04 | |||
| Coefficient E | 4.23400e-08 | |||
| Temperature range, min. | 200.00 | |||
| Temperature range, max. | 1500.00 | |||
| Cp,gas | 94.71 | J/mol×K | 200.00 | Calculated Property |
| Cp,gas | 131.47 | J/mol×K | 344.44 | Calculated Property |
| Cp,gas | 168.42 | J/mol×K | 488.89 | Calculated Property |
| Cp,gas | 198.69 | J/mol×K | 633.33 | Calculated Property |
| Cp,gas | 222.63 | J/mol×K | 777.78 | Calculated Property |
| Cp,gas | 241.68 | J/mol×K | 922.22 | Calculated Property |
| Cp,gas | 257.14 | J/mol×K | 1066.67 | Calculated Property |
| Cp,gas | 269.98 | J/mol×K | 1211.11 | Calculated Property |
| Cp,gas | 280.92 | J/mol×K | 1355.56 | Calculated Property |
| Cp,gas | 290.50 | J/mol×K | 1500.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| Cp,liquid | [121.67; 156.67] | J/mol×K | [103.08; 300.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is Cp,liquid in J/mol×K, T in K | |||
| Coefficient A | 9.49960e+01 | |||
| Coefficient B | 9.24220e+01 | |||
| Coefficient C | 1.49834e+00 | |||
| Coefficient D | 9.09300e-03 | |||
| Coefficient E | -4.58260e-06 | |||
| Temperature range, min. | 103.08 | |||
| Temperature range, max. | 300.00 | |||
| Cp,liquid | 121.67 | J/mol×K | 103.08 | Calculated Property |
| Cp,liquid | 122.18 | J/mol×K | 124.96 | Calculated Property |
| Cp,liquid | 123.91 | J/mol×K | 146.84 | Calculated Property |
| Cp,liquid | 126.49 | J/mol×K | 168.72 | Calculated Property |
| Cp,liquid | 129.81 | J/mol×K | 190.60 | Calculated Property |
| Cp,liquid | 133.80 | J/mol×K | 212.48 | Calculated Property |
| Cp,liquid | 138.46 | J/mol×K | 234.36 | Calculated Property |
| Cp,liquid | 143.82 | J/mol×K | 256.24 | Calculated Property |
| Cp,liquid | 149.88 | J/mol×K | 278.12 | Calculated Property |
| Cp,liquid | 156.67 | J/mol×K | 300.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| η | [0.0330285; 0.0001164] | Pa×s | [104.66; 373.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = exp(A + B/T + C·ln(T) + D·T^E) Y is η in Pa×s, T in K | |||
| Coefficient A | -1.12140e+01 | |||
| Coefficient B | 8.21550e+02 | |||
| Coefficient C | -1.01330e-02 | |||
| Coefficient D | 9.46730e-08 | |||
| Coefficient E | 2.00000e+00 | |||
| Temperature range, min. | 104.66 | |||
| Temperature range, max. | 373.00 | |||
| η | 0.0330285 | Pa×s | 104.66 | Calculated Property |
| η | 0.0057840 | Pa×s | 134.48 | Calculated Property |
| η | 0.0019064 | Pa×s | 164.29 | Calculated Property |
| η | 0.0008837 | Pa×s | 194.11 | Calculated Property |
| η | 0.0005029 | Pa×s | 223.92 | Calculated Property |
| η | 0.0003268 | Pa×s | 253.74 | Calculated Property |
| η | 0.0002326 | Pa×s | 283.55 | Calculated Property |
| η | 0.0001767 | Pa×s | 313.37 | Calculated Property |
| η | 0.0001408 | Pa×s | 343.18 | Calculated Property |
| η | 0.0001164 | Pa×s | 373.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| ΔvapH | [33.69; 10.44] | kJ/mol | [104.66; 434.38] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc Y is ΔvapH in kJ/mol, T in K | |||
| Coefficient A | 3.91740e+01 | |||
| Coefficient B | 5.80940e-01 | |||
| Coefficient C | 1.25790e-01 | |||
| Coefficient D | -7.87850e-01 | |||
| Coefficient E | 4.93540e-01 | |||
| Critical temperature, Tc (K) | 4.52700e+02 | |||
| Temperature range, min. | 104.66 | |||
| Temperature range, max. | 434.38 | |||
| ΔvapH | 33.69 | kJ/mol | 104.66 | Calculated Property |
| ΔvapH | 31.79 | kJ/mol | 141.30 | Calculated Property |
| ΔvapH | 29.94 | kJ/mol | 177.93 | Calculated Property |
| ΔvapH | 28.12 | kJ/mol | 214.57 | Calculated Property |
| ΔvapH | 26.29 | kJ/mol | 251.20 | Calculated Property |
| ΔvapH | 24.39 | kJ/mol | 287.84 | Calculated Property |
| ΔvapH | 22.26 | kJ/mol | 324.47 | Calculated Property |
| ΔvapH | 19.69 | kJ/mol | 361.11 | Calculated Property |
| ΔvapH | 16.22 | kJ/mol | 397.74 | Calculated Property |
| ΔvapH | 10.44 | kJ/mol | 434.38 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| Pvap | [1.33; 202.64] | kPa | [209.84; 314.08] |
The Yaws Handbook of Vapor Pressure
|
| Equation | ln(Y) = A + B/(T + C) Y is Pvap in kPa, T in K | |||
| Coefficient A | 1.42164e+01 | |||
| Coefficient B | -2.57363e+03 | |||
| Coefficient C | -2.50700e+01 | |||
| Temperature range, min. | 209.84 | |||
| Temperature range, max. | 314.08 | |||
| Pvap | 1.33 | kPa | 209.84 | Calculated Property |
| Pvap | 3.03 | kPa | 221.42 | Calculated Property |
| Pvap | 6.29 | kPa | 233.00 | Calculated Property |
| Pvap | 12.09 | kPa | 244.59 | Calculated Property |
| Pvap | 21.76 | kPa | 256.17 | Calculated Property |
| Pvap | 37.02 | kPa | 267.75 | Calculated Property |
| Pvap | 60.01 | kPa | 279.33 | Calculated Property |
| Pvap | 93.27 | kPa | 290.92 | Calculated Property |
| Pvap | 139.72 | kPa | 302.50 | Calculated Property |
| Pvap | 202.64 | kPa | 314.08 | Calculated Property |
| Pvap | [1.45e-08; 3527.00] | kPa | [104.66; 452.70] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = exp(A + B/T + C·ln(T) + D·T^E) Y is Pvap in kPa, T in K | |||
| Coefficient A | 6.77539e+01 | |||
| Coefficient B | -4.95626e+03 | |||
| Coefficient C | -8.29005e+00 | |||
| Coefficient D | 1.00425e-05 | |||
| Coefficient E | 2.00000e+00 | |||
| Temperature range, min. | 104.66 | |||
| Temperature range, max. | 452.70 | |||
| Pvap | 1.45e-08 | kPa | 104.66 | Calculated Property |
| Pvap | 4.18e-04 | kPa | 143.33 | Calculated Property |
| Pvap | 0.10 | kPa | 182.00 | Calculated Property |
| Pvap | 2.84 | kPa | 220.67 | Calculated Property |
| Pvap | 25.57 | kPa | 259.34 | Calculated Property |
| Pvap | 119.74 | kPa | 298.02 | Calculated Property |
| Pvap | 376.36 | kPa | 336.69 | Calculated Property |
| Pvap | 918.10 | kPa | 375.36 | Calculated Property |
| Pvap | 1899.36 | kPa | 414.03 | Calculated Property |
| Pvap | 3527.00 | kPa | 452.70 | Calculated Property |
| Pvap | [1.34e-08; 3445.41] | kPa | [104.66; 450.37] |
KDB Vapor Pressure Data
|
| Equation | ln(Y) = A + B/T + C·ln(T) + D·T² + E/T² Y is Pvap in kPa, T in K | |||
| Coefficient A | 7.12332e+01 | |||
| Coefficient B | -5.04579e+03 | |||
| Coefficient C | -8.87493e+00 | |||
| Coefficient D | 1.15451e-05 | |||
| Coefficient E | 0.00000e+00 | |||
| Temperature range, min. | 104.66 | |||
| Temperature range, max. | 450.37 | |||
| Pvap | 1.34e-08 | kPa | 104.66 | Calculated Property |
| Pvap | 3.91e-04 | kPa | 143.07 | Calculated Property |
| Pvap | 0.10 | kPa | 181.48 | Calculated Property |
| Pvap | 2.67 | kPa | 219.90 | Calculated Property |
| Pvap | 23.97 | kPa | 258.31 | Calculated Property |
| Pvap | 112.32 | kPa | 296.72 | Calculated Property |
| Pvap | 354.33 | kPa | 335.13 | Calculated Property |
| Pvap | 871.07 | kPa | 373.55 | Calculated Property |
| Pvap | 1824.21 | kPa | 411.96 | Calculated Property |
| Pvap | 3445.41 | kPa | 450.37 | Calculated Property |
| Pvap | [47.37; 270.11] | kPa | [273.37; 324.29] |
NIST
|
| Equation | ln(Y) = A + B/(T + C) Y is Pvap in kPa, T in K | |||
| Coefficient A | 1.37033e+01 | |||
| Coefficient B | -2.33384e+03 | |||
| Coefficient C | -3.63200e+01 | |||
| Reference | Scott and Waddington, 1950 | |||
| Comment | Coefficents calculated by NIST from author's data. | |||
| Temperature range, min. | 273.37 | |||
| Temperature range, max. | 324.29 | |||
| Pvap | 47.37 | kPa | 273.37 | Calculated Property |
| Pvap | 59.59 | kPa | 279.03 | Calculated Property |
| Pvap | 74.18 | kPa | 284.69 | Calculated Property |
| Pvap | 91.45 | kPa | 290.34 | Calculated Property |
| Pvap | 111.71 | kPa | 296.00 | Calculated Property |
| Pvap | 135.31 | kPa | 301.66 | Calculated Property |
| Pvap | 162.59 | kPa | 307.32 | Calculated Property |
| Pvap | 193.90 | kPa | 312.97 | Calculated Property |
| Pvap | 229.61 | kPa | 318.63 | Calculated Property |
| Pvap | 270.11 | kPa | 324.29 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| ρl | [798.07; 399.46] | kg/m3 | [104.66; 434.38] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A / B^(1 + (1 − T/C)^D) Y is ρl in kg/m3, T in K | |||
| Coefficient A | 6.02919e+01 | |||
| Coefficient B | 2.62290e-01 | |||
| Coefficient C | 4.52700e+02 | |||
| Coefficient D | 2.75790e-01 | |||
| Temperature range, min. | 104.66 | |||
| Temperature range, max. | 434.38 | |||
| ρl | 798.07 | kg/m3 | 104.66 | Calculated Property |
| ρl | 768.62 | kg/m3 | 141.30 | Calculated Property |
| ρl | 737.78 | kg/m3 | 177.93 | Calculated Property |
| ρl | 705.23 | kg/m3 | 214.57 | Calculated Property |
| ρl | 670.51 | kg/m3 | 251.20 | Calculated Property |
| ρl | 632.96 | kg/m3 | 287.84 | Calculated Property |
| ρl | 591.45 | kg/m3 | 324.47 | Calculated Property |
| ρl | 543.93 | kg/m3 | 361.11 | Calculated Property |
| ρl | 485.73 | kg/m3 | 397.74 | Calculated Property |
| ρl | 399.46 | kg/m3 | 434.38 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| γ | [0.03; 0.01] | N/m | [105.15; 293.15] |
Jasper (1972), surface tension of pure liquid compounds Compiled value
|
| Equation | Y = A + B·T + C·T² + D·T³ + E·T⁴ Y is γ in N/m, T in K | |||
| Coefficient A | 4.45818e-02 | |||
| Coefficient B | -1.03100e-04 | |||
| Coefficient C | 0.00000e+00 | |||
| Coefficient D | 0.00000e+00 | |||
| Coefficient E | 0.00000e+00 | |||
| Temperature range, min. | 105.15 | |||
| Temperature range, max. | 293.15 | |||
| γ | 0.03 | N/m | 105.15 | Calculated Property |
| γ | 0.03 | N/m | 126.04 | Calculated Property |
| γ | 0.03 | N/m | 146.93 | Calculated Property |
| γ | 0.03 | N/m | 167.82 | Calculated Property |
| γ | 0.03 | N/m | 188.71 | Calculated Property |
| γ | 0.02 | N/m | 209.59 | Calculated Property |
| γ | 0.02 | N/m | 230.48 | Calculated Property |
| γ | 0.02 | N/m | 251.37 | Calculated Property |
| γ | 0.02 | N/m | 272.26 | Calculated Property |
| γ | 0.01 | N/m | 293.15 | Calculated Property |
| γ | [0.04; 0.00] | N/m | [104.66; 434.38] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is γ in N/m, T in K | |||
| Coefficient A | -1.58500e-02 | |||
| Coefficient B | 5.84690e+00 | |||
| Coefficient C | -2.84910e+00 | |||
| Coefficient D | -1.09340e-03 | |||
| Coefficient E | -4.09030e-06 | |||
| Temperature range, min. | 104.66 | |||
| Temperature range, max. | 434.38 | |||
| γ | 0.04 | N/m | 104.66 | Calculated Property |
| γ | 0.03 | N/m | 141.30 | Calculated Property |
| γ | 0.03 | N/m | 177.93 | Calculated Property |
| γ | 0.02 | N/m | 214.57 | Calculated Property |
| γ | 0.02 | N/m | 251.20 | Calculated Property |
| γ | 0.01 | N/m | 287.84 | Calculated Property |
| γ | 0.01 | N/m | 324.47 | Calculated Property |
| γ | 0.01 | N/m | 361.11 | Calculated Property |
| γ | 0.00 | N/m | 397.74 | Calculated Property |
| γ | 0.00 | N/m | 434.38 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| λgas | [0.00; 0.10] | W/m×K | [104.66; 1000.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A·T^B / (1 + C/T + D/T²) Y is λgas in W/m×K, T in K | |||
| Coefficient A | 1.48160e-04 | |||
| Coefficient B | 9.73750e-01 | |||
| Coefficient C | 7.52810e+01 | |||
| Coefficient D | 1.16540e+05 | |||
| Temperature range, min. | 104.66 | |||
| Temperature range, max. | 1000.00 | |||
| λgas | 0.00 | W/m×K | 104.66 | Calculated Property |
| λgas | 0.01 | W/m×K | 204.14 | Calculated Property |
| λgas | 0.02 | W/m×K | 303.62 | Calculated Property |
| λgas | 0.03 | W/m×K | 403.11 | Calculated Property |
| λgas | 0.04 | W/m×K | 502.59 | Calculated Property |
| λgas | 0.05 | W/m×K | 602.07 | Calculated Property |
| λgas | 0.07 | W/m×K | 701.55 | Calculated Property |
| λgas | 0.08 | W/m×K | 801.04 | Calculated Property |
| λgas | 0.09 | W/m×K | 900.52 | Calculated Property |
| λgas | 0.10 | W/m×K | 1000.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| λliquid | [0.16; 0.11] | W/m×K | [104.66; 293.20] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is λliquid in W/m×K, T in K | |||
| Coefficient A | -1.76220e-02 | |||
| Coefficient B | 5.92090e+00 | |||
| Coefficient C | -1.69400e+00 | |||
| Coefficient D | -4.54050e-04 | |||
| Coefficient E | -3.35640e-06 | |||
| Temperature range, min. | 104.66 | |||
| Temperature range, max. | 293.20 | |||
| λliquid | 0.16 | W/m×K | 104.66 | Calculated Property |
| λliquid | 0.15 | W/m×K | 125.61 | Calculated Property |
| λliquid | 0.15 | W/m×K | 146.56 | Calculated Property |
| λliquid | 0.14 | W/m×K | 167.51 | Calculated Property |
| λliquid | 0.14 | W/m×K | 188.46 | Calculated Property |
| λliquid | 0.13 | W/m×K | 209.40 | Calculated Property |
| λliquid | 0.12 | W/m×K | 230.35 | Calculated Property |
| λliquid | 0.12 | W/m×K | 251.30 | Calculated Property |
| λliquid | 0.11 | W/m×K | 272.25 | Calculated Property |
| λliquid | 0.11 | W/m×K | 293.20 | Calculated Property |
Find more compounds similar to 1-Butene, 3-methyl-.
Note: Cheméo is only indexing the data, follow the source links to retrieve the latest data. The source is also providing more information like the publication year, authors and more.
Take the time to validate and double check the source of the data.
Outlier This icon means
that the value is more than 2 standard deviations away from the
property mean.
Calculated This icon marks a calculated value or equation: a prediction, not a measurement.
Compiled This icon marks a compiled value or equation: taken from a data compilation such as ChemSep, not from an original measurement report.
These property values are available through the Cheméo API. A free account gives you an access key.