Cheméo RefData: 1-Octanol (CAS 111-87-5)

1-Octanol, 2D structure

Cheméo RefData 1.0

One consistent value set for simulation, built from chemeo v31.

Formula
C8H18O
CAS
111-87-5
Molecular Weight
130.23 g/mol
SMILES
CCCCCCCCO
InChI Key
KBPLFHHGFOOTCA-UHFFFAOYSA-N
Cheméo is a service of Céondo GmbH, since 2007, we provide simulation, modelling and software development services for the industry. Do not hesitate to contact us for your projects.

Constants

PropertyValueUnitu95BasisSources
MW
Molecular Weight
130.23 g/mol derived
Tc
Critical Temperature
652.40 K 0.94 experimental KDB; NIST Webbook
Pc
Critical Pressure
2777.00 kPa 143.19 experimental KDB; NIST Webbook
ω
Acentric Factor
0.5772 derived
Tboil
Normal Boiling Point Temperature
468.00 K 1.25 experimental KDB; NIST Webbook; NCMS SOLV-DB; literature: 1, 2, 3, 4
Tfus
Normal melting (fusion) point
258.03 K 1.82 experimental KDB; Aqueous Solubility Prediction Method; NIST Webbook; NCMS SOLV-DB; literature: 5, 6, 7, 8, 9, 10
ΔfH°gas
Enthalpy of formation at standard conditions
-355.60 kJ/mol 6.31 experimental KDB; NIST Webbook

Equations

PropertyEquationTemperature (K)Fit
Pvap
Vapor pressure
Y = exp(A + B/T + C·ln(T) + D·T^E)
Y in kPa, T in K
[318.15; 652.40] experimental, 258 points, AARD 2.4% against the measurements
A = 2.49988e+02, B = -1.85060e+04, C = -3.40714e+01, D = 1.67098e-05, E = 2.00000e+00
Cp,gas
Ideal gas heat capacity
Y = A + B·((C/T)/sinh(C/T))² + D·((E/T)/cosh(E/T))²
Y in J/mol×K, T in K
[298.15; 1500.00] compiled, 20 points, AARD 0.0% against its inputs, published equations only: agreement with those equations, not with measurements
ChemSep v8.3 pure component data
A = 1.38050e+02, B = 4.45900e+02, C = 1.57510e+03, D = 3.20160e+02, E = 7.18800e+02
Cp,liquid
Liquid phase heat capacity
Y = A + B·T + C·T² + D·T³ + E·T⁴
Y in J/mol×K, T in K
[286.00; 333.15] experimental, 21 points, AARD 1.5% against the measurements
A = -3.19883e+04, B = 3.09209e+02, C = -9.88454e-01, D = 1.05548e-03, E = 0.00000e+00
ΔvapH
Enthalpy of vaporization at a given temperature
Y = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc
Y in kJ/mol, T in K
[257.65; 631.53] derived, 28 points, AARD 0.4% against its inputs
ChemSep v8.3 pure component data
A = 7.28336e+01, B = -1.23254e+00, C = 3.66233e+00, D = -2.06151e+00, E = 0.00000e+00, Tc = 6.52400e+02 K
ρl
Liquid Density
Y = A / B^(1 + (1 − T/C)^D)
Y in kg/m3, T in K
[257.65; 652.30] compiled, 236 points, AARD 0.1% against its inputs, published equations only: agreement with those equations, not with measurements
ChemSep v8.3 pure component data
A = 4.12082e+01, B = 2.02514e-01, C = 6.52400e+02, D = 2.20000e-01
λliquid
Liquid thermal conductivity
Y = A + B·T + C·T² + D·T³ + E·T⁴
Y in W/m×K, T in K
[257.65; 570.15] compiled, 20 points, AARD 0.0% against its inputs, published equations only: agreement with those equations, not with measurements
ChemSep v8.3 pure component data
A = 2.35280e-01, B = -2.50000e-04, C = 3.63635e-20, D = -2.72897e-23, E = 0.00000e+00
λgas
Gas thermal conductivity
Y = A·T^B / (1 + C/T + D/T²)
Y in W/m×K, T in K
[468.35; 1000.00] compiled, 20 points, AARD 0.1% against its inputs, published equations only: agreement with those equations, not with measurements
ChemSep v8.3 pure component data
A = 1.66037e-07, B = 1.93034e+00, C = 0.00000e+00, D = 0.00000e+00

Equation of state

ModelTc (K)Pc (kPa)ωc1c2c3Volume shift (m³/kmol)Pvap AARD
PR 652.40 2777.00 0.5772 1.14113e+00 -2.35662e-01 3.29739e+00 3.35084e-03 0.7%
SRK 652.40 2777.00 0.5772 1.33641e+00 -6.40537e-01 3.91070e+00 2.83560e-02 0.8%

a(T) = Ωa·R²·Tc²/Pc·α(T) and b = Ωb·R·Tc/Pc, with Pc in Pa and R = 8.314462618 J/(mol·K); PR: Ωa = 0.45724, Ωb = 0.07780; SRK: Ωa = 0.42748, Ωb = 0.08664.

Mathias-Copeman alpha function, with Tr = T/Tc:
α(T) = [1 + c1·(1 − √Tr) + c2·(1 − √Tr)² + c3·(1 − √Tr)³]² for T ≤ Tc,
α(T) = [1 + c1·(1 − √Tr)]² above Tc.

Péneloux volume shift: v = vEOS − volume shift, fitted to the liquid density at 0.7·Tc (0 when there is no liquid density).

A binary interaction parameter is valid only with these parameters, from RefData 1.0.

Binary interaction parameters

PartnerModelkijGradeFitMixture data
Carbon dioxide PR 0.1115 B 30 points from 1 dataset, 303.15 to 333.15 K, 799.0 to 8437.0 kPa; AARD 5.2%, 46.4% at kij = 0; a constant kij describes this system poorly, prefer an activity model 21-009-j
Carbon dioxide SRK 0.1157 B 32 points from 1 dataset, 303.15 to 333.15 K, 799.0 to 9302.0 kPa; AARD 5.2%, 45.7% at kij = 0; a constant kij describes this system poorly, prefer an activity model 21-009-j
Cyclohexane PR 0.1835 A 9 points from 1 dataset, 354.10 to 354.90 K, at 101.3 kPa; AARD 0.1%, 1.7% at kij = 0 12-997-c
Cyclohexane SRK 0.1881 A 9 points from 1 dataset, 354.10 to 354.90 K, at 101.3 kPa; AARD 0.1%, 1.7% at kij = 0 12-997-c
Hexane PR 0.2438 A 14 points from 1 dataset, 342.20 to 342.60 K, at 101.3 kPa; AARD 0.2%, 2.1% at kij = 0 12-680-d
Hexane SRK 0.2516 A 14 points from 1 dataset, 342.20 to 342.60 K, at 101.3 kPa; AARD 0.2%, 2.2% at kij = 0 12-680-d

Grade A: the kij reproduces the measured pressures within 5% on average (AARD), B within 15%. A grade says how well one constant kij reproduces the measured points in its temperature and pressure range, nothing more: a pair that splits into two liquids is not described by it.

Not in RefData for this compound

Critical Volume, Critical Compressibility, Standard Gibbs free energy of formation, Rackett Parameter, Dynamic viscosity, Surface Tension.

Literature

  1. Ternary phase diagrams for aqueous mixtures of butyric acid with several solvents: experimental and correlated data
    M. Lalikoglu, M. Bilgin
    10.1016/j.fluid.2014.03.008, Vol. 371 (2014)
  2. The role of organic diluents in the aspects of equilibrium, kinetics and thermodynamic model for silver ion extraction using an extractant D2EHPA
    T. Wongsawa, N. Sunsandee, A. W. Lothongkum, U. Pancharoen, S. Phatanasri
    10.1016/j.fluid.2014.12.033, Vol. 388 (2015)
  3. (Liquid + liquid) equilibria of (water + propionic acid + alcohol) ternary systems
    S. I. Kirbaslar, S. Sahin, M. Bilgin
    10.1016/j.jct.2006.05.001, Vol. 38 (2006)
  4. (Liquid + liquid) equilibria of (water + lactic acid + alcohol) ternary systems
    S. Sahin, S. I. Kirbaslar, M. Bilgin
    10.1016/j.jct.2008.07.014, Vol. 41 (2009)
  5. SLE and LLE for tri-butylphosphate or tri-octylamine contained systems; extractive solvents of Molybdenum
    J.-I. Kim, S.-J. Park, S.-d. Kim
    10.1016/j.fluid.2010.04.016, Vol. 295 (2010)
  6. Phase equilibria of didecyldimethylammonium nitrate ionic liquid with water and organic solvents
    U. Domanska, K. Lugowska, J. Pernak
    10.1016/j.jct.2006.10.009, Vol. 39 (2007)
  7. Experimental (Solid + Liquid) and (Liquid + Liquid) Equilibria and Excess Molar Volume of Alkanol + Acetonitrile, Propanenitrile, and Butanenitrile Mixtures
    U. Domanska, M. Marciniak
    10.1021/je050262m, Vol. 50 (2005)
  8. Measurements, Correlations, and Mod. UNIFAC (Do) Prediction of (Solid-Liquid) Phase Equilibria Diagrams in Binary Systems (Aliphatic Ketone + an Alcohol)
    U. Domanska, K. Paduszynski, J. Dabska
    10.1021/je100725a, Vol. 56 (2011)
  9. Phase Equilibria Study of the Binary Systems (N-Butyl-4-methylpyridinium Tosylate Ionic Liquid + Organic Solvent, or Water)
    U. Domanska, M. Krolikowski, A. Pobudkowska, T. M. Letcher
    10.1021/je8006309, Vol. 54 (2009)
  10. Solid-Liquid Equilibria, Excess Molar Volumes, and Molar Refractivity Deviations for Extractive Solvents of Molybdenum
    J.-I. Kim, Y.-Y. Choi, S. J. Park
    10.1021/je900586f, Vol. 55 (2010)

Checks

Deviation from the compiled data (ChemSep, ChEDL): Critical Temperature: 0.0%; Critical Pressure: 0.2%; Normal Boiling Point Temperature: 0.2%; Normal melting (fusion) point: 0.1%; Enthalpy of formation at standard conditions: 1.70 kJ/mol; Vapor pressure: 3.7%; Liquid phase heat capacity: 2.0%.