Cheméo RefData: trans-1,4-Dimethylcyclohexane (CAS 2207-04-7)

trans-1,4-Dimethylcyclohexane, 2D structure

Cheméo RefData 1.0

One consistent value set for simulation, built from chemeo v31.

Formula
C8H16
CAS
2207-04-7
Molecular Weight
112.22 g/mol
SMILES
C[C@H]1CC[C@H](C)CC1
InChI Key
QRMPKOFEUHIBNM-ZKCHVHJHSA-N
Cheméo is a service of Céondo GmbH, since 2007, we provide simulation, modelling and software development services for the industry. Do not hesitate to contact us for your projects.

Constants

PropertyValueUnitu95BasisSources
MW
Molecular Weight
112.22 g/mol derived
Tc
Critical Temperature
587.70 K 6.49 experimental KDB; NIST Webbook; literature: 1
Pc
Critical Pressure
2970.00 kPa 176.53 experimental KDB; literature: 1
Vc
Critical Volume
0.450 m3/kmol 0.027 experimental KDB
Zc
Critical Compressibility
0.2735137 derived
ω
Acentric Factor
0.2623 derived
Tboil
Normal Boiling Point Temperature
392.75 K 0.44 experimental KDB; NIST Webbook
Tfus
Normal melting (fusion) point
236.05 K 0.35 experimental KDB; NIST Webbook
ΔfH°gas
Enthalpy of formation at standard conditions
-184.70 kJ/mol 6.20 experimental KDB
ΔfG°
Standard Gibbs free energy of formation
31.74 kJ/mol 4.00 experimental KDB
Zra
Rackett Parameter
0.26 compiled Compiled value ChemSep v8.3 pure component data

Equations

PropertyEquationTemperature (K)Fit
Pvap
Vapor pressure
Y = exp(A + B/T + C·ln(T) + D·T^E)
Y in kPa, T in K
[236.21; 587.70] compiled, 39 points, AARD 0.5% against its inputs, published equations only: agreement with those equations, not with measurements
KDB Vapor Pressure Data; The Yaws Handbook of Vapor Pressure
A = 1.12276e+02, B = -7.84691e+03, C = -1.57195e+01, D = 1.58303e-02, E = 1.00000e+00
Cp,gas
Ideal gas heat capacity
Y = A + B·((C/T)/sinh(C/T))² + D·((E/T)/cosh(E/T))²
Y in J/mol×K, T in K
[200.00; 1500.00] compiled, 20 points, AARD 0.2% against its inputs, published equations only: agreement with those equations, not with measurements
ChemSep v8.3 pure component data
A = 1.03380e+02, B = 4.60413e+02, C = 7.43823e+02, D = -1.71916e+02, E = 7.79224e+02
Cp,liquid
Liquid phase heat capacity
Y = A + B·T + C·T² + D·T³ + E·T⁴
Y in J/mol×K, T in K
[240.00; 300.00] experimental, 10 points, AARD 0.0% against the measurements
A = 1.83899e+02, B = -3.35861e-01, C = 1.54133e-03, D = -3.95569e-07, E = 0.00000e+00
ΔvapH
Enthalpy of vaporization at a given temperature
Y = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc
Y in kJ/mol, T in K
[293.85; 528.93] experimental, 14 points, AARD 0.1% against the measurements
A = 6.78674e+01, B = 1.61375e+00, C = -2.01476e+00, D = 8.91835e-01, E = 0.00000e+00, Tc = 5.87700e+02 K
ρl
Liquid Density
Y = A / B^(1 + (1 − T/C)^D)
Y in kg/m3, T in K
[236.21; 569.20] compiled, 20 points, AARD 0.0% against its inputs, published equations only: agreement with those equations, not with measurements
ChemSep v8.3 pure component data
A = 1.54178e+01, B = 1.27876e-01, C = 5.87700e+02, D = 1.58000e-01
η
Dynamic viscosity
Y = exp(A + B/T + C·ln(T) + D·T^E)
Y in Pa×s, T in K
[236.21; 472.00] compiled, 20 points, AARD 0.1% against its inputs, published equations only: agreement with those equations, not with measurements
ChemSep v8.3 pure component data
A = -1.31714e+01, B = 1.26590e+03, C = 2.80589e-01, D = 0.00000e+00, E = 0.00000e+00
λliquid
Liquid thermal conductivity
Y = A + B·T + C·T² + D·T³ + E·T⁴
Y in W/m×K, T in K
[236.21; 392.51] compiled, 20 points, AARD 0.0% against its inputs, published equations only: agreement with those equations, not with measurements
ChemSep v8.3 pure component data
A = 1.35190e-01, B = 1.77058e-04, C = -1.20409e-06, D = 1.22084e-09, E = 0.00000e+00
λgas
Gas thermal conductivity
Y = A·T^B / (1 + C/T + D/T²)
Y in W/m×K, T in K
[236.21; 1000.00] compiled, 20 points, AARD 3.3% against its inputs, published equations only: agreement with those equations, not with measurements
ChemSep v8.3 pure component data
A = 1.08229e-05, B = 1.37669e+00, C = 4.33759e+02, D = 4.83632e+03
γ
Surface Tension
Y = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc
Y in N/m, T in K
[236.21; 583.48] compiled, 21 points, AARD 16.5% against its inputs, published equations only: agreement with those equations, not with measurements
ChemSep v8.3 pure component data
A = 2.76808e+01, B = 2.56173e+01, C = -3.85732e+01, D = 1.60146e+01, E = 0.00000e+00, Tc = 5.87700e+02 K

Equation of state

ModelTc (K)Pc (kPa)ωc1c2c3Volume shift (m³/kmol)Pvap AARD
PR 587.70 2970.00 0.2623 7.64233e-01 -1.22311e-01 5.33658e-01 -1.37694e-03 0.0%
SRK 587.70 2970.00 0.2623 9.28348e-01 -4.35597e-01 8.97297e-01 2.08582e-02 0.1%

a(T) = Ωa·R²·Tc²/Pc·α(T) and b = Ωb·R·Tc/Pc, with Pc in Pa and R = 8.314462618 J/(mol·K); PR: Ωa = 0.45724, Ωb = 0.07780; SRK: Ωa = 0.42748, Ωb = 0.08664.

Mathias-Copeman alpha function, with Tr = T/Tc:
α(T) = [1 + c1·(1 − √Tr) + c2·(1 − √Tr)² + c3·(1 − √Tr)³]² for T ≤ Tc,
α(T) = [1 + c1·(1 − √Tr)]² above Tc.

Péneloux volume shift: v = vEOS − volume shift, fitted to the liquid density at 0.7·Tc (0 when there is no liquid density).

A binary interaction parameter is valid only with these parameters, from RefData 1.0.

Literature

  1. DIPPR Project 851 - Thirty Years of Vapor-Liquid Critical Point Measurements and Experimental Technique Development
    Loren C. Wilson, Louis V. Jasperson, David VonNiederhausern, Neil F. Giles, Christian Ihmels
    10.1021/acs.jced.8b00298, Vol. 63 (2018)

Checks

Deviation from the compiled data (ChemSep, ChEDL): Critical Temperature: 0.4%; Critical Pressure: 1.0%; Critical Volume: 0.0%; Normal Boiling Point Temperature: 0.1%; Normal melting (fusion) point: 0.1%; Enthalpy of formation at standard conditions: 0.10 kJ/mol; Standard Gibbs free energy of formation: 0.03 kJ/mol; Vapor pressure: 2.1%; Liquid phase heat capacity: 0.0%; Enthalpy of vaporization at a given temperature: 1.1%.