| Property | Value | Unit | u95 | Basis | Sources |
|---|---|---|---|---|---|
| MW Molecular Weight |
134.22 | g/mol | derived | ||
| Tc Critical Temperature |
650.30 | K | 5.29 | experimental | KDB; NIST Webbook |
| Pc Critical Pressure |
3050.00 | kPa | 15.88 | experimental | KDB; NIST Webbook |
| Vc Critical Volume |
0.480 | m3/kmol | 0.029 | experimental | KDB |
| Zc Critical Compressibility |
0.2707654 | derived | |||
| ω Acentric Factor |
0.3803 | derived | |||
| Tboil Normal Boiling Point Temperature |
445.89 | K | 0.28 | experimental | KDB; NIST Webbook |
| Tfus Normal melting (fusion) point |
221.56 | K | 0.27 | experimental | KDB; NIST Webbook |
| ΔfH°gas Enthalpy of formation at standard conditions |
-21.50 | kJ/mol | 3.56 | experimental | KDB; NIST Webbook |
| ΔfG° Standard Gibbs free energy of formation |
138.80 | kJ/mol | compiled Compiled value | ChemSep v8.3 pure component data | |
| Zra Rackett Parameter |
0.27 | compiled Compiled value | ChemSep v8.3 pure component data |
| Property | Equation | Temperature (K) | Fit |
|---|---|---|---|
| Pvap Vapor pressure |
Y = exp(A + B/T + C·ln(T) + D·T^E) Y in kPa, T in K |
[221.70; 650.30] | compiled, 60 points, AARD 0.8% against its inputs, published equations only: agreement with those equations, not with measurements KDB Vapor Pressure Data; NIST Chemistry Webbook; The Yaws Handbook of Vapor Pressure |
| A = 8.74095e+01, B = -8.62161e+03, C = -1.05951e+01, D = 5.91291e-06, E = 2.00000e+00 | |||
| Cp,gas Ideal gas heat capacity |
Y = A + B·((C/T)/sinh(C/T))² + D·((E/T)/cosh(E/T))² Y in J/mol×K, T in K |
[221.70; 1500.00] | compiled, 20 points, AARD 0.1% against its inputs, published equations only: agreement with those equations, not with measurements ChemSep v8.3 pure component data |
| A = 1.03515e+02, B = 4.41147e+02, C = 1.43884e+03, D = 2.89149e+02, E = 6.54493e+02 | |||
| Cp,liquid Liquid phase heat capacity |
Y = A + B·T + C·T² + D·T³ + E·T⁴ Y in J/mol×K, T in K |
[221.70; 445.94] | compiled, 20 points, AARD 0.0% against its inputs, published equations only: agreement with those equations, not with measurements ChemSep v8.3 pure component data |
| A = 1.51633e+02, B = -1.05170e-01, C = 1.96045e-03, D = -2.02047e-06, E = 0.00000e+00 | |||
| ΔvapH Enthalpy of vaporization at a given temperature |
Y = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc Y in kJ/mol, T in K |
[221.70; 627.46] | derived, 29 points, AARD 0.3% against its inputs ChemSep v8.3 pure component data |
| A = 6.22637e+01, B = 4.21077e-01, C = 3.14462e-02, D = -8.72677e-02, E = 0.00000e+00, Tc = 6.50300e+02 K | |||
| ρl Liquid Density |
Y = A / B^(1 + (1 − T/C)^D) Y in kg/m3, T in K |
[221.70; 627.46] | compiled, 27 points, AARD 0.0% against its inputs, published equations only: agreement with those equations, not with measurements ChemSep v8.3 pure component data |
| A = 7.26312e+01, B = 2.60683e-01, C = 6.50300e+02, D = 3.06000e-01 | |||
| η Dynamic viscosity |
Y = exp(A + B/T + C·ln(T) + D·T^E) Y in Pa×s, T in K |
[303.15; 313.15] | experimental, 6 points, AARD 0.0% against the measurements |
| A = 3.91020e+02, B = -1.70632e+04, C = -5.98053e+01, D = 0.00000e+00, E = 0.00000e+00 | |||
| λliquid Liquid thermal conductivity |
Y = A + B·T + C·T² + D·T³ + E·T⁴ Y in W/m×K, T in K |
[221.70; 445.94] | compiled, 20 points, AARD 0.0% against its inputs, published equations only: agreement with those equations, not with measurements ChemSep v8.3 pure component data |
| A = 1.57954e-01, B = -2.37266e-05, C = -4.73032e-07, D = 4.46874e-10, E = 0.00000e+00 | |||
| λgas Gas thermal conductivity |
Y = A·T^B / (1 + C/T + D/T²) Y in W/m×K, T in K |
[221.70; 1000.00] | compiled, 20 points, AARD 2.0% against its inputs, published equations only: agreement with those equations, not with measurements ChemSep v8.3 pure component data |
| A = 1.83995e-05, B = 1.26492e+00, C = 3.97644e+02, D = 4.26207e+03 | |||
| γ Surface Tension |
Y = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc Y in N/m, T in K |
[221.65; 606.10] | compiled, 38 points, AARD 0.5% against its inputs, published equations only: agreement with those equations, not with measurements Jasper (1972), surface tension of pure liquid compounds; ChemSep v8.3 pure component data |
| A = 5.65448e-02, B = 1.04379e+00, C = 4.93968e-01, D = -2.85626e-01, E = 0.00000e+00, Tc = 6.50300e+02 K | |||
| Model | Tc (K) | Pc (kPa) | ω | c1 | c2 | c3 | Volume shift (m³/kmol) | Pvap AARD |
|---|---|---|---|---|---|---|---|---|
| PR | 650.30 | 3050.00 | 0.3803 | 9.70237e-01 | -4.22480e-01 | 8.00652e-01 | -1.17931e-02 | 0.1% |
| SRK | 650.30 | 3050.00 | 0.3803 | 1.15020e+00 | -7.89880e-01 | 1.23743e+00 | 1.16397e-02 | 0.2% |
a(T) = Ωa·R²·Tc²/Pc·α(T) and b = Ωb·R·Tc/Pc, with Pc in Pa and R = 8.314462618 J/(mol·K); PR: Ωa = 0.45724, Ωb = 0.07780; SRK: Ωa = 0.42748, Ωb = 0.08664.
Mathias-Copeman alpha function, with Tr = T/Tc:
α(T) = [1 + c1·(1 − √Tr) + c2·(1 − √Tr)² + c3·(1 − √Tr)³]² for T ≤ Tc,
α(T) = [1 + c1·(1 − √Tr)]² above Tc.
Péneloux volume shift: v = vEOS − volume shift, fitted to the liquid density at 0.7·Tc (0 when there is no liquid density).
A binary interaction parameter is valid only with these parameters, from RefData 1.0.
Deviation from the compiled data (ChemSep, ChEDL): Critical Temperature: 0.0%; Critical Pressure: 0.0%; Critical Volume: 0.0%; Normal Boiling Point Temperature: 0.0%; Normal melting (fusion) point: 0.1%; Enthalpy of formation at standard conditions: 0.96 kJ/mol; Vapor pressure: 4.3%; Dynamic viscosity: 1.8%.