Chemical Properties of 1H-Indene, 2,3-dihydro-1,1,4,7-tetramethyl- (CAS 1078-04-2)

InChI

InChI=1S/C13H18/c1-9-5-6-10(2)12-11(9)7-8-13(12,3)4/h5-6H,7-8H2,1-4H3

InChI Key

IFZVSOLCUIWLFW-UHFFFAOYSA-N

Formula

C13H18

SMILES

Cc1ccc(C)c2c1CCC2(C)C

Molecular Weight¹

174.29

CAS

1078-04-2

Other Names

• 1,1,4,7-Tetramethylindan
• Indan, 1,1,4,7-tetramethyl-

• Δ_cH°_liquid : Standard liquid enthalpy of combustion (kJ/mol).
• C_p,gas : Ideal gas heat capacity (J/mol×K).
• C_p,liquid : Liquid phase heat capacity (J/mol×K).
• C_sat : Molar heat capacity at saturation pressure (J/mol×K).
• Δ_fH°_gas : Enthalpy of formation at standard conditions (kJ/mol).
• Δ_fH°_liquid : Liquid phase enthalpy of formation at standard conditions (kJ/mol).
• Δ_fusH° : Enthalpy of fusion at standard conditions (kJ/mol).
• Δ_fusH : Enthalpy of fusion at a given temperature (kJ/mol).
• Δ_vapH° : Enthalpy of vaporization at standard conditions (kJ/mol).
• Δ_vapH : Enthalpy of vaporization at a given temperature (kJ/mol).
• logP_oct/wat : Octanol/Water partition coefficient.
• McVol : McGowan's characteristic volume (ml/mol).
• I_np : Non-polar retention indices.
• S°_liquid : Liquid phase molar entropy at standard conditions (J/mol×K).
• T_fus : Normal melting (fusion) point (K).
• T_triple : Triple Point Temperature (K).
• ¹: Molecular weight from the IUPAC atomic weights tables.

Physical Properties

Property	Value	Unit	Source
ΔcH°liquid	-7564.20 ± 1.70	kJ/mol	NIST
ΔfH°gas	-62.50 ± 1.90	kJ/mol	NIST
ΔfH°liquid	-123.90 ± 1.80	kJ/mol	NIST
ΔfusH°	14.14	kJ/mol	Joback Calculated Property
ΔvapH°	[61.37; 61.40]	kJ/mol
ΔvapH°	61.37 ± 0.61	kJ/mol	NIST
ΔvapH°	61.40 ± 0.60	kJ/mol	NIST
logPoct/wat	3.527		Crippen Calculated Property
McVol	159.410	ml/mol	McGowan Calculated Property
Inp	1333.00		NIST
S°liquid	343.50	J/mol×K	NIST
Tfus	264.30	K	Relay (1.0) Calculated Property
Ttriple	[245.55; 245.55]	K
Ttriple	245.55 ± 0.01	K	NIST
Ttriple	245.55 ± 0.01	K	NIST

Cheméo can also estimate Normal Boiling Point Temperature, Critical Temperature, Critical Pressure, Critical Volume, Standard Gibbs free energy of formation, Acentric Factor, Ionization energy, Log10 of Water solubility in mol/l for this compound, but they fall outside the models' validated range, so they are not shown here. Open the prediction tool to compute them on demand.

Temperature Dependent Properties

Property	Value	Unit	Temperature (K)	Source
Cp,gas	[379.74; 469.93]	J/mol×K	[545.44; 769.28]
Cp,gas	379.74	J/mol×K	545.44	Joback Calculated Property
Cp,gas	397.09	J/mol×K	582.75	Joback Calculated Property
Cp,gas	413.31	J/mol×K	620.05	Joback Calculated Property
Cp,gas	428.55	J/mol×K	657.36	Joback Calculated Property
Cp,gas	442.97	J/mol×K	694.67	Joback Calculated Property
Cp,gas	456.71	J/mol×K	731.97	Joback Calculated Property
Cp,gas	469.93	J/mol×K	769.28	Joback Calculated Property
Cp,liquid	302.50	J/mol×K	298.15	NIST
Csat	[240.20; 352.00]	J/mol×K	[170.00; 380.00]
Csat	240.20	J/mol×K	170.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	243.60	J/mol×K	180.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	247.30	J/mol×K	190.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	251.30	J/mol×K	200.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	255.60	J/mol×K	210.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	260.10	J/mol×K	220.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	264.90	J/mol×K	230.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	269.90	J/mol×K	240.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	275.20	J/mol×K	250.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	280.60	J/mol×K	260.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	286.20	J/mol×K	270.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	287.90	J/mol×K	273.15	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	291.90	J/mol×K	280.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	297.70	J/mol×K	290.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	302.50	J/mol×K	298.15	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	303.60	J/mol×K	300.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	309.60	J/mol×K	310.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	315.70	J/mol×K	320.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	321.80	J/mol×K	330.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	327.90	J/mol×K	340.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	334.00	J/mol×K	350.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	340.00	J/mol×K	360.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	346.10	J/mol×K	370.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Csat	352.00	J/mol×K	380.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
ΔfusH	[11.28; 11.28]	kJ/mol	[245.55; 245.60]
ΔfusH	11.28	kJ/mol	245.55	NIST
ΔfusH	11.28	kJ/mol	245.55	NIST
ΔfusH	11.28	kJ/mol	245.60	NIST
ΔvapH	[52.00; 60.40]	kJ/mol	[350.50; 450.00]
ΔvapH	59.60	kJ/mol	350.50	NIST
ΔvapH	60.40	kJ/mol	391.00	NIST
ΔvapH	52.00	kJ/mol	450.00	NIST

Similar Compounds

Find more compounds similar to 1H-Indene, 2,3-dihydro-1,1,4,7-tetramethyl-.

Sources

• Cheméo Relay (1.0)
• Cheméo Relay (1.0, beta) Beta: served but experimental, data-limited and below our cross-validation release bar; the Joback value is recommended where available.
• Crippen Method
• Crippen Method
• Joback Method
• McGowan Method
• NIST Webbook
• Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD

Note: Cheméo is only indexing the data, follow the source links to retrieve the latest data. The source is also providing more information like the publication year, authors and more. Take the time to validate and double check the source of the data.
These property values are available through the Cheméo API. A free account gives you an access key.