Property
Value
Unit
Source
ω
[0.3457; 0.3506]
ω
0.3457
PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
ω
0.3506
Passut and Danner (1973), critical constants and acentric factors Compiled value
ω
0.3500
ChemSep v8.3 pure component data Compiled value
ω
0.3490
KDB
Tig
[477.15; 495.93]
K
Tig
495.93
K
KDB
Tig
477.15
K
NCMS SOLV-DB
αp
0.00
1/K
Excess molar volumes and dynamic viscosities for binary mixtures of toluene + n-alkanes (C5 C10) at T = 298.15 K Comparison with Prigogine Flory Patterson theory i
Standard Ambient Temperature and Pressure (SATP)
AP
342.850
K
KDB
Δc H°liquid
[-4830.00; -4810.30]
kJ/mol
Δc H°liquid
Outlier -4830.00 ± 120.00
kJ/mol
NIST i Delafontaine, Sabbah, et al., 1973
«DELTA» U value; Corresponding «DELTA»fHºliquid = -216. kJ/mol (simple calculation by NIST; no Washburn corrections)
Δc H°liquid
-4818.70
kJ/mol
NIST i Skuratov, Kozina, et al., 1957
Corresponding «DELTA»fHºliquid = -223. kJ/mol (simple calculation by NIST; no Washburn corrections)
Δc H°liquid
-4816.91 ± 0.63
kJ/mol
NIST i Prosen and Rossini, 1945
Corresponding «DELTA»fHºliquid = -224.3 kJ/mol (simple calculation by NIST; no Washburn corrections)
Δc H°liquid
-4817.16 ± 0.88
kJ/mol
NIST i Prosen and Rossini, 1944
Corresponding «DELTA»fHºliquid = -224.1 kJ/mol (simple calculation by NIST; no Washburn corrections)
Δc H°liquid
-4815.00 ± 1.00
kJ/mol
NIST i Davies and Gilbert, 1941
Corresponding «DELTA»fHºliquid = -226.5 kJ/mol (simple calculation by NIST; no Washburn corrections)
Δc H°liquid
-4810.30
kJ/mol
NIST i Jones and Starr, 1941
Corresponding «DELTA»fHºliquid = -231. kJ/mol (simple calculation by NIST; no Washburn corrections)
Δc H°liquid
-4817.00 ± 1.50
kJ/mol
NIST i Jessup, 1937
Reanalyzed by Cox and Pilcher, 1970, Original value = -4814.0 kJ/mol; Corresponding «DELTA»fHºliquid = -224.2 kJ/mol (simple calculation by NIST; no Washburn corrections)
Cp,liquid
223.91
J/mol×K
THERMODYNAMICS OF MIXTURES CONTAINING AMINES. XIV. CpEm OF BENZYLAMINE WITH HEPTANE AT 293.15 K OR WITH METHANOL, 1-PROPANOL OR 1-PENTANOL AT (293.15-308.15) K i
Standard Ambient Temperature and Pressure (SATP)
μ
[0.00; 0.00]
debye
μ
0.00
debye
ChemSep v8.3 pure component data Compiled value
μ
0.00
debye
KDB
η
0.0003950
Pa×s
Excess molar volumes and dynamic viscosities for binary mixtures of toluene + n-alkanes (C5 C10) at T = 298.15 K Comparison with Prigogine Flory Patterson theory i
Standard Ambient Temperature and Pressure (SATP)
εr
1.93
NCMS SOLV-DB
LFL
1.00
% in Air
KDB
UFL
7.00
% in Air
KDB
Tflash,cc
269.15
K
NCMS SOLV-DB
Tflash,oc
269.26
K
KDB
Δf G°
[8.00; 8.16]
kJ/mol
Δf G°
8.16
kJ/mol
ChemSep v8.3 pure component data Compiled value
Δf G°
8.00
kJ/mol
KDB
Rg
4.2670
KDB
Δc,gross H
4816.91
kJ/mol
KDB
Δc,net H
4464.788
kJ/mol
KDB
Δf H°gas
[-189.30; -187.34]
kJ/mol
Δf H°gas
-187.34 ± 0.74
kJ/mol
Active Thermochemical Tables 1.112, gas-phase enthalpies of formation Compiled value
Δf H°gas
-187.65
kJ/mol
ChemSep v8.3 pure component data Compiled value
Δf H°gas
-187.90
kJ/mol
KDB
Δf H°gas
-187.80 ± 0.79
kJ/mol
NIST Prosen and Rossini, 1945
Δf H°gas
-189.30
kJ/mol
NIST i Davies and Gilbert, 1941
Value computed using «DELTA»fHliquid° value of -225.9±1.3 kj/mol from Davies and Gilbert, 1941 and «DELTA»vapH° value of 36.6 kj/mol from Prosen and Rossini, 1945.
Δf H°liquid
[-225.90; -224.40]
kJ/mol
Δf H°liquid
-224.40 ± 0.79
kJ/mol
NIST Prosen and Rossini, 1945
Δf H°liquid
-225.90 ± 1.30
kJ/mol
NIST Davies and Gilbert, 1941
Δfus H°
14.06
kJ/mol
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Δvap H°
[32.00; 36.90]
kJ/mol
Δvap H°
36.57
kJ/mol
NCMS SOLV-DB
Δvap H°
36.66
kJ/mol
NIST Majer and Svoboda, 1985
Δvap H°
36.60
kJ/mol
NIST Ruzicka and Majer, 1994
Δvap H°
36.90
kJ/mol
NIST Jakli, Tzias, et al., 1979
Δvap H°
36.60 ± 0.10
kJ/mol
NIST Majer, Svoboda, et al., 1979
Δvap H°
36.55
kJ/mol
NIST Reid, 1972
Δvap H°
36.54
kJ/mol
NIST Osborne and Ginnings, 1947
Δvap H°
Outlier 32.00 ± 0.20
kJ/mol
NIST Mathews, 1926
IE
[9.83; 10.16]
eV
IE
9.93 ± 0.10
eV
NIST N/A
IE
10.15
eV
NIST Luo and Pacey, 1992
IE
9.93 ± 0.10
eV
NIST i Lias, 1982
LBLHLM
IE
9.83 ± 0.15
eV
NIST Mautner(Meot-Ner), Sieck, et al., 1981
IE
9.91
eV
NIST Lias, Ausloos, et al., 1976
IE
9.90 ± 0.05
eV
NIST Brehm, 1966
IE
10.16
eV
NIST Turner and Al-Joboury, 1964
IE
10.08
eV
NIST Watanabe, Nakayama, et al., 1962
log 10 WS
[-4.53; -4.53]
log 10 WS
-4.53
Aq. Solubility Prediction
log 10 WS
-4.53
Estimated Solubility
log Poct/wat
4.397
NCMS SOLV-DB
McVol
109.490
ml/mol
McGowan Calculated Property
NFPA Fire
3
NCMS SOLV-DB
NFPA Health
1
NCMS SOLV-DB
NFPA Safety
0
NCMS SOLV-DB
Pc
[2723.80; 2801.64]
kPa
Pc
2736.00
kPa
Measurement of critical properties for binary and ternary mixtures containing potential gasoline additive diethyl carbonate (DEC)
Pc
2761.00
kPa
Measurement of critical temperatures and critical pressures for binary mixtures of methyl tert-butyl ether (MTBE) + alcohol and MTBE + alkane
Pc
2761.00
kPa
Measurement and correlation of critical properties for binary mixtures and ternary mixtures containing gasoline additives
Pc
2736.00
kPa
Experimental determination of critical data of multi-component mixtures containing potential gasoline additives 2-butanol by a flow-type apparatus
Pc
2736.00
kPa
Measurement of Critical Properties for Binary and Ternary Mixtures Containing n-Butanol and n-Alkane
Pc
2736.00
kPa
Determination of the Critical Properties of C6 C10 n-Alkanes and Their Binary Systems Using a Flow Apparatus
Pc
2740.00
kPa
IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 2 Compiled value
Pc
2733.75
kPa
PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Pc
2735.84
kPa
Passut and Danner (1973), critical constants and acentric factors Compiled value
Pc
2740.00
kPa
ChemSep v8.3 pure component data Compiled value
Pc
2740.00
kPa
KDB
Pc
2740.00 ± 30.00
kPa
NIST Ambrose and Tsonopoulos, 1995
Pc
2730.00 ± 40.00
kPa
NIST Nikitin, Pavlov, et al., 1994
Pc
2730.00 ± 30.00
kPa
NIST Nikitin, Pavlov, et al., 1993
Pc
2730.00 ± 10.00
kPa
NIST Quadri, Khilar, et al., 1991
Pc
2734.00 ± 20.00
kPa
NIST Rosenthal and Teja, 1989
Pc
2736.00
kPa
NIST Teja, Lee, et al., 1989
Pc
2734.00 ± 5.00
kPa
NIST i Brunner, 1988
Visual, optical cell 30cm high. P transducer cal. vs PB.
Pc
2775.00 ± 5.00
kPa
NIST i Zawisza and Vejrosta, 1982
Visual
Pc
2760.00 ± 50.66
kPa
NIST Kobe and Mathews, 1970
Pc
2736.52 ± 17.23
kPa
NIST Kreglewski and Kay, 1969
Pc
2736.00 ± 40.53
kPa
NIST McMicking and Kay, 1965
Pc
2770.00 ± 50.66
kPa
NIST Kay, 1964
Pc
2750.00 ± 34.50
kPa
NIST Kobe, Crawford, et al., 1955
Pc
2730.31 ± 20.68
kPa
NIST Kay, 1941
Pc
2730.00 ± 103.42
kPa
NIST Kay, 1938
Pc
2735.77 ± 4.05
kPa
NIST i Beattie and Kay, 1937
based on obs. pvt isotherms
Pc
2735.77 ± 5.06
kPa
NIST Smith, Beattie, et al., 1937
Pc
Outlier 2801.64 ± 20.26
kPa
NIST i Edgar and Calingaert, 1929
measured by Keys and Kleinschmidt; Data excluded from overall average
Pc
2723.80 ± 26.70
kPa
NIST Young, 1910
Ptriple
1.83e-04
kPa
ChemSep v8.3 pure component data Compiled value
ρc
[232.47; 241.49]
kg/m3
ρc
234.47 ± 3.01
kg/m3
NIST Ambrose and Tsonopoulos, 1995
ρc
232.47 ± 10.02
kg/m3
NIST Steele, 1992
ρc
233.47 ± 6.01
kg/m3
NIST Anselme, Gude, et al., 1990
ρc
232.47
kg/m3
NIST Teja, Lee, et al., 1989
ρc
234.47 ± 5.01
kg/m3
NIST Kobe and Mathews, 1970
ρc
232.47 ± 5.01
kg/m3
NIST McMicking and Kay, 1965
ρc
241.49 ± 15.03
kg/m3
NIST Kobe, Crawford, et al., 1955
ρc
234.67 ± 1.60
kg/m3
NIST Kay, 1941
ρc
234.71 ± 1.60
kg/m3
NIST Kay, 1938
ρc
241.49 ± 2.00
kg/m3
NIST i Beattie and Kay, 1937
based on obs. pvt isottherms
ρc
241.49 ± 5.01
kg/m3
NIST Smith, Beattie, et al., 1937
ρc
234.07 ± 3.01
kg/m3
NIST i Young, 1910
extrapolate obs. dens. to Tc
S°liquid
[326.40; 330.10]
J/mol×K
S°liquid
328.57
J/mol×K
NIST Huffman, Gross, et al., 1961
S°liquid
327.98
J/mol×K
NIST Douglas, Furukawa, et al., 1954
S°liquid
328.86
J/mol×K
NIST Pitzer K.S., 1940
S°liquid
330.10
J/mol×K
NIST i Huffman, Parks, et al., 1930
Extrapolation below 90 K, 71.00 J/mol*K. Based on previously published specific heat data, 30PAR/HUF.
S°liquid
326.40
J/mol×K
NIST i Parks, Huffman, et al., 1930
Extrapolation below 90 K, 71.00 J/mol*K.
Tboil
[370.30; 372.00]
K
Tboil
371.47
K
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Tboil
371.35
K
Measurements and correlation of vapour liquid equilibria of 2-butanone and hydrocarbons binary systems at two different pressures
Tboil
371.64
K
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Tboil
371.64
K
Isobaric vapor-liquid equilibrium for four binary systems of 3-methylthiophene
Tboil
371.40
K
Isobaric vapor-liquid equilibrium for binary systemsof toluene + o-xylene, benzene + o-xylene, nonane + benzene and nonane + heptane at 101.3 kPa
Tboil
371.40
K
Isobaric vapor-liquid equilibrium for binary systemsof toluene + o-xylene, benzene + o-xylene, nonane + benzene and nonane + heptane at 101.3 kPa
Tboil
371.64
K
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Tboil
371.56
K
Solutions of alkyl methanoates and alkanes: Simultaneous modeling of phase equilibria and mixing properties. Estimation of behavior by UNIFAC with recalculation of parameters
Tboil
371.56
K
Solutions of alkyl methanoates and alkanes: Simultaneous modeling of phase equilibria and mixing properties. Estimation of behavior by UNIFAC with recalculation of parameters
Tboil
371.50
K
Excess molar volumes of the ternary system {methylcyclohexane (1) + cyclohexane (2) + n-alkanes (3)} at T = 298.15 K
Tboil
371.53
K
Isobaric vapor-liquid equilibrium of three binary systems containing dimethyl succinate, dimethyl glutarate and dimethyl adipate at 2, 5.2 and 8.3 kPa
Tboil
371.35
K
Excess volumes, densities, speeds of sound and viscosities for the binary systems of diisopropyl ether with hydrocarbons at 303.15K
Tboil
371.28
K
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Tboil
Outlier 370.97
K
A New Test System for Distillation Efficiency Experiments at Elevated Liquid Viscosities: Vapor-Liquid Equilibrium and Liquid Viscosity Data for Cyclopentanol + Cyclohexanol
Tboil
371.35
K
Isobaric Vapor-Liquid Equilibria and Excess Properties for the Binary Systems of Methyl Esters + Heptane
Tboil
371.18
K
Densities and Excess Molar Properties of Dimethyl Carbonate with Alkanes (C6 to C10) and VLE of Dimethyl Carbonate with Alkanes (C9 to C10) at 101.3 kPa
Tboil
371.76
K
Vapor-Liquid Equilibrium Data for the Binary Decafluoropentane (HFC-43-10meec) + Heptane, Decafluoropentane + Butyl Ethyl Ether, Octafluorobutane (HFC-338pcc) + Butyl Ethyl Ether, and Heptafluoro Propyl Methyl Ether (HFE-347mcc) + HFC-338pcc Systems at 101.3 kPa
Tboil
371.56
K
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Tboil
371.50
K
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Tboil
371.38
K
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Tboil
371.51
K
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Tboil
371.55
K
Multiproperty Correlation of Experimental Data of the Binaries Propyl Ethanoate + Alkanes (Pentane to Decane). New Experimental Information for Vapor Liquid Equilibrium and Mixing Properties
Tboil
371.38
K
Improvements in the Experimentation and the Representation of Thermodynamic Properties (iso-p VLE and yE) of Alkyl Propanoate + Alkane Binaries
Tboil
371.65
K
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Tboil
371.57
K
ChemSep v8.3 pure component data Compiled value
Tboil
371.60
K
KDB
Tboil
371.57
K
NCMS SOLV-DB
Tboil
371.50 ± 0.20
K
NIST Wisniak, Fishman, et al., 1998
Tboil
371.46 ± 0.10
K
NIST Wisniak, Apelblat, et al., 1995
Tboil
371.55 ± 0.10
K
NIST Tojo, Ramallo, et al., 1994
Tboil
371.80 ± 0.30
K
NIST Ramanjaneyulu, Surendranath, et al., 1989
Tboil
371.35 ± 0.40
K
NIST Schrodt and Akel, 1989
Tboil
371.60
K
NIST Weast and Grasselli, 1989
Tboil
371.46 ± 0.10
K
NIST Paul, Krug, et al., 1986
Tboil
371.55 ± 0.50
K
NIST Choi, Park, et al., 1985
Tboil
371.60
K
NIST Majer and Svoboda, 1985
Tboil
371.54 ± 0.01
K
NIST Malijevska and Vlckova, 1985
Tboil
371.53 ± 0.30
K
NIST Eng and Sandler, 1984
Tboil
371.60 ± 0.20
K
NIST Reddy, Reddy, et al., 1982
Tboil
371.50 ± 0.50
K
NIST i Otsa, Kudryavtseva, et al., 1980
no exp. details; not clear whether obs. or literature data
Tboil
371.35 ± 0.30
K
NIST Wisniak, Apelblat, et al., 1980
Tboil
371.64 ± 0.08
K
NIST Treszczanowicz and Treszczanowicz, 1979
Tboil
371.53 ± 0.10
K
NIST Wisniak and Tamir, 1977
Tboil
Outlier 372.00 ± 2.00
K
NIST i Christopher, Laukhuf, et al., 1976
Data excluded from overall average
Tboil
371.60 ± 0.30
K
NIST Tripathi and Asselineau, 1975
Tboil
371.60 ± 0.40
K
NIST Tripathi, RajaRam, et al., 1975
Tboil
371.55 ± 0.20
K
NIST Scheller and Narasimha Rao, 1973
Tboil
371.50 ± 0.50
K
NIST Lesteva, Timofeev, et al., 1972
Tboil
371.55 ± 0.20
K
NIST Maripuri and Ratcliff, 1972
Tboil
371.57 ± 0.20
K
NIST Letcher and Bayles, 1971
Tboil
371.55 ± 0.10
K
NIST Hlousek and Hala, 1970
Tboil
371.55 ± 0.30
K
NIST Neruchev, Zotov, et al., 1969
Tboil
371.25 ± 0.30
K
NIST Scheller, Torres-Soto, et al., 1969
Tboil
371.55 ± 0.20
K
NIST Fu and Lu, 1968
Tboil
Outlier 371.00 ± 0.30
K
NIST i Kemula, Buchowski, et al., 1968
Data excluded from overall average
Tboil
371.45 ± 0.40
K
NIST Rao, Chiranjivi, et al., 1968
Tboil
371.60 ± 0.40
K
NIST Gilmour, Zwicker, et al., 1967
Tboil
371.59 ± 0.10
K
NIST Hanson and Van Winkle, 1967
Tboil
371.55 ± 0.20
K
NIST Gurukul and Raju, 1966
Tboil
371.70 ± 0.30
K
NIST i Aristovich, Morachevskii, et al., 1965
from IDS 1880, (1), 27
Tboil
371.77 ± 0.15
K
NIST Maczynska and Zieborak, 1963
Tboil
371.46 ± 0.05
K
NIST Brzostowski, 1960
Tboil
Outlier 370.65 ± 1.50
K
NIST i Jeffreys, 1960
Data excluded from overall average
Tboil
Outlier 371.00 ± 3.00
K
NIST i Shuikin, Bel'skii, et al., 1960
Data excluded from overall average
Tboil
371.60 ± 0.20
K
NIST Anonymous, 1959
Tboil
371.68 ± 0.20
K
NIST Yen and Reed, 1959
Tboil
371.65 ± 0.70
K
NIST Goodman, 1958
Tboil
371.55 ± 0.50
K
NIST Hollo, Lengyel, et al., 1958
Tboil
371.55 ± 0.50
K
NIST Wagner and Weber, 1958
Tboil
371.58 ± 0.20
K
NIST Desty and Whyman, 1957
Tboil
371.55 ± 0.50
K
NIST Katz and Newman, 1956
Tboil
371.55 ± 0.50
K
NIST Nerheim and Dinerstein, 1956
Tboil
371.55 ± 0.30
K
NIST Brown, Mathieson, et al., 1955
Tboil
371.55 ± 0.40
K
NIST Cutting and Jones, 1955
Tboil
371.55 ± 0.50
K
NIST Garner and Hall, 1955
Tboil
371.65 ± 0.30
K
NIST Hammond and Stokes, 1955
Tboil
371.45 ± 0.15
K
NIST Jones and Ottewill, 1955
Tboil
371.55 ± 0.50
K
NIST Lichtenfels, Fleck, et al., 1955
Tboil
371.60 ± 0.20
K
NIST Myers, 1955
Tboil
371.45 ± 0.30
K
NIST i Neff and Hickman, 1955
not certain that this was measured
Tboil
371.58 ± 0.08
K
NIST Rose and Williams, 1955
Tboil
371.60 ± 0.20
K
NIST Colonge and Berthoud, 1952
Tboil
371.57 ± 0.02
K
NIST Pomerantz, 1952
Tboil
371.58 ± 0.20
K
NIST Stevenson, Wagner, et al., 1952
Tboil
371.55 ± 0.10
K
NIST Anonymous, 1951
Tboil
371.50 ± 0.15
K
NIST Anonymous, 1951
Tboil
371.60 ± 0.30
K
NIST Eduljee, Newitt, et al., 1951
Tboil
Outlier 370.30 ± 1.00
K
NIST i Schiessler, Speck, et al., 1951
Data excluded from overall average
Tboil
371.55 ± 0.30
K
NIST Tilicheev, Peshkov, et al., 1951
Tboil
371.57 ± 0.30
K
NIST Westerdijk, Waterman, et al., 1950
Tboil
371.55 ± 0.20
K
NIST Denyer, Fidler, et al., 1949
Tboil
371.57 ± 0.30
K
NIST Foehr and Fenske, 1949
Tboil
371.57 ± 0.03
K
NIST Forziati and Rossini, 1949
Tboil
371.68 ± 0.15
K
NIST Freiser, Hobbs, et al., 1949
Tboil
371.55 ± 0.30
K
NIST Lecat, 1949
Tboil
371.55 ± 0.30
K
NIST Lecat, 1949, 2
Tboil
371.45 ± 0.50
K
NIST Steinhauser and White, 1949
Tboil
371.40 ± 0.50
K
NIST Tilicheev and Milovidova, 1949
Tboil
371.65 ± 0.50
K
NIST Treybal and Vondrak, 1949
Tboil
371.59 ± 0.30
K
NIST Eischens and Selwood, 1948
Tboil
371.54 ± 0.20
K
NIST Ipatieff and Schmerling, 1948
Tboil
371.55 ± 0.30
K
NIST Lecat, 1948
Tboil
371.60 ± 0.30
K
NIST Rossini, 1948
Tboil
371.56 ± 0.15
K
NIST Appleby, Avery, et al., 1947
Tboil
371.55 ± 0.30
K
NIST Fenske, Braun, et al., 1947
Tboil
371.60 ± 0.20
K
NIST Fenske, Carlson, et al., 1947
Tboil
371.10 ± 0.70
K
NIST i Hunter and Brown, 1947
Data excluded from overall average
Tboil
371.55 ± 0.50
K
NIST Komarewsky and Ulick, 1947
Tboil
371.55 ± 0.30
K
NIST Lecat, 1947
Tboil
371.55 ± 0.30
K
NIST Lecat, 1947, 2
Tboil
371.60 ± 0.40
K
NIST Lecat, 1947, 3
Tboil
371.60 ± 0.30
K
NIST Lecat, 1947, 4
Tboil
371.55 ± 0.70
K
NIST Obolentsev and Usov, 1947
Tboil
371.55 ± 0.60
K
NIST Tsobkallo, 1947
Tboil
371.40 ± 1.00
K
NIST Vol'f and Zabryanskii, 1947
Tboil
371.54 ± 0.10
K
NIST Anonymous, 1946
Tboil
371.55 ± 0.50
K
NIST Fawcett, 1946
Tboil
371.57 ± 0.01
K
NIST Forziati, Glasgow, et al., 1946
Tboil
371.57 ± 0.30
K
NIST Grummitt, Case, et al., 1946
Tboil
371.55 ± 0.30
K
NIST Lecat, 1946
Tboil
371.55 ± 0.30
K
NIST Lecat, 1946, 2
Tboil
371.55 ± 0.50
K
NIST Marschner and Cropper, 1946
Tboil
371.57 ± 0.30
K
NIST Russell and Stokes, 1946
Tboil
371.70 ± 0.20
K
NIST Fidler, 1945
Tboil
371.55 ± 0.50
K
NIST Greensfelder and Voge, 1945
Tboil
371.55 ± 0.30
K
NIST Grummitt, Sensel, et al., 1945
Tboil
371.20 ± 0.70
K
NIST Herr, Whitmore, et al., 1945
Tboil
371.54 ± 0.15
K
NIST Anonymous, 1944
Tboil
Outlier 372.00 ± 1.50
K
NIST i Appleby, Dobratz, et al., 1944
Data excluded from overall average
Tboil
371.55 ± 0.50
K
NIST Beggerow and Harteck, 1944
Tboil
371.58 ± 0.05
K
NIST Forziati, Willingham, et al., 1944
Tboil
371.15 ± 1.00
K
NIST Komarewsky and Shand, 1944
Tboil
371.55 ± 0.20
K
NIST Mair and Forziati, 1944
Tboil
371.70 ± 0.20
K
NIST Anonymous, 1943
Tboil
371.15 ± 2.00
K
NIST Komarewsky and Kritchevsky, 1943
Tboil
371.55 ± 0.25
K
NIST Lecat, 1943
Tboil
371.75 ± 0.40
K
NIST McArdle and Robertson, 1943
Tboil
371.55 ± 1.00
K
NIST Plate and Tarasova, 1943
Tboil
371.60 ± 0.30
K
NIST Rossini, 1943
Tboil
371.35 ± 1.00
K
NIST Ruhle, 1943
Tboil
371.58 ± 0.03
K
NIST Willingham, 1943
Tboil
371.40 ± 0.50
K
NIST Green, 1942
Tboil
371.55 ± 0.50
K
NIST Koch and Hilberath, 1942
Tboil
371.65 ± 0.30
K
NIST McArdle and Robertson, 1942
Tboil
371.57 ± 0.30
K
NIST i Rank, Scott, et al., 1942
not clear if this was measured by authors
Tboil
371.65 ± 0.50
K
NIST Stauff and Schumacher, 1942
Tboil
371.65 ± 0.30
K
NIST Anonymous, 1941
Tboil
Outlier 371.00 ± 1.00
K
NIST i Butler, 1941
Data excluded from overall average
Tboil
371.15 ± 1.00
K
NIST Crawley, 1941
Tboil
371.60 ± 0.20
K
NIST Davies and Gilbert, 1941
Tboil
371.57 ± 0.10
K
NIST Davies and Gilbert, 1941
Tboil
371.56 ± 0.20
K
NIST Day and Pease, 1941
Tboil
371.55 ± 0.30
K
NIST Jones and Starr, 1941
Tboil
371.55 ± 1.00
K
NIST Sergienko, 1941
Tboil
371.57 ± 0.03
K
NIST Brooks, Howard, et al., 1940
Tboil
371.55 ± 0.50
K
NIST Ludeman, 1940
Tboil
371.55 ± 0.50
K
NIST Manzoni-Ansidei, 1940
Tboil
371.15 ± 1.00
K
NIST Morgan and Yager, 1940
Tboil
371.55 ± 0.50
K
NIST Sivertsev, 1940
Tboil
371.40 ± 0.40
K
NIST Beltz, 1939
Tboil
371.73 ± 0.20
K
NIST Dornte, 1939
Tboil
371.55 ± 0.20
K
NIST Wibaut, Hoog, et al., 1939
Tboil
371.56 ± 0.15
K
NIST Wojciechowski, 1939
Tboil
371.55 ± 0.50
K
NIST Bonino and Manzoni-Ansidei, 1938
Tboil
371.57 ± 0.02
K
NIST Brooks, 1938
Tboil
371.65 ± 1.50
K
NIST Ivanov, 1938
Tboil
371.54 ± 0.15
K
NIST Kay, 1938
Tboil
371.40 ± 1.00
K
NIST Maccormac and Townend, 1938
Tboil
371.55 ± 0.30
K
NIST Smittenberg, Hoog, et al., 1938
Tboil
371.56 ± 0.02
K
NIST Smith and Matheson, 1938
Tboil
371.65 ± 1.50
K
NIST Tishchenko, Belopol'skii, et al., 1938
Tboil
371.67 ± 0.03
K
NIST i Beattie and Kay, 1937
carefully purified, protected from air, Pt Resistance therm.
Tboil
371.55 ± 0.50
K
NIST Grosse, 1937
Tboil
371.67 ± 0.05
K
NIST Smith, Beattie, et al., 1937
Tboil
371.55 ± 0.50
K
NIST Varteressian and Fenske, 1937
Tboil
371.30 ± 0.50
K
NIST Vondracek, 1937
Tboil
371.45 ± 0.50
K
NIST Van Wijk and Versteeg, 1937
Tboil
371.15 ± 0.60
K
NIST Ipatieff and Grosse, 1936
Tboil
Outlier 370.65 ± 0.60
K
NIST i Petrov and Andreev, 1936
Data excluded from overall average
Tboil
Outlier 370.40 ± 0.50
K
NIST i Petrov and Andreev, 1936
Data excluded from overall average
Tboil
371.50 ± 0.20
K
NIST Sherrill and Mollet, 1936
Tboil
371.10 ± 0.60
K
NIST i Slotterbeck, 1936
Data excluded from overall average
Tboil
371.51 ± 0.05
K
NIST Wojciechowski, 1936
Tboil
371.51 ± 0.04
K
NIST Wojciechowski, 1936
Tboil
371.65 ± 1.50
K
NIST Ivanov and Savinova, 1935
Tboil
371.70 ± 0.50
K
NIST Kubo, 1935
Tboil
371.55 ± 0.50
K
NIST Leslie and White, 1935
Tboil
371.40 ± 1.00
K
NIST Orlov, Glinskikh, et al., 1935
Tboil
Outlier 371.00 ± 1.00
K
NIST i Petrov, Meshcheryakov, et al., 1935
Data excluded from overall average
Tboil
371.55 ± 0.30
K
NIST Rossini, 1935
Tboil
371.50 ± 0.20
K
NIST Timmermans and Hennaut-Roland, 1935
Tboil
371.55 ± 0.30
K
NIST Carr and Stucklen, 1934
Tboil
371.15 ± 1.00
K
NIST Kao and Chang, 1934
Tboil
371.60 ± 0.30
K
NIST Kohlraush and Koppl, 1934
Tboil
371.30 ± 1.00
K
NIST Orlov and Ivanov, 1934
Tboil
371.65 ± 1.00
K
NIST Orlov, 1934
Tboil
371.45 ± 0.15
K
NIST Smyth and McAlpine, 1934
Tboil
371.55 ± 0.30
K
NIST Bromiley and Quiggle, 1933
Tboil
371.55 ± 0.50
K
NIST Soday and Boord, 1933
Tboil
371.15 ± 0.50
K
NIST Waterman and de Kok, 1933
Tboil
371.55 ± 0.30
K
NIST Hicks-Brunn and Bruun, 1932
Tboil
371.55 ± 0.20
K
NIST Hicks-Brunn and Bruun, 1932
Tboil
371.55 ± 0.20
K
NIST Hicks-Brunn and Bruun, 1932
Tboil
371.53 ± 0.10
K
NIST Mair, 1932
Tboil
371.50 ± 0.15
K
NIST Richards and Wallace, 1932
Tboil
371.55 ± 0.30
K
NIST Tongberg and Fenske, 1932
Tboil
371.55 ± 0.30
K
NIST Tongberg, Pickens, et al., 1932
Tboil
371.55 ± 0.50
K
NIST Kolossowsky and Udovenko, 1931
Tboil
371.53 ± 0.10
K
NIST Shepard, Henne, et al., 1931
Tboil
371.60 ± 0.20
K
NIST Lecat, 1930
Tboil
371.55 ± 0.30
K
NIST McKee and Szayna, 1930
Tboil
371.55 ± 0.30
K
NIST Tanaka and Tsuji, 1930
Tboil
371.55 ± 0.30
K
NIST Edgar, Calingaert, et al., 1929
Tboil
371.55 ± 0.30
K
NIST Edgar and Calingaert, 1929
Tboil
371.55 ± 0.20
K
NIST Smyth and Engel, 1929
Tboil
371.55 ± 0.30
K
NIST Carpenter, 1928
Tboil
371.55 ± 0.50
K
NIST Dice and Hildebrand, 1928
Tboil
371.45 ± 0.30
K
NIST Weber and Dunlap, 1928
Tboil
371.65 ± 0.60
K
NIST Brame and Hunter, 1927
Tboil
371.45 ± 0.30
K
NIST Brame and Hunter, 1927
Tboil
371.15 ± 0.30
K
NIST Brame and Hunter, 1927
Tboil
371.55 ± 0.50
K
NIST Calingaert and Hitchcock, 1927
Tboil
371.60 ± 0.50
K
NIST Lecat, 1927
Tboil
371.60 ± 0.20
K
NIST Lecat, 1927, 2
Tboil
371.55 ± 0.30
K
NIST Carpenter, 1926
Tboil
371.60 ± 0.50
K
NIST Lecat, 1926
Tboil
371.60 ± 0.20
K
NIST Lecat, 1926, 2
Tboil
371.71 ± 0.20
K
NIST Mathews, 1926
Tboil
371.35 ± 0.50
K
NIST Schuster, 1926
Tboil
371.90 ± 1.50
K
NIST Dupont, 1924
Tboil
371.46 ± 0.25
K
NIST Williams and Daniels, 1924
Tboil
371.65 ± 0.50
K
NIST Ormandy and Craven, 1923
Tboil
371.70 ± 5.00
K
NIST Faragher and Garner, 1921
Tboil
371.55 ± 0.20
K
NIST Timmermans, 1921
Tboil
371.55 ± 0.50
K
NIST Hildebrand and Jenks, 1920
Tboil
371.49 ± 0.30
K
NIST Sherk, 1920
Tboil
371.30 ± 0.80
K
NIST Chavanne and Simon, 1919
Tboil
371.30 ± 1.00
K
NIST Chavanne and Simon, 1919, 2
Tboil
371.65 ± 1.50
K
NIST Lagerlof, 1918
Tboil
371.45 ± 1.50
K
NIST Scheppo, 1913
Tboil
371.15 ± 1.00
K
NIST Von Braun and Sobecki, 1911
Tboil
371.15 ± 2.00
K
NIST Engler and Halmai, 1910
Tboil
371.90 ± 1.50
K
NIST Sabatier and Senderens, 1905
Tboil
371.60 ± 0.30
K
NIST Young, 1899
Tboil
371.50 ± 0.40
K
NIST Francis and Young, 1898
Tboil
371.59 ± 0.50
K
NIST Young, 1898
Tboil
371.55 ± 1.00
K
NIST Thorpe and Rodger, 1894
Tboil
371.55 ± 1.00
K
NIST Perkin, 1885
Tboil
371.58 ± 1.00
K
NIST Thorpe, 1879
Tboil
371.57 ± 1.00
K
NIST Thorpe, 1879
Tboil
371.15 ± 2.00
K
NIST Schorlemmer, 1872
Tboil
371.65 ± 2.00
K
NIST Dale, 1864
Tboil
371.65 ± 2.00
K
NIST Schorlemmer, 1863
Tboil
371.15 ± 2.00
K
NIST Schorlemmer, 1863, 2
Tc
[536.70; 542.70]
K
Tc
540.10
K
Measurement of critical properties for binary and ternary mixtures containing potential gasoline additive diethyl carbonate (DEC)
Tc
540.00
K
Measurement of critical temperatures and critical pressures for binary mixtures of methyl tert-butyl ether (MTBE) + alcohol and MTBE + alkane
Tc
540.00
K
Measurement and correlation of critical properties for binary mixtures and ternary mixtures containing gasoline additives
Tc
540.14
K
Experimental determination of critical data of multi-component mixtures containing potential gasoline additives 2-butanol by a flow-type apparatus
Tc
540.60
K
The Critical Temperatures of a Number of (i) (Chloroalkane (C3 C4) + Hydrocarbon (C6 C7)) Binary Mixtures and (ii) (Aromatic Halocarbon (Chlorobenzene, Fluorobenzene, 1,2-Dichlorobenzene, or 1,3-Dichlorobenzene) + Alkane (C8)) Binary Mixtures
Tc
540.10
K
Measurement of Critical Properties for Binary and Ternary Mixtures Containing n-Butanol and n-Alkane
Tc
540.14
K
Determination of the Critical Properties of C6 C10 n-Alkanes and Their Binary Systems Using a Flow Apparatus
Tc
540.20
K
IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 2 Compiled value
Tc
540.30
K
PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Tc
540.26
K
Passut and Danner (1973), critical constants and acentric factors Compiled value
Tc
540.20
K
ChemSep v8.3 pure component data Compiled value
Tc
540.20
K
KDB
Tc
540.20 ± 0.30
K
NIST Ambrose and Tsonopoulos, 1995
Tc
Outlier 536.80 ± 2.00
K
NIST Nikitin, Pavlov, et al., 1994
Tc
Outlier 536.70 ± 4.00
K
NIST Nikitin, Pavlov, et al., 1993
Tc
540.00 ± 1.00
K
NIST Steele, 1992
Tc
540.40 ± 0.40
K
NIST Quadri, Khilar, et al., 1991
Tc
539.80 ± 0.30
K
NIST Anselme, Gude, et al., 1990
Tc
540.30
K
NIST i Rosenthal and Teja, 1989
this temperature used to calibrate the thermocouple
Tc
540.10
K
NIST Teja, Lee, et al., 1989
Tc
540.17 ± 0.10
K
NIST i Brunner, 1988
Visual, optical cell 30cm high. TE cal. vs PRT
Tc
540.20
K
NIST Majer and Svoboda, 1985
Tc
540.68 ± 0.08
K
NIST i Zawisza and Vejrosta, 1982
Visual, PRT, IPTS-68
Tc
540.20 ± 0.30
K
NIST Young, 1975
Tc
539.86 ± 0.07
K
NIST Artyukhovskaya, Shimanskaya, et al., 1974
Tc
539.90 ± 0.30
K
NIST Young, 1974
Tc
Outlier 542.70 ± 0.70
K
NIST Raetzsch and Strauch, 1972
Tc
541.00 ± 0.50
K
NIST Kobe and Mathews, 1970
Tc
540.00 ± 0.30
K
NIST Kreglewski and Kay, 1969
Tc
540.00 ± 0.40
K
NIST McMicking and Kay, 1965
Tc
540.60 ± 0.40
K
NIST Kay, 1964
Tc
540.28 ± 0.20
K
NIST i Ambrose, Cox, et al., 1960
Visual, PRT, IPTS-48
Tc
540.30 ± 0.33
K
NIST Kobe, Crawford, et al., 1955
Tc
540.53 ± 0.27
K
NIST Kay, 1941
Tc
540.50 ± 0.55
K
NIST Kay, 1938
Tc
540.16 ± 0.05
K
NIST i Beattie and Kay, 1937
based on pvt isotherms
Tc
540.16 ± 0.06
K
NIST Smith, Beattie, et al., 1937
Tc
Outlier 542.65 ± 0.50
K
NIST i Edgar and Calingaert, 1929
measured by Keys and Kleinschmidt
Tc
540.00 ± 1.00
K
NIST Young, 1910
Tfus
[176.05; 183.15]
K
Tfus
182.15
K
Jean-Claude Bradley Open Melting Point Dataset (2014, CC0) Compiled value
Tfus
182.57
K
ChemSep v8.3 pure component data Compiled value
Tfus
182.50
K
KDB
Tfus
182.31
K
Aq. Solubility Prediction
Tfus
182.57
K
NCMS SOLV-DB
Tfus
182.55 ± 0.20
K
NIST Guieu, Faradjzadeh, et al., 1980
Tfus
182.55 ± 0.20
K
NIST Guieu, Faradjzadeh, et al., 1980, 2
Tfus
182.55 ± 0.20
K
NIST Guieu, Faradjzadeh, et al., 1980, 3
Tfus
182.55 ± 0.20
K
NIST Guieu, Faradjzadeh, et al., 1980, 4
Tfus
182.57 ± 0.10
K
NIST Ait-Kaci and Merlin, 1979
Tfus
182.58 ± 0.05
K
NIST i Holzhauer and Ziegler, 1975
IPTS-68
Tfus
182.55 ± 0.02
K
NIST i Carruth and Kobayashi, 1973
IPTS-48
Tfus
182.56 ± 0.05
K
NIST Oetting, 1963
Tfus
183.15 ± 2.00
K
NIST Hollo, Lengyel, et al., 1958
Tfus
182.12 ± 0.20
K
NIST Neff and Hickman, 1955
Tfus
182.54 ± 0.03
K
NIST Pomerantz, 1952
Tfus
182.54 ± 0.02
K
NIST Pomerantz, 1952
Tfus
182.65 ± 0.40
K
NIST Timmermans, 1952
Tfus
182.54 ± 0.05
K
NIST Anonymous, 1951
Tfus
182.54 ± 0.03
K
NIST Anonymous, 1951
Tfus
182.50 ± 0.06
K
NIST Anonymous, 1951
Tfus
182.54 ± 0.03
K
NIST Anonymous, 1951
Tfus
182.49 ± 0.08
K
NIST Doolittle and Peterson, 1951
Tfus
182.45 ± 0.20
K
NIST Tilicheev, Peshkov, et al., 1951
Tfus
182.53 ± 0.02
K
NIST Anonymous, 1949
Tfus
182.54 ± 0.01
K
NIST Anonymous, 1949
Tfus
182.45 ± 0.15
K
NIST Denyer, Fidler, et al., 1949
Tfus
182.45 ± 0.30
K
NIST Giller and Drickamer, 1949
Tfus
182.50 ± 0.15
K
NIST Appleby, Avery, et al., 1947
Tfus
182.55 ± 0.20
K
NIST Anonymous, 1946
Tfus
182.54 ± 0.01
K
NIST Forziati, Glasgow, et al., 1946
Tfus
182.54 ± 0.03
K
NIST Glasgow, Murphy, et al., 1946
Tfus
182.54 ± 0.02
K
NIST Glasgow, Murphy, et al., 1946
Tfus
182.49 ± 0.15
K
NIST Anonymous, 1944
Tfus
182.51 ± 0.20
K
NIST Rank, Scott, et al., 1942
Tfus
182.55 ± 0.20
K
NIST Anonymous, 1941
Tfus
183.15 ± 1.50
K
NIST Campbell and Eby, 1941
Tfus
182.47 ± 0.20
K
NIST Jones and Starr, 1941
Tfus
182.55 ± 0.07
K
NIST Brooks, Howard, et al., 1940
Tfus
182.35 ± 0.30
K
NIST Wibaut, Hoog, et al., 1939
Tfus
182.57 ± 0.08
K
NIST Brooks, 1938
Tfus
182.35 ± 0.40
K
NIST Smittenberg, Hoog, et al., 1938
Tfus
183.15 ± 2.00
K
NIST Leslie and Heuer, 1937
Tfus
183.15 ± 1.50
K
NIST Timmermans and Hennaut-Roland, 1935
Tfus
182.34 ± 0.30
K
NIST Hicks-Brunn and Bruun, 1932
Tfus
182.53 ± 0.15
K
NIST Hicks-Brunn and Bruun, 1932
Tfus
182.49 ± 0.20
K
NIST Hicks-Brunn and Bruun, 1932
Tfus
182.53 ± 0.10
K
NIST Mair, 1932
Tfus
181.95 ± 1.00
K
NIST Tongberg and Fenske, 1932
Tfus
182.45 ± 0.50
K
NIST Tongberg, Pickens, et al., 1932
Tfus
182.55 ± 0.40
K
NIST Parks and Huffman, 1931
Tfus
182.50 ± 0.08
K
NIST Shepard, Henne, et al., 1931
Tfus
182.65 ± 0.50
K
NIST Edgar, Calingaert, et al., 1929
Tfus
182.65 ± 0.50
K
NIST Edgar and Calingaert, 1929
Tfus
182.65 ± 0.40
K
NIST Smyth and Engel, 1929
Tfus
183.15 ± 0.30
K
NIST Timmermans, 1921
Tfus
Outlier 176.05 ± 1.00
K
NIST i Timmermans, 1911
Data excluded from overall average
Ttriple
[182.20; 187.57]
K
Ttriple
182.55
K
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Ttriple
182.57
K
Staveley, Lobo and Calado (1981), triple points Compiled value
Ttriple
182.57
K
ChemSep v8.3 pure component data Compiled value
Ttriple
182.55
K
KDB
Ttriple
183.20 ± 0.10
K
NIST i Knauth and Sabbah, 1990
Data excluded from overall average
Ttriple
182.57 ± 0.05
K
NIST van Miltenburg, Van Den Berg, et al., 1987
Ttriple
182.59 ± 0.06
K
NIST i Brown and Ziegler, 1979
on IPTS-68. Measured in calorimeter, presumably in absence of air.
Ttriple
182.59 ± 0.02
K
NIST Schaake, Offringa, et al., 1979
Ttriple
182.70 ± 0.20
K
NIST i Meijer, Blok, et al., 1977
Data excluded from overall average
Ttriple
182.56 ± 0.05
K
NIST van Miltenburg, 1972
Ttriple
182.55 ± 0.03
K
NIST Messerly, Guthrie, et al., 1967
Ttriple
182.55 ± 0.05
K
NIST Huffman, Gross, et al., 1961
Ttriple
182.55 ± 0.03
K
NIST i McCullough and Messerly, 1961
Value measured in 1947, temp. scale not identified
Ttriple
182.56 ± 0.04
K
NIST i McCullough and Messerly, 1961
value measured in 1949, presumably IPTS-48
Ttriple
182.56 ± 0.04
K
NIST i McCullough and Messerly, 1961
value measure in 1951, presumably IPTS-48
Ttriple
182.55 ± 0.04
K
NIST i McCullough and Messerly, 1961
value measured in 1951, presambly IPTS-48
Ttriple
182.55 ± 0.02
K
NIST i McCullough and Messerly, 1961
value measured in 1954, corrected to NBS-55 temp. scale
Ttriple
182.55 ± 0.01
K
NIST i McCullough and Messerly, 1961
selected value based on data for samples 1-5, NBS-55 scale
Ttriple
182.53 ± 0.04
K
NIST Anonymous, 1959
Ttriple
182.53 ± 0.02
K
NIST Anonymous, 1959
Ttriple
182.56 ± 0.00
K
NIST Pilcher, 1957
Ttriple
182.56 ± 0.01
K
NIST i Douglas, Furukawa, et al., 1954
by extrapolation of 1/f to 0
Ttriple
182.56 ± 0.01
K
NIST Ginnings and Furukawa, 1953
Ttriple
182.55 ± 0.02
K
NIST Waddington, 1952
Ttriple
182.56 ± 0.02
K
NIST Waddington, 1952
Ttriple
182.55 ± 0.04
K
NIST Waddington, 1952
Ttriple
182.55 ± 0.02
K
NIST Waddington, 1952
Ttriple
182.56 ± 0.20
K
NIST Waddington, 1950
Ttriple
182.56 ± 0.20
K
NIST Waddington, 1950
Ttriple
182.56 ± 0.05
K
NIST Huffman, 1949
Ttriple
182.56 ± 0.03
K
NIST Huffman, 1949
Ttriple
183.56 ± 0.06
K
NIST i Huffman, 1948
Data excluded from overall average
Ttriple
Outlier 187.57 ± 0.03
K
NIST i Huffman, 1948
Data excluded from overall average
Ttriple
182.20 ± 0.20
K
NIST i Huffman, Parks, et al., 1930
Data excluded from overall average
Ttriple
182.60 ± 0.20
K
NIST Parks, Huffman, et al., 1930
UQi
4.40
ChemSep v8.3 pure component data Compiled value
URi
5.17
ChemSep v8.3 pure component data Compiled value
Vc
[0.425; 0.432]
m3 /kmol
Vc
0.428
m3 /kmol
IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 2 Compiled value
Vc
0.432
m3 /kmol
PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Vc
0.428
m3 /kmol
ChemSep v8.3 pure component data Compiled value
Vc
0.428
m3 /kmol
KDB
Vc
0.428
m3 /kmol
NIST Ambrose and Tsonopoulos, 1995
Vc
0.425 ± 0.001
m3 /kmol
NIST i Zawisza and Vejrosta, 1982
Visual
Vm
[1.47e-04; 1.47e-04]
m3 /mol
Vm
1.47e-04
m3 /mol
Thermodynamic study of (heptane + amine) mixtures. II. Excess and partial molar volumes at 298.15 K i
Standard Ambient Temperature and Pressure (SATP)
Vm
1.47e-04
m3 /mol
Thermodynamic Study of Heptane + Silicone Mixtures. Excess Volumes and Enthalpies at 298.15 K i
Standard Ambient Temperature and Pressure (SATP)
VCOSTALD
0.43
m3 /kmol
Hankinson and Thomson (1979), COSTALD parameters Compiled value
ωSRK
0.35
Hankinson and Thomson (1979), COSTALD parameters Compiled value
Zc
[0.2610000; 0.2610980]
Zc
0.2610000
IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 2 Compiled value
Zc
0.2610000
ChemSep v8.3 pure component data Compiled value
Zc
0.2610980
KDB
Zra
[0.26; 0.26]
Zra
0.26
Hankinson and Thomson (1979), COSTALD parameters Compiled value
Zra
0.26
ChemSep v8.3 pure component data Compiled value
Zra
0.26
KDB
Property
Value
Unit
Temperature (K)
Source
Cp,gas
[191.50; 238.49]
J/mol×K
[357.10; 466.10]
Cp,gas
191.50 ± 0.19
J/mol×K
357.10
NIST Waddington G., 1947
Cp,gas
198.78 ± 0.20
J/mol×K
373.15
NIST
Cp,gas
210.75 ± 0.21
J/mol×K
400.40
NIST
Cp,gas
225.31 ± 0.23
J/mol×K
434.35
NIST
Cp,gas
238.49 ± 0.24
J/mol×K
466.10
NIST
Cp,liquid
[201.34; 328.61]
J/mol×K
[190.00; 480.00]
Cp,liquid
201.82
J/mol×K
190.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
201.34
J/mol×K
200.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
201.69
J/mol×K
210.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
202.75
J/mol×K
220.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
201.51
J/mol×K
228.15
Isobaric Heat Capacity Measurements of Liquid Methane, Ethane, and Propane by Differential Scanning Calorimetry at High Pressures and Low Temperatures
Cp,liquid
202.31
J/mol×K
228.15
Isobaric Heat Capacity Measurements of Liquid Methane, Ethane, and Propane by Differential Scanning Calorimetry at High Pressures and Low Temperatures
Cp,liquid
204.43
J/mol×K
230.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
206.22
J/mol×K
238.15
Isobaric Heat Capacity Measurements of Liquid Methane, Ethane, and Propane by Differential Scanning Calorimetry at High Pressures and Low Temperatures
Cp,liquid
205.11
J/mol×K
238.15
Isobaric Heat Capacity Measurements of Liquid Methane, Ethane, and Propane by Differential Scanning Calorimetry at High Pressures and Low Temperatures
Cp,liquid
206.62
J/mol×K
240.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
209.20
J/mol×K
250.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
209.60
J/mol×K
250.00
NIST i Van Miltenburg, 1972
T = 130 to 263 K.
Cp,liquid
212.09
J/mol×K
260.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
215.19
J/mol×K
270.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
216.21
J/mol×K
273.15
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
218.47
J/mol×K
280.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
220.00
J/mol×K
285.00
NIST i Schaake, Offringa, et al., 1979
T = 90 to 285 K.
Cp,liquid
221.93
J/mol×K
290.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
222.88
J/mol×K
293.15
NIST i Kalali, Kohler, et al., 1987
T = 293.15, 313.15 K.
Cp,liquid
222.87
J/mol×K
293.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
223.23
J/mol×K
294.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
223.60
J/mol×K
295.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
223.97
J/mol×K
296.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
224.60
J/mol×K
296.50
NIST i Pitzer K.S., 1940
T = 15 to 318 K. Value is unsmoothed experimental datum.
Cp,liquid
224.35
J/mol×K
297.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
224.62
J/mol×K
297.86
NIST i Kalinowska, Jedlinska, et al., 1980
T = 185 to 300 K. Unsmoothed experimental datum.
Cp,liquid
224.00
J/mol×K
298.00
NIST i Zaripov, 1982
T = 298, 323, 363 K.
Cp,liquid
223.40
J/mol×K
298.00
NIST i Grigor'ev, Rastorguev, et al., 1975
T = 300 to 463 K.
Cp,liquid
211.30
J/mol×K
298.00
NIST Bykov, 1939
Cp,liquid
223.00
J/mol×K
298.00
NIST i Vold, 1937
Cp given as 0.532 cal/g*K.
Cp,liquid
224.30
J/mol×K
298.10
NIST i Richards and Wallace, 1932
T = 293 to 323 K.
Cp,liquid
224.73
J/mol×K
298.15
NIST Shiohama, Ogawa, et al., 1988
Cp,liquid
224.78
J/mol×K
298.15
NIST Lainez, Rodrigo, et al., 1985
Cp,liquid
224.60
J/mol×K
298.15
NIST Grolier, Hamedi, et al., 1979
Cp,liquid
224.66
J/mol×K
298.15
NIST i Brown and Ziegler, 1979
T = 183 to 302 K. Results as equation only.
Cp,liquid
224.69
J/mol×K
298.15
NIST Grolier, Inglese, et al., 1981
Cp,liquid
224.80
J/mol×K
298.15
NIST Tanaka, 1982
Cp,liquid
224.76
J/mol×K
298.15
NIST Kimura, Treszczanowicz, et al., 1983
Cp,liquid
224.78
J/mol×K
298.15
NIST Roux, Grolier, et al., 1984
Cp,liquid
224.72
J/mol×K
298.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
224.71
J/mol×K
298.15
NIST Grolier, Inglese, et al., 1984
Cp,liquid
224.73
J/mol×K
298.15
NIST Tanaka, Nakamichi, et al., 1985
Cp,liquid
255.00
J/mol×K
298.15
NIST i Meijer, Blok, et al., 1977
T = 160 to 350 K.
Cp,liquid
224.89
J/mol×K
298.15
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
224.78
J/mol×K
298.15
NIST Baluja, Bravo, et al., 1985
Cp,liquid
224.71
J/mol×K
298.15
NIST Wilhelm, Inglese, et al., 1987
Cp,liquid
224.72
J/mol×K
298.15
NIST Tanaka, 1987
Cp,liquid
224.72
J/mol×K
298.15
NIST Saito and Tanaka, 1988
Cp,liquid
224.64
J/mol×K
298.15
NIST Andreoli-Ball, Patterson, et al., 1988
Cp,liquid
224.85
J/mol×K
298.15
NIST i Osborne and Ginnings, 1947
T = 278 to 318 K.
Cp,liquid
224.74
J/mol×K
298.15
NIST i Ginnings and Furukawa, 1953
T = 25 to 520 K.
Cp,liquid
224.74
J/mol×K
298.15
NIST i Douglas, Furukawa, et al., 1954
T = 20 to 520 K.
Cp,liquid
224.71
J/mol×K
298.15
NIST Fortier and Benson, 1976
Cp,liquid
224.93
J/mol×K
298.15
NIST i McCullough and Messerly, 1961
T = 10 to 370 K. Csat(liq) = 56.582 - 0.14490T + 5.7813x10-4T2 - 4.1667x10-7T3 cal/mol*K.
Cp,liquid
224.93
J/mol×K
298.15
NIST i Huffman, Gross, et al., 1961
T = 10 to 300 K.
Cp,liquid
328.61
J/mol×K
298.15
NIST Oetting F.L., 1963
Cp,liquid
224.19
J/mol×K
298.15
NIST i Holzhauer and Ziegler, 1975
T = 182 to 312 K. Cp = 866.18820 - 9.9628490T + 0.054561085T2 - 0.00013079634T3 + 1.1957392x10-7T4 J/mol*K.
Cp,liquid
226.53
J/mol×K
298.15
NIST Kalinowska and Woycicka, 1973
Cp,liquid
225.30
J/mol×K
298.15
NIST i Diaz pena and Renuncio, 1974
T = 298 to 323 K.
Cp,liquid
225.10
J/mol×K
299.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
222.20
J/mol×K
299.20
NIST i Parks, Huffman, et al., 1930
T = 90 to 300 K. Value is unsmoothed experimental datum.
Cp,liquid
233.13
J/mol×K
299.80
NIST i Helfrey, Heiser, et al., 1955
T = 70 to 220 F.
Cp,liquid
225.60
J/mol×K
300.00
NIST Czarnota, 1979
Cp,liquid
225.33
J/mol×K
300.00
NIST i Tan, Zhou, et al., 1983
T = 220 to 380 K.
Cp,liquid
225.14
J/mol×K
300.00
NIST i Van Miltenburg, Van den Berg, et al., 1987
T = 10 to 350 K.
Cp,liquid
225.58
J/mol×K
300.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
225.47
J/mol×K
300.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
210.90
J/mol×K
300.80
NIST Phillip, 1939
Cp,liquid
225.87
J/mol×K
301.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
226.22
J/mol×K
302.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
217.00
J/mol×K
303.00
NIST i Willams and Daniels, 1924
T = 303 to 350 K. Equation only.
Cp,liquid
225.96
J/mol×K
303.15
Isobaric Heat Capacity Measurements of Liquid Methane, Ethane, and Propane by Differential Scanning Calorimetry at High Pressures and Low Temperatures
Cp,liquid
226.53
J/mol×K
303.15
NIST Woycicka and Kalinowska, 1975
Cp,liquid
226.61
J/mol×K
303.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
225.25
J/mol×K
303.15
Isobaric Heat Capacity Measurements of Liquid Methane, Ethane, and Propane by Differential Scanning Calorimetry at High Pressures and Low Temperatures
Cp,liquid
227.00
J/mol×K
304.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
227.40
J/mol×K
305.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
227.75
J/mol×K
306.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
228.14
J/mol×K
307.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
228.54
J/mol×K
308.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
228.95
J/mol×K
309.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
229.39
J/mol×K
310.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
229.30
J/mol×K
310.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
229.71
J/mol×K
311.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
230.11
J/mol×K
312.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
229.16
J/mol×K
313.15
Isobaric Heat Capacity Measurements of Liquid Methane, Ethane, and Propane by Differential Scanning Calorimetry at High Pressures and Low Temperatures
Cp,liquid
230.51
J/mol×K
313.15
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
Cp,liquid
230.87
J/mol×K
313.15
Isobaric Heat Capacity Measurements of Liquid Methane, Ethane, and Propane by Differential Scanning Calorimetry at High Pressures and Low Temperatures
Cp,liquid
230.37
J/mol×K
313.15
Heat Capacities of Binary Mixtures of Acetic Acid with Acetic Anhydride and Methenamine at Different Temperatures
Cp,liquid
233.38
J/mol×K
320.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
237.53
J/mol×K
330.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
247.30
J/mol×K
332.00
NIST i Swietoslawski and Zielenkiewicz, 1958
Mean value 22 to 96 C.
Cp,liquid
240.03
J/mol×K
333.15
Heat Capacities of Binary Mixtures of Acetic Acid with Acetic Anhydride and Methenamine at Different Temperatures
Cp,liquid
226.50
J/mol×K
333.15
NIST Woycicka and Kalinowska, 1978
Cp,liquid
241.85
J/mol×K
340.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
246.32
J/mol×K
350.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
250.94
J/mol×K
360.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
255.71
J/mol×K
370.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
260.62
J/mol×K
380.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
265.68
J/mol×K
390.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
270.87
J/mol×K
400.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
276.20
J/mol×K
410.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
281.80
J/mol×K
420.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
287.60
J/mol×K
430.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
293.80
J/mol×K
440.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
300.50
J/mol×K
450.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
307.80
J/mol×K
460.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
315.70
J/mol×K
470.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Cp,liquid
324.30
J/mol×K
480.00
Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD i
Zabransky Mono-6 group 11-021
Csat
[2.17; 246.44]
J/mol×K
[10.22; 350.00]
Csat
2.17
J/mol×K
10.22
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
2.40
J/mol×K
10.56
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
2.63
J/mol×K
10.90
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
3.03
J/mol×K
11.46
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
3.30
J/mol×K
11.82
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
3.75
J/mol×K
12.38
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
4.04
J/mol×K
12.74
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
4.54
J/mol×K
13.31
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
4.88
J/mol×K
13.67
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
5.43
J/mol×K
14.24
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
5.81
J/mol×K
14.61
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
6.20
J/mol×K
15.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
6.40
J/mol×K
15.19
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
6.78
J/mol×K
15.56
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
7.38
J/mol×K
16.14
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
7.77
J/mol×K
16.51
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
8.42
J/mol×K
17.10
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
8.88
J/mol×K
17.48
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
9.58
J/mol×K
18.06
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
10.02
J/mol×K
18.44
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
10.75
J/mol×K
19.03
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
11.21
J/mol×K
19.41
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
11.94
J/mol×K
20.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
11.95
J/mol×K
20.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
12.42
J/mol×K
20.38
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
13.84
J/mol×K
21.47
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
14.31
J/mol×K
21.86
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
16.38
J/mol×K
23.45
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
16.83
J/mol×K
23.84
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
18.47
J/mol×K
25.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
19.07
J/mol×K
25.45
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
19.59
J/mol×K
25.83
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
21.85
J/mol×K
27.45
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
22.39
J/mol×K
27.83
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
24.58
J/mol×K
29.46
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
25.06
J/mol×K
29.84
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
25.29
J/mol×K
30.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
27.24
J/mol×K
31.48
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
27.71
J/mol×K
31.86
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
29.87
J/mol×K
33.50
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
30.38
J/mol×K
33.88
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
31.88
J/mol×K
35.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
32.48
J/mol×K
35.52
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
32.95
J/mol×K
35.89
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
35.12
J/mol×K
37.53
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
35.21
J/mol×K
37.64
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
35.16
J/mol×K
37.64
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
35.56
J/mol×K
37.90
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
37.35
J/mol×K
39.31
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
37.30
J/mol×K
39.32
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
37.65
J/mol×K
39.55
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
38.14
J/mol×K
39.91
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
38.15
J/mol×K
40.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
39.81
J/mol×K
41.31
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
39.82
J/mol×K
41.31
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
42.24
J/mol×K
43.32
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
42.24
J/mol×K
43.32
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
44.15
J/mol×K
45.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
44.56
J/mol×K
45.32
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
44.53
J/mol×K
45.32
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
46.84
J/mol×K
47.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
46.77
J/mol×K
47.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
49.07
J/mol×K
49.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
49.07
J/mol×K
49.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
49.96
J/mol×K
50.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
51.46
J/mol×K
51.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
51.44
J/mol×K
51.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
53.91
J/mol×K
53.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
53.80
J/mol×K
53.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
55.67
J/mol×K
55.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
56.10
J/mol×K
55.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
56.15
J/mol×K
55.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
58.35
J/mol×K
57.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
58.36
J/mol×K
57.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
60.02
J/mol×K
59.34
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
60.02
J/mol×K
59.34
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
60.99
J/mol×K
60.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
62.32
J/mol×K
61.34
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
62.35
J/mol×K
61.34
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
64.30
J/mol×K
63.32
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
64.33
J/mol×K
63.32
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
65.82
J/mol×K
65.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
66.05
J/mol×K
65.25
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
66.06
J/mol×K
65.25
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
67.76
J/mol×K
67.11
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
67.69
J/mol×K
67.11
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
69.20
J/mol×K
68.91
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
69.22
J/mol×K
68.91
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
70.06
J/mol×K
70.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
70.53
J/mol×K
70.66
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
70.51
J/mol×K
70.66
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
72.31
J/mol×K
73.03
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
72.30
J/mol×K
73.03
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
73.90
J/mol×K
75.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
74.71
J/mol×K
76.06
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
74.71
J/mol×K
76.06
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
77.17
J/mol×K
79.10
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
77.16
J/mol×K
79.10
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
77.37
J/mol×K
79.20
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
77.94
J/mol×K
80.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
79.65
J/mol×K
81.98
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
79.60
J/mol×K
82.14
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
81.77
J/mol×K
84.69
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
82.01
J/mol×K
85.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
83.89
J/mol×K
87.43
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
85.98
J/mol×K
90.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
86.28
J/mol×K
90.17
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
88.27
J/mol×K
92.93
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
89.74
J/mol×K
95.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
90.18
J/mol×K
95.71
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
92.07
J/mol×K
98.50
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
93.14
J/mol×K
100.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
93.89
J/mol×K
101.31
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
95.70
J/mol×K
104.14
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
96.27
J/mol×K
105.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
97.53
J/mol×K
106.99
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
99.32
J/mol×K
109.86
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
99.41
J/mol×K
110.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
101.17
J/mol×K
112.75
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
102.48
J/mol×K
115.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
102.94
J/mol×K
115.67
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
104.61
J/mol×K
118.61
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
105.51
J/mol×K
120.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
106.38
J/mol×K
121.58
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
108.16
J/mol×K
124.59
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
108.52
J/mol×K
125.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
110.13
J/mol×K
127.62
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
111.53
J/mol×K
130.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
112.09
J/mol×K
130.69
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
113.81
J/mol×K
133.80
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
114.56
J/mol×K
135.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
115.73
J/mol×K
136.95
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
117.65
J/mol×K
140.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
117.73
J/mol×K
140.14
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
119.78
J/mol×K
143.40
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
120.81
J/mol×K
145.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
122.03
J/mol×K
146.71
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
124.06
J/mol×K
150.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
124.36
J/mol×K
150.10
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
126.88
J/mol×K
153.56
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
127.42
J/mol×K
155.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
129.66
J/mol×K
157.10
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
130.93
J/mol×K
160.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
133.00
J/mol×K
160.75
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
137.16
J/mol×K
164.44
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
134.60
J/mol×K
165.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
138.45
J/mol×K
170.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
142.51
J/mol×K
175.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
146.80
J/mol×K
180.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
202.36
J/mol×K
182.55
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
149.09
J/mol×K
182.55
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
202.05
J/mol×K
185.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
201.79
J/mol×K
185.57
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
201.99
J/mol×K
188.61
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
201.46
J/mol×K
190.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
201.22
J/mol×K
191.64
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
200.83
J/mol×K
194.68
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
201.01
J/mol×K
195.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
200.98
J/mol×K
197.70
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
200.73
J/mol×K
200.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
200.44
J/mol×K
200.72
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
200.67
J/mol×K
203.73
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
201.07
J/mol×K
206.73
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
200.95
J/mol×K
209.74
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
200.96
J/mol×K
210.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
201.02
J/mol×K
212.74
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
201.78
J/mol×K
215.72
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
202.22
J/mol×K
218.71
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
202.23
J/mol×K
220.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
202.58
J/mol×K
221.69
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
202.99
J/mol×K
224.68
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
203.19
J/mol×K
227.67
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
203.89
J/mol×K
230.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
203.91
J/mol×K
230.64
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
204.56
J/mol×K
233.61
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
205.27
J/mol×K
236.57
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
206.01
J/mol×K
239.53
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
206.00
J/mol×K
240.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
206.57
J/mol×K
242.52
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
207.37
J/mol×K
245.47
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
208.20
J/mol×K
248.40
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
208.61
J/mol×K
250.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
208.99
J/mol×K
251.33
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
209.84
J/mol×K
254.24
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
210.74
J/mol×K
257.15
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
211.55
J/mol×K
260.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
211.57
J/mol×K
260.06
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
212.29
J/mol×K
262.96
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
213.27
J/mol×K
265.84
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
214.39
J/mol×K
268.72
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
214.93
J/mol×K
270.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
215.35
J/mol×K
271.58
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
216.05
J/mol×K
273.15
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
216.56
J/mol×K
274.44
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
217.88
J/mol×K
277.27
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
218.55
J/mol×K
280.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
218.87
J/mol×K
280.10
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
219.83
J/mol×K
282.92
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
220.74
J/mol×K
285.74
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
221.53
J/mol×K
288.63
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
222.27
J/mol×K
290.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
222.72
J/mol×K
291.45
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
223.66
J/mol×K
294.27
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
224.74
J/mol×K
297.09
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
225.25
J/mol×K
298.15
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
225.82
J/mol×K
299.90
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
225.91
J/mol×K
300.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
226.95
J/mol×K
302.72
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
227.96
J/mol×K
305.53
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
229.09
J/mol×K
308.35
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
229.67
J/mol×K
310.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
230.25
J/mol×K
311.17
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
231.30
J/mol×K
313.98
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
232.31
J/mol×K
316.80
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
233.38
J/mol×K
319.62
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
233.56
J/mol×K
320.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
234.49
J/mol×K
322.43
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
235.52
J/mol×K
325.25
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
236.39
J/mol×K
328.07
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
237.62
J/mol×K
330.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
238.00
J/mol×K
330.89
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
239.30
J/mol×K
333.91
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
240.69
J/mol×K
336.75
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
241.87
J/mol×K
339.59
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
241.90
J/mol×K
340.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
243.16
J/mol×K
342.44
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
244.22
J/mol×K
345.29
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
245.37
J/mol×K
348.15
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
Csat
246.44
J/mol×K
350.00
Measurement of Heat Capacity by Adiabatic Calorimetry and Calculation of Thermodynamic Functions of Standard Substances: Copper, Benzoic Acid, and Heptane (For Calibration of an Adiabatic Calorimeter)
η
[0.0002320; 0.0005260]
Pa×s
[273.15; 353.15]
η
0.0005260
Pa×s
273.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
η
0.0004950
Pa×s
278.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
η
0.0004690
Pa×s
283.15
Density, viscosity and excess molar volume of binary mixtures of tri-n-octylamine + diluents (n-heptane, n-octane, n-nonane, and n-decane) at various temperatures
η
0.0004650
Pa×s
283.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
η
0.0004410
Pa×s
288.15
Densities and Viscosities of Binary Mixtures of Tri-n-butyl Phosphate + Cyclohexane, + n-Heptane at T ) (288.15, 293.15, 298.15, 303.15, and 308.15) K
η
0.0004380
Pa×s
288.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
η
0.0004320
Pa×s
288.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0004120
Pa×s
293.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0004200
Pa×s
293.15
Density, viscosity and excess molar volume of binary mixtures of tri-n-octylamine + diluents (n-heptane, n-octane, n-nonane, and n-decane) at various temperatures
η
0.0004100
Pa×s
293.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
η
0.0004210
Pa×s
293.15
Excess Molar Volumes and Viscosities of Binary Systems of Butylcyclohexane with n-Alkanes (C7 to C14) at T = 293.15 K to 313.15 K
η
0.0004120
Pa×s
293.15
Densities and Kinematic Viscosities of a Quinary Regular Liquid System and Its Five Quaternary Subsystems at 293.15A K and 298.15A K
η
0.0004127
Pa×s
293.15
Physical properties of {anisole + n-alkanes} at temperatures between (293.15 and 303.15) K
η
0.0004150
Pa×s
293.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
η
0.0004100
Pa×s
293.15
Comparative experimental and modeling studies of the viscosity behavior of ethanol +C7 hydrocarbon mixtures versus pressure and temperature
η
0.0004038
Pa×s
293.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
η
0.0004142
Pa×s
293.15
Densities and Viscosities of Ternary Mixtures of Heptane, Octane, Nonane, and Hexyl Benzene from 293.15 K to 313.15 K
η
0.0004110
Pa×s
293.15
Viscosities of Dimethyl Carbonate or Diethyl Carbonate with Alkanes at Four Temperatures. New UNIFAC-VISCO Parameters
η
0.0004170
Pa×s
293.15
Densities and Viscosities of Binary Mixtures of Tri-n-butyl Phosphate + Cyclohexane, + n-Heptane at T ) (288.15, 293.15, 298.15, 303.15, and 308.15) K
η
0.0003920
Pa×s
298.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
η
0.0003880
Pa×s
298.15
Viscosities of Dimethyl Carbonate or Diethyl Carbonate with Alkanes at Four Temperatures. New UNIFAC-VISCO Parameters
η
0.0003970
Pa×s
298.15
Density, viscosity and excess molar volume of binary mixtures of tri-n-octylamine + diluents (n-heptane, n-octane, n-nonane, and n-decane) at various temperatures
η
0.0003890
Pa×s
298.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
η
0.0003970
Pa×s
298.15
NCMS SOLV-DB
η
0.0003930
Pa×s
298.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0003980
Pa×s
298.15
Excess Molar Volumes and Viscosities of Binary Systems of Butylcyclohexane with n-Alkanes (C7 to C14) at T = 293.15 K to 313.15 K
η
0.0003895
Pa×s
298.15
Densities and Kinematic Viscosities of a Quinary Regular Liquid System and Its Five Quaternary Subsystems at 293.15A K and 298.15A K
η
0.0004040
Pa×s
298.15
Volumetric and Viscous Properties at Several Temperatures for Binary Mixtures of N-Methylpiperazine with Methylcyclohexane or n-Heptane
η
0.0003909
Pa×s
298.15
Physical properties of {anisole + n-alkanes} at temperatures between (293.15 and 303.15) K
η
0.0003831
Pa×s
298.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
η
0.0003960
Pa×s
298.15
Densities and Viscosities of Binary Mixtures of Tri-n-butyl Phosphate + Cyclohexane, + n-Heptane at T ) (288.15, 293.15, 298.15, 303.15, and 308.15) K
η
0.0003960
Pa×s
298.15
Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K
η
0.0004009
Pa×s
298.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
η
0.0003928
Pa×s
298.15
Densities and Viscosities of Ternary Mixtures of Heptane, Octane, Nonane, and Hexyl Benzene from 293.15 K to 313.15 K
η
0.0003750
Pa×s
303.15
Viscosities of Dimethyl Carbonate or Diethyl Carbonate with Alkanes at Four Temperatures. New UNIFAC-VISCO Parameters
η
0.0003690
Pa×s
303.15
Effect of polarity and temperature on the binary interaction between D2EHPA extractant and organic solvents (kerosene, n-heptane, chlorobenzene and 1-octanol): Experimental and thermodynamics
η
0.0003700
Pa×s
303.15
Viscosities of Dimethyl Carbonate or Diethyl Carbonate with Alkanes at Four Temperatures. New UNIFAC-VISCO Parameters
η
0.0003728
Pa×s
303.15
Densities and Viscosities of Ternary Mixtures of Heptane, Octane, Nonane, and Hexyl Benzene from 293.15 K to 313.15 K
η
0.0003770
Pa×s
303.15
Density, viscosity and excess molar volume of binary mixtures of tri-n-octylamine + diluents (n-heptane, n-octane, n-nonane, and n-decane) at various temperatures
η
0.0003750
Pa×s
303.15
Density, Viscosity, and Speed of Sound of (Methyl Benzoate + Cyclohexane), (Methyl Benzoate + n-Hexane), (Methyl Benzoate + Heptane), and (Methyl Benzoate + Octane) at Temperatures of (303.15, 308.15, and 313.15) K
η
0.0003750
Pa×s
303.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
η
0.0003750
Pa×s
303.15
Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K
η
0.0003780
Pa×s
303.15
Excess Molar Volumes and Viscosities of Binary Systems of Butylcyclohexane with n-Alkanes (C7 to C14) at T = 293.15 K to 313.15 K
η
0.0003720
Pa×s
303.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
η
0.0003680
Pa×s
303.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
η
0.0003770
Pa×s
303.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0003750
Pa×s
303.15
Densities and Viscosities of Binary Mixtures of Tri-n-butyl Phosphate + Cyclohexane, + n-Heptane at T ) (288.15, 293.15, 298.15, 303.15, and 308.15) K
η
0.0003830
Pa×s
303.15
Volumetric and Viscous Properties at Several Temperatures for Binary Mixtures of N-Methylpiperazine with Methylcyclohexane or n-Heptane
η
0.0003702
Pa×s
303.15
Physical properties of {anisole + n-alkanes} at temperatures between (293.15 and 303.15) K
η
0.0003629
Pa×s
303.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
η
0.0003560
Pa×s
308.15
Densities and Viscosities of Binary Mixtures of Tri-n-butyl Phosphate + Cyclohexane, + n-Heptane at T ) (288.15, 293.15, 298.15, 303.15, and 308.15) K
η
0.0003620
Pa×s
308.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0003560
Pa×s
308.15
Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K
η
0.0003500
Pa×s
308.15
Density, Viscosity, and Speed of Sound of (Methyl Benzoate + Cyclohexane), (Methyl Benzoate + n-Hexane), (Methyl Benzoate + Heptane), and (Methyl Benzoate + Octane) at Temperatures of (303.15, 308.15, and 313.15) K
η
0.0003540
Pa×s
308.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
η
0.0003520
Pa×s
308.15
Excess Molar Volumes and Viscosities of Binary Systems of Butylcyclohexane with n-Alkanes (C7 to C14) at T = 293.15 K to 313.15 K
η
0.0003490
Pa×s
308.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
η
0.0003497
Pa×s
308.15
Viscometric and Volumetric Properties of 10 Regular Binary Systems at 308.15 K and 313.15 K
η
0.0003541
Pa×s
308.15
Densities and Viscosities of Ternary Mixtures of Heptane, Octane, Nonane, and Hexyl Benzene from 293.15 K to 313.15 K
η
0.0003480
Pa×s
313.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0003250
Pa×s
313.15
Density, Viscosity, and Speed of Sound of (Methyl Benzoate + Cyclohexane), (Methyl Benzoate + n-Hexane), (Methyl Benzoate + Heptane), and (Methyl Benzoate + Octane) at Temperatures of (303.15, 308.15, and 313.15) K
η
0.0003329
Pa×s
313.15
Viscometric and Volumetric Properties of 10 Regular Binary Systems at 308.15 K and 313.15 K
η
0.0003340
Pa×s
313.15
Viscosities of Dimethyl Carbonate or Diethyl Carbonate with Alkanes at Four Temperatures. New UNIFAC-VISCO Parameters
η
0.0003340
Pa×s
313.15
Effect of polarity and temperature on the binary interaction between D2EHPA extractant and organic solvents (kerosene, n-heptane, chlorobenzene and 1-octanol): Experimental and thermodynamics
η
0.0003420
Pa×s
313.15
Volumetric and Viscous Properties at Several Temperatures for Binary Mixtures of N-Methylpiperazine with Methylcyclohexane or n-Heptane
η
0.0003330
Pa×s
313.15
Comparative experimental and modeling studies of the viscosity behavior of ethanol +C7 hydrocarbon mixtures versus pressure and temperature
η
0.0003274
Pa×s
313.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
η
0.0003373
Pa×s
313.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
η
0.0003374
Pa×s
313.15
Densities and Viscosities of Ternary Mixtures of Heptane, Octane, Nonane, and Hexyl Benzene from 293.15 K to 313.15 K
η
0.0003360
Pa×s
313.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
η
0.0003370
Pa×s
313.15
Excess Molar Volumes and Viscosities of Binary Systems of Butylcyclohexane with n-Alkanes (C7 to C14) at T = 293.15 K to 313.15 K
η
0.0003350
Pa×s
318.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0003150
Pa×s
318.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
η
0.0003240
Pa×s
323.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0003074
Pa×s
323.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
η
0.0003039
Pa×s
323.15
Effect of polarity and temperature on the binary interaction between D2EHPA extractant and organic solvents (kerosene, n-heptane, chlorobenzene and 1-octanol): Experimental and thermodynamics
η
0.0003000
Pa×s
323.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
η
0.0002980
Pa×s
323.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
η
0.0003120
Pa×s
328.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0002840
Pa×s
328.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
η
0.0003020
Pa×s
333.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0002793
Pa×s
333.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
η
0.0002760
Pa×s
333.15
Comparative experimental and modeling studies of the viscosity behavior of ethanol +C7 hydrocarbon mixtures versus pressure and temperature
η
0.0002704
Pa×s
333.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
η
0.0002755
Pa×s
333.15
Effect of polarity and temperature on the binary interaction between D2EHPA extractant and organic solvents (kerosene, n-heptane, chlorobenzene and 1-octanol): Experimental and thermodynamics
η
0.0002710
Pa×s
333.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
η
0.0002930
Pa×s
338.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0002840
Pa×s
343.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
η
0.0002541
Pa×s
343.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
η
0.0002487
Pa×s
343.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
η
0.0002320
Pa×s
353.15
Comparative experimental and modeling studies of the viscosity behavior of ethanol +C7 hydrocarbon mixtures versus pressure and temperature
εr
[1.92; 1.94]
[288.15; 308.15]
εr
1.94
288.15
Permittivity and density of the systems (monoglyme, diglyme, triglyme, or tetraglyme + n-heptane) at several temperatures
εr
1.93
298.15
Permittivity and density of the systems (monoglyme, diglyme, triglyme, or tetraglyme + n-heptane) at several temperatures
εr
1.92
308.15
Permittivity and density of the systems (monoglyme, diglyme, triglyme, or tetraglyme + n-heptane) at several temperatures
Δfus H
[13.99; 14.16]
kJ/mol
[182.20; 182.70]
Δfus H
14.16
kJ/mol
182.20
NIST Parks, Huffman, et al., 1930
Δfus H
14.16
kJ/mol
182.20
NIST Huffman, Parks, et al., 1930
Δfus H
14.04
kJ/mol
182.52
NIST Pitzer K.S., 1940
Δfus H
14.04
kJ/mol
182.55
NIST McCullough and Messerly, 1961
Δfus H
14.04
kJ/mol
182.55
NIST Huffman, Gross, et al., 1961
Δfus H
14.02
kJ/mol
182.56
NIST Douglas, Furukawa, et al., 1954
Δfus H
14.02
kJ/mol
182.56
NIST Ginnings and Furukawa, 1953
Δfus H
14.06
kJ/mol
182.56
NIST Van Miltenburg, 1972
Δfus H
14.03
kJ/mol
182.56
NIST Oetting F.L., 1963
Δfus H
13.99
kJ/mol
182.57
NIST Van Miltenburg, Van den Berg, et al., 1987
Δfus H
14.05
kJ/mol
182.59
NIST Schaake, Offringa, et al., 1979
Δfus H
14.04
kJ/mol
182.60
NIST Domalski and Hearing, 1996
Δfus H
14.04
kJ/mol
182.60
NIST Domalski and Hearing, 1996
Δfus H
14.06
kJ/mol
182.70
NIST Meijer, Blok, et al., 1977
Δsub H
57.90
kJ/mol
183.00
NIST Bondi, 1963
Δvap H
[31.70; 36.72]
kJ/mol
[298.00; 371.60]
Δvap H
36.41
kJ/mol
298.00
Enthalpies of Vaporization and Vapor Pressures of Some Deuterated Hydrocarbons. Liquid-Vapor Pressure Isotope Effects
Δvap H
36.72
kJ/mol
298.00
Enthalpies of Vaporization and Vapor Pressures of Some Deuterated Hydrocarbons. Liquid-Vapor Pressure Isotope Effects
Δvap H
36.55
kJ/mol
298.20
Majer and Svoboda 1985 i Osborne and Ginnings, 1947
Majer and Svoboda 1985, table 1.1.14, p. 79
Δvap H
36.58
kJ/mol
298.20
Majer and Svoboda 1985 i Majer et al., 1979a
Majer and Svoboda 1985, table 1.1.14, p. 79
Δvap H
35.60 ± 0.10
kJ/mol
313.00
NIST Majer, Svoboda, et al., 1979
Δvap H
35.63
kJ/mol
313.20
Majer and Svoboda 1985 i Majer et al., 1979a
Majer and Svoboda 1985, table 1.1.14, p. 79
Δvap H
36.10
kJ/mol
318.00
NIST Michou-Saucet, Jose, et al., 1984
Δvap H
36.40
kJ/mol
318.00
NIST Van Ness, Soczek, et al., 1967
Δvap H
36.10
kJ/mol
330.50
NIST Sipowska and Wieczorek, 1984
Δvap H
34.50 ± 0.10
kJ/mol
331.00
NIST Waddington, Todd, et al., 1947
Δvap H
34.49
kJ/mol
331.30
Majer and Svoboda 1985 i Waddington et al., 1947
Majer and Svoboda 1985, table 1.1.14, p. 79
Δvap H
34.40 ± 0.10
kJ/mol
333.00
NIST Majer, Svoboda, et al., 1979
Δvap H
34.35
kJ/mol
333.20
Majer and Svoboda 1985 i Majer et al., 1979a
Majer and Svoboda 1985, table 1.1.14, p. 79
Δvap H
36.00
kJ/mol
335.50
NIST Willingham, Taylor, et al., 1945
Δvap H
36.10
kJ/mol
336.00
NIST i Stephenson and Malanowski, 1987
See also Forziati, Norris, et al., 1949.
Δvap H
33.20 ± 0.10
kJ/mol
350.00
NIST Waddington, Todd, et al., 1947
Δvap H
33.21
kJ/mol
350.50
Majer and Svoboda 1985 i Waddington et al., 1947
Majer and Svoboda 1985, table 1.1.14, p. 79
Δvap H
34.70
kJ/mol
350.50
NIST Segura, Wisniak, et al., 2002
Δvap H
33.10 ± 0.10
kJ/mol
353.00
NIST Majer, Svoboda, et al., 1979
Δvap H
33.07
kJ/mol
353.20
Majer and Svoboda 1985 i Majer et al., 1979a
Majer and Svoboda 1985, table 1.1.14, p. 79
Δvap H
35.50
kJ/mol
353.50
NIST Smith, 1940
Δvap H
35.40
kJ/mol
355.50
NIST Thomson, 1946
Δvap H
35.20
kJ/mol
360.50
NIST Ortega, González, et al., 2001
Δvap H
32.28
kJ/mol
363.70
Majer and Svoboda 1985 i Waddington et al., 1947
Majer and Svoboda 1985, table 1.1.14, p. 79
Δvap H
32.00
kJ/mol
371.00
NIST Pitzer K.S., 1940
Δvap H
31.70
kJ/mol
371.60
KDB
Δvap H
31.77
kJ/mol
371.60
NIST Majer and Svoboda, 1985
ν
[0.0000005; 0.0000007]
m2 /s
[283.15; 313.15]
ν
0.0000007
m2 /s
283.15
Kinematic Viscosities for Ether + Alkane Mixtures: Experimental Results and UNIFAC-VISCO Parameters
ν
0.0000007
m2 /s
283.15
Experimental and Predicted Kinematic Viscosities for Alkane + Chloroalkane Mixtures
ν
0.0000006
m2 /s
298.15
Kinematic Viscosities for Ether + Alkane Mixtures: Experimental Results and UNIFAC-VISCO Parameters
ν
0.0000006
m2 /s
298.15
Experimental and Predicted Kinematic Viscosities for Alkane + Chloroalkane Mixtures
ν
0.0000005
m2 /s
313.15
Kinematic Viscosities for Ether + Alkane Mixtures: Experimental Results and UNIFAC-VISCO Parameters
ν
0.0000005
m2 /s
313.15
Experimental and Predicted Kinematic Viscosities for Alkane + Chloroalkane Mixtures
Pvap
[0.82; 2630.00]
kPa
[263.45; 537.20]
Pvap
0.82
kPa
263.45
Isothermal vapor- liquid equilibria and excess molar enthalpy of 2-methylpyrazine (2MP) containing binary mixtures. Comparison with DISQUAC predictions
Pvap
1.54
kPa
273.15
Excess Properties and Vapor Pressure of 2-Diethylaminoethylamine + n-Heptane
Pvap
1.53
kPa
273.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
1.55
kPa
273.27
Isothermal vapor- liquid equilibria and excess molar enthalpy of 2-methylpyrazine (2MP) containing binary mixtures. Comparison with DISQUAC predictions
Pvap
2.76
kPa
283.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
2.77
kPa
283.21
Isothermal vapor- liquid equilibria and excess molar enthalpy of 2-methylpyrazine (2MP) containing binary mixtures. Comparison with DISQUAC predictions
Pvap
2.80
kPa
283.70
Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap
3.63
kPa
288.15
Experimental and predicted vapour-liquid equilibrium of the binary mixtures n-heptane + chlorobutane isomers
Pvap
4.74
kPa
293.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
4.76
kPa
293.15
Excess Properties and Vapor Pressure of 2-Diethylaminoethylamine + n-Heptane
Pvap
4.77
kPa
293.25
Isothermal vapor- liquid equilibria and excess molar enthalpy of 2-methylpyrazine (2MP) containing binary mixtures. Comparison with DISQUAC predictions
Pvap
4.80
kPa
293.50
Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap
6.09
kPa
298.15
Experimental and predicted vapour-liquid equilibrium of the binary mixtures n-heptane + chlorobutane isomers
Pvap
6.09
kPa
298.15
NCMS SOLV-DB
Pvap
6.10
kPa
298.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
6.10
kPa
298.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
Pvap
6.14
kPa
298.15
Excess Properties and Vapor Pressure of 2-Diethylaminoethylamine + n-Heptane
Pvap
12.00
kPa
302.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
7.70
kPa
303.10
Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap
7.81
kPa
303.15
Isothermal vapor- liquid equilibria and excess molar enthalpy of 2-methylpyrazine (2MP) containing binary mixtures. Comparison with DISQUAC predictions
Pvap
7.79
kPa
303.15
Measurement and Correlation of Isothermal Binary Vapor Liquid Equilibrium for Diethyl Carbonate + Isooctane/n-Heptane/Toluene Systems
Pvap
7.83
kPa
303.15
Excess Properties and Vapor Pressure of 2-Diethylaminoethylamine + n-Heptane
Pvap
7.79
kPa
303.15
Excess properties and vapour pressure of (3-diethylaminopropylamine + n-alkanes)
Pvap
7.90
kPa
303.15
Bubble Pressure Measurement and Prediction for n-Hexadecane and n-Eicosane + Cyclohexane, Methylcyclohexane, and Ethylcyclohexane Binary Mixtures from 303.15 to 393.15 K
Pvap
7.87
kPa
303.15
Phase equilibria for mixtures containing nonionic surfactant systems: Modeling and experiments
Pvap
7.79
kPa
303.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
7.92
kPa
303.15
Measurement and correlation of (vapor + liquid) equilibria for the {2-propoxyethanol (C3E1) + n-hexane} and the {2-propoxyethanol (C3E1) + n-heptane} systems
Pvap
8.32
kPa
305.26
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
9.85
kPa
308.15
Measurement and Correlation of Isothermal Binary Vapor Liquid Equilibrium for Diethyl Carbonate + Isooctane/n-Heptane/Toluene Systems
Pvap
9.92
kPa
308.15
Vapour liquid equilibrium at T = 308.15 K for binary systems: Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + dibromomethane, bromotrichloromethane + bromochloromethane and dibromomethane + bromochloromethane. Experimental data and modelling
Pvap
9.87
kPa
308.15
Experimental and predicted vapour-liquid equilibrium of the binary mixtures n-heptane + chlorobutane isomers
Pvap
10.55
kPa
310.22
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
12.41
kPa
313.12
Isothermal vapor- liquid equilibria and excess molar enthalpy of 2-methylpyrazine (2MP) containing binary mixtures. Comparison with DISQUAC predictions
Pvap
12.31
kPa
313.15
Thermodynamic behaviour of second generation biofuels: Vapour liquid equilibria and excess enthalpies of the binary mixtures 2-pentanol and n-heptane or 2,2,4-trimethylpentane
Pvap
12.24
kPa
313.15
Measurement and correlation of (vapor + liquid) equilibria for the {2-propoxyethanol (C3E1) + n-hexane} and the {2-propoxyethanol (C3E1) + n-heptane} systems
Pvap
12.34
kPa
313.15
Measurement and Correlation of Isothermal Binary Vapor Liquid Equilibrium for Diethyl Carbonate + Isooctane/n-Heptane/Toluene Systems
Pvap
12.32
kPa
313.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
12.33
kPa
313.15
Phase equilibria for mixtures containing nonionic surfactant systems: Modeling and experiments
Pvap
12.33
kPa
313.15
Vapor Liquid Equilibria of Binary Mixtures Containing 2-Butanol and Hydrocarbons at 313.15 K
Pvap
12.33
kPa
313.15
Vapor-Liquid Equilibria of Binary Mixtures Containing 1-Butanol and Hydrocarbons at 313.15 K
Pvap
12.40
kPa
313.15
Bubble Pressure Measurement and Prediction for n-Hexadecane and n-Eicosane + Cyclohexane, Methylcyclohexane, and Ethylcyclohexane Binary Mixtures from 303.15 to 393.15 K
Pvap
12.32
kPa
313.15
Excess properties and vapour pressure of (3-diethylaminopropylamine + n-alkanes)
Pvap
12.34
kPa
313.15
Phase equilibrium properties of the ternary mixture dibutyl ether + toluene + heptane at 313.15 K
Pvap
12.39
kPa
313.15
Excess Properties and Vapor Pressure of 2-Diethylaminoethylamine + n-Heptane
Pvap
12.40
kPa
313.20
Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap
13.09
kPa
314.93
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
14.07
kPa
316.50
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
31.00
kPa
318.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
15.33
kPa
318.15
Measurement and Correlation of Isothermal Binary Vapor Liquid Equilibrium for Diethyl Carbonate + Isooctane/n-Heptane/Toluene Systems
Pvap
16.01
kPa
319.06
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
16.19
kPa
319.71
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
18.80
kPa
323.00
Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap
18.98
kPa
323.10
Isothermal vapor- liquid equilibria and excess molar enthalpy of 2-methylpyrazine (2MP) containing binary mixtures. Comparison with DISQUAC predictions
Pvap
18.90
kPa
323.15
Measurement and Correlation of Isothermal Binary Vapor Liquid Equilibrium for Diethyl Carbonate + Isooctane/n-Heptane/Toluene Systems
Pvap
18.85
kPa
323.15
Excess properties and vapour pressure of (3-diethylaminopropylamine + n-alkanes)
Pvap
18.95
kPa
323.15
Phase equilibria for mixtures containing nonionic surfactant systems: Modeling and experiments
Pvap
18.91
kPa
323.15
Measurement and correlation of (vapor + liquid) equilibria for the {2-propoxyethanol (C3E1) + n-hexane} and the {2-propoxyethanol (C3E1) + n-heptane} systems
Pvap
18.85
kPa
323.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
19.00
kPa
323.15
Bubble Pressure Measurement and Prediction for n-Hexadecane and n-Eicosane + Cyclohexane, Methylcyclohexane, and Ethylcyclohexane Binary Mixtures from 303.15 to 393.15 K
Pvap
18.96
kPa
323.15
Excess Properties and Vapor Pressure of 2-Diethylaminoethylamine + n-Heptane
Pvap
19.10
kPa
323.62
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
20.00
kPa
324.56
Measurements and correlation of vapour liquid equilibria of 2-butanone and hydrocarbons binary systems at two different pressures
Pvap
21.45
kPa
326.44
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
23.04
kPa
328.15
Isothermal Vapor-Liquid Equilibria for Binary Mixtures of Methyl Nonafluorobutyl Ether + Acetone, Cyclopentyl Methyl Ether, Ethyl Acetate, n-Heptane, Methanol, and Toluene
Pvap
23.79
kPa
329.04
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
24.01
kPa
329.07
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
26.15
kPa
331.39
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
26.14
kPa
331.48
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
26.49
kPa
331.82
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
27.90
kPa
332.80
Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap
27.10
kPa
332.90
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
28.13
kPa
333.07
Isothermal vapor- liquid equilibria and excess molar enthalpy of 2-methylpyrazine (2MP) containing binary mixtures. Comparison with DISQUAC predictions
Pvap
28.20
kPa
333.15
Bubble Pressure Measurement and Prediction for n-Hexadecane and n-Eicosane + Cyclohexane, Methylcyclohexane, and Ethylcyclohexane Binary Mixtures from 303.15 to 393.15 K
Pvap
50.00
kPa
333.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
27.99
kPa
333.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
28.14
kPa
333.15
Excess Properties and Vapor Pressure of 2-Diethylaminoethylamine + n-Heptane
Pvap
27.98
kPa
333.15
Excess properties and vapour pressure of (3-diethylaminopropylamine + n-alkanes)
Pvap
27.97
kPa
333.21
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
29.69
kPa
334.81
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
30.01
kPa
334.91
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
29.90
kPa
335.20
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
30.59
kPa
335.45
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
30.51
kPa
335.50
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
32.30
kPa
336.85
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
32.24
kPa
336.95
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
32.84
kPa
337.48
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
34.34
kPa
338.47
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
35.01
kPa
339.08
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
35.53
kPa
339.56
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
35.66
kPa
339.70
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
36.90
kPa
340.55
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
37.87
kPa
341.35
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
38.89
kPa
341.94
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
40.00
kPa
342.77
Determination and correlation of vapor liquid equilibrium for binary systems consisting of close-boiling components
Pvap
40.01
kPa
342.78
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
40.26
kPa
342.90
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
40.12
kPa
342.96
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
40.62
kPa
343.04
Isothermal vapor- liquid equilibria and excess molar enthalpy of 2-methylpyrazine (2MP) containing binary mixtures. Comparison with DISQUAC predictions
Pvap
40.64
kPa
343.15
Excess Properties and Vapor Pressure of 2-Diethylaminoethylamine + n-Heptane
Pvap
40.43
kPa
343.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
40.60
kPa
343.15
Bubble Pressure Measurement and Prediction for n-Hexadecane and n-Eicosane + Cyclohexane, Methylcyclohexane, and Ethylcyclohexane Binary Mixtures from 303.15 to 393.15 K
Pvap
40.43
kPa
343.15
Excess properties and vapour pressure of (3-diethylaminopropylamine + n-alkanes)
Pvap
40.40
kPa
343.15
Vapor Liquid Equilibrium Data for the Morpholine-4-carbaldehyde + n-Hexane or n-Heptane Binary Systems Using a Static-Synthetic Apparatus
Pvap
41.30
kPa
343.75
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
42.35
kPa
344.47
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
42.88
kPa
344.76
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
44.75
kPa
346.04
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
45.01
kPa
346.14
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
45.00
kPa
346.23
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
46.80
kPa
347.16
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
46.71
kPa
347.28
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
47.50
kPa
347.76
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
47.80
kPa
347.85
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
84.00
kPa
348.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
48.90
kPa
348.55
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
49.09
kPa
348.72
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
50.00
kPa
349.19
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
50.01
kPa
349.19
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
50.00
kPa
349.24
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
50.00
kPa
349.29
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
50.45
kPa
349.40
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
50.62
kPa
349.53
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
50.97
kPa
349.68
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
51.49
kPa
350.12
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
52.50
kPa
350.70
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
53.33
kPa
351.08
Determination and correlation of vapor liquid equilibrium for binary systems consisting of close-boiling components
Pvap
53.30
kPa
351.14
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
53.41
kPa
351.21
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
53.30
kPa
351.45
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
53.30
kPa
351.50
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
55.01
kPa
352.01
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
55.00
kPa
352.07
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
55.30
kPa
352.35
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
55.76
kPa
352.49
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
56.20
kPa
352.58
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
57.56
kPa
353.01
Isothermal vapor- liquid equilibria and excess molar enthalpy of 2-methylpyrazine (2MP) containing binary mixtures. Comparison with DISQUAC predictions
Pvap
56.99
kPa
353.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
57.27
kPa
353.15
Excess Properties and Vapor Pressure of 2-Diethylaminoethylamine + n-Heptane
Pvap
57.09
kPa
353.15
Vapor Liquid Equilibrium and Excess Enthalpy Data for Systems Containing N,N-Dimethylacetamide
Pvap
57.34
kPa
353.15
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
57.10
kPa
353.15
Bubble Pressure Measurement and Prediction for n-Hexadecane and n-Eicosane + Cyclohexane, Methylcyclohexane, and Ethylcyclohexane Binary Mixtures from 303.15 to 393.15 K
Pvap
57.50
kPa
353.41
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
57.88
kPa
353.62
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
58.57
kPa
353.90
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
60.01
kPa
354.63
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
60.00
kPa
354.63
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
60.00
kPa
354.69
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
60.00
kPa
354.72
Isobaric vapor liquid equilibria for the n-hexane + 2-isopropoxyethanol and n-heptane + 2-isopropoxyethanol systems
Pvap
60.18
kPa
354.79
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
61.71
kPa
355.44
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
62.50
kPa
355.94
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
63.11
kPa
356.25
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
63.98
kPa
356.61
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
64.60
kPa
356.78
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
65.01
kPa
357.10
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
65.00
kPa
357.14
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
65.30
kPa
357.25
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
66.42
kPa
357.84
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
66.66
kPa
357.85
Determination and correlation of vapor liquid equilibrium for binary systems consisting of close-boiling components
Pvap
67.50
kPa
358.32
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
67.99
kPa
358.49
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
68.27
kPa
358.68
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
70.24
kPa
359.38
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
70.01
kPa
359.42
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
70.00
kPa
359.45
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
71.15
kPa
359.98
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
72.50
kPa
360.54
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
73.29
kPa
360.77
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
74.25
kPa
361.33
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
75.01
kPa
361.59
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
75.00
kPa
361.60
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
75.00
kPa
361.61
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
75.00
kPa
361.66
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
75.87
kPa
362.03
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
76.47
kPa
362.11
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
76.55
kPa
362.30
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
77.50
kPa
362.66
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
78.94
kPa
363.15
Excess Properties and Vapor Pressure of 2-Diethylaminoethylamine + n-Heptane
Pvap
78.59
kPa
363.15
Vapor Liquid Equilibrium Data for the Morpholine-4-carbaldehyde + n-Hexane or n-Heptane Binary Systems Using a Static-Synthetic Apparatus
Pvap
79.09
kPa
363.15
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
78.59
kPa
363.15
Isothermal Vapor-Liquid Equilibria and Excess Enthalpies of (Propyl Ethanoate + Heptane), (Propyl Ethanoate + Cyclohexane), and (Propyl Ethanoate + 1-Hexene)
Pvap
116.00
kPa
363.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
78.70
kPa
363.15
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
79.00
kPa
363.32
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
79.55
kPa
363.44
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
79.99
kPa
363.64
Determination and correlation of vapor liquid equilibrium for binary systems consisting of close-boiling components
Pvap
80.01
kPa
363.67
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
80.00
kPa
363.67
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
80.00
kPa
363.68
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
80.00
kPa
363.74
Isobaric vapor liquid equilibria for the n-hexane + 2-isopropoxyethanol and n-heptane + 2-isopropoxyethanol systems
Pvap
81.28
kPa
364.24
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
81.76
kPa
364.36
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
82.50
kPa
364.71
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
83.48
kPa
364.91
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
83.45
kPa
364.95
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
84.05
kPa
365.32
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
85.00
kPa
365.65
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
85.00
kPa
365.65
Experimental Vapor-Liquid Equilibria and Thermodynamic Modeling of the Methanol + n-Heptane and 1-Butanol + Aniline Binary Systems
Pvap
86.30
kPa
366.20
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
86.56
kPa
366.23
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
87.01
kPa
366.41
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
87.50
kPa
366.61
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
88.10
kPa
366.87
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
88.40
kPa
366.87
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
90.13
kPa
367.39
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
90.00
kPa
367.53
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
91.09
kPa
367.97
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
92.50
kPa
368.42
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
91.30
kPa
368.45
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
92.70
kPa
368.55
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
93.32
kPa
368.70
Determination and correlation of vapor liquid equilibrium for binary systems consisting of close-boiling components
Pvap
93.46
kPa
368.83
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
94.00
kPa
368.85
Vapor Liquid Equilibria Measurements for the Five Linear C6 Esters with n-Octane
Pvap
94.00
kPa
368.98
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
94.01
kPa
368.99
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
94.00
kPa
369.04
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
95.00
kPa
369.32
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
94.60
kPa
369.35
Bubble-Temperature Measurements on Some Binary Mixtures Formed by Tetrahydrofuran or Amyl Alcohol with Hydrocarbons, Chlorohydrocarbons, or Butanols at (94.6 or 95.8) kPa
Pvap
96.10
kPa
369.49
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
95.80
kPa
369.75
Bubble Temperature Measurements on the Binary Mixtures of n-Heptane or Nitrobenzene or Chlorobenzene with Some Chloroethanes and Chloroethylenes at (94.6 to 95.8) kPa
Pvap
95.75
kPa
369.75
Bubble points of some binary mixtures formed by o-cresol at 95.75 kPa
Pvap
95.80
kPa
369.78
Bubble Temperature Measurements on the Binary Mixtures of n-Heptane or Nitrobenzene or Chlorobenzene with Some Chloroethanes and Chloroethylenes at (94.6 to 95.8) kPa
Pvap
96.33
kPa
369.84
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
97.50
kPa
370.19
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
97.43
kPa
370.27
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
97.43
kPa
370.27
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
98.52
kPa
370.74
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
98.52
kPa
370.74
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
98.98
kPa
370.85
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
99.39
kPa
370.93
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
99.39
kPa
370.93
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
101.30
kPa
370.97
A New Test System for Distillation Efficiency Experiments at Elevated Liquid Viscosities: Vapor-Liquid Equilibrium and Liquid Viscosity Data for Cyclopentanol + Cyclohexanol
Pvap
100.00
kPa
371.07
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
100.00
kPa
371.11
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
99.78
kPa
371.13
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
99.78
kPa
371.13
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
100.00
kPa
371.20
Isobaric vapor liquid equilibria for the n-hexane + 2-isopropoxyethanol and n-heptane + 2-isopropoxyethanol systems
Pvap
101.30
kPa
371.28
Vapor Liquid Equilibria Measurements for Di-n-Propyl Ether and Butyl Ethyl Ether with n-Heptane
Pvap
100.91
kPa
371.30
Isobaric vapour liquid equilibria for binary mixtures of n-heptane with bromobenzene, chlorobenzene and fluorobenzene at atmospheric pressure
Pvap
100.60
kPa
371.30
Isobaric vapour liquid equilibria for binary mixtures of n-heptane with bromobenzene, chlorobenzene and fluorobenzene at atmospheric pressure
Pvap
100.80
kPa
371.35
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
100.68
kPa
371.35
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
101.30
kPa
371.35
Measurements and correlation of vapour liquid equilibria of 2-butanone and hydrocarbons binary systems at two different pressures
Pvap
101.32
kPa
371.38
Improvements in the Experimentation and the Representation of Thermodynamic Properties (iso-p VLE and yE) of Alkyl Propanoate + Alkane Binaries
Pvap
101.32
kPa
371.38
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
101.30
kPa
371.40
Isobaric vapor-liquid equilibrium for binary systemsof toluene + o-xylene, benzene + o-xylene, nonane + benzene and nonane + heptane at 101.3 kPa
Pvap
100.95
kPa
371.40
Isobaric vapour liquid equilibria for binary mixtures of n-heptane with bromobenzene, chlorobenzene and fluorobenzene at atmospheric pressure
Pvap
101.30
kPa
371.47
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
101.32
kPa
371.51
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
101.07
kPa
371.52
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
101.07
kPa
371.52
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
101.30
kPa
371.53
Isobaric vapor-liquid equilibrium of three binary systems containing dimethyl succinate, dimethyl glutarate and dimethyl adipate at 2, 5.2 and 8.3 kPa
Pvap
101.32
kPa
371.55
Multiproperty Correlation of Experimental Data of the Binaries Propyl Ethanoate + Alkanes (Pentane to Decane). New Experimental Information for Vapor Liquid Equilibrium and Mixing Properties
Pvap
101.32
kPa
371.56
Solutions of alkyl methanoates and alkanes: Simultaneous modeling of phase equilibria and mixing properties. Estimation of behavior by UNIFAC with recalculation of parameters
Pvap
101.32
kPa
371.56
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
100.00
kPa
371.58
Isobaric Vapor-Liquid Equilibrium for Two Binary Systems of n-Heptane + sec-Butyl Acetate and Methylcyclohexane + sec-Butyl Acetate under Atmosphere
Pvap
101.74
kPa
371.63
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether
Pvap
101.46
kPa
371.66
Isobaric vapor liquid equilibria for binary systems of butyl chlorides with heptane, toluene and cyclohexane at 101.3, 80.0 and 53.3 kPa
Pvap
102.91
kPa
371.75
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K
Pvap
101.30
kPa
371.76
Vapor-Liquid Equilibrium Data for the Binary Decafluoropentane (HFC-43-10meec) + Heptane, Decafluoropentane + Butyl Ethyl Ether, Octafluorobutane (HFC-338pcc) + Butyl Ethyl Ether, and Heptafluoro Propyl Methyl Ether (HFE-347mcc) + HFC-338pcc Systems at 101.3 kPa
Pvap
102.90
kPa
372.08
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
103.43
kPa
372.25
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
103.43
kPa
372.25
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
103.56
kPa
372.36
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
103.56
kPa
372.36
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
103.92
kPa
372.42
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
104.41
kPa
372.56
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
104.41
kPa
372.56
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
105.00
kPa
372.72
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
104.67
kPa
372.76
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
104.67
kPa
372.76
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
105.83
kPa
372.97
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
105.83
kPa
372.97
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
106.29
kPa
373.17
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
106.29
kPa
373.17
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
106.48
kPa
373.25
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
107.02
kPa
373.48
Isobaric vapor-liquid equilibrium for systems containing sulfur compounds
Pvap
107.02
kPa
373.48
Isobaric vapor-liquid equilibrium for four binary systems of thiophene
Pvap
108.71
kPa
373.98
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
108.80
kPa
374.00
Isobaric Vapor-Liquid Equilibria of Heptane + 1-Butanol and Heptane + 1-Pentanol Systems at (53.3 and 91.3) kPa
Pvap
110.00
kPa
374.31
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
110.39
kPa
374.50
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
111.77
kPa
374.93
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
113.35
kPa
375.41
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
115.00
kPa
375.85
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
116.21
kPa
376.29
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
119.14
kPa
377.17
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
120.00
kPa
377.34
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
120.32
kPa
377.51
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
120.89
kPa
377.68
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
152.00
kPa
378.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
123.70
kPa
378.49
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
125.00
kPa
378.77
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
126.80
kPa
379.37
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
130.00
kPa
380.18
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
130.00
kPa
380.26
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
132.04
kPa
380.83
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
135.00
kPa
381.52
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
140.00
kPa
382.84
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
145.00
kPa
384.13
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
145.56
kPa
384.39
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
150.00
kPa
385.36
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
155.00
kPa
386.60
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
160.00
kPa
387.78
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
165.00
kPa
388.94
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
166.41
kPa
389.41
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
170.00
kPa
390.08
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
175.00
kPa
391.17
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
180.00
kPa
392.25
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
182.39
kPa
392.89
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
183.70
kPa
393.15
Vapor Liquid Equilibrium Data for the Morpholine-4-carbaldehyde + n-Hexane or n-Heptane Binary Systems Using a Static-Synthetic Apparatus
Pvap
204.00
kPa
393.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
185.00
kPa
393.30
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
185.50
kPa
393.58
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
186.60
kPa
393.79
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
190.00
kPa
394.34
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
189.67
kPa
394.43
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
192.97
kPa
395.10
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
195.00
kPa
395.37
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
196.04
kPa
395.73
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
197.85
kPa
396.09
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
200.00
kPa
396.37
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
199.97
kPa
396.50
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
Pvap
200.79
kPa
396.70
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
205.00
kPa
397.35
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
210.00
kPa
398.29
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
215.00
kPa
399.24
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
220.00
kPa
400.17
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
225.00
kPa
401.07
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
224.89
kPa
401.26
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
230.00
kPa
401.97
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
235.00
kPa
402.84
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
240.00
kPa
403.72
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
245.00
kPa
404.57
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
250.00
kPa
405.42
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
248.92
kPa
405.44
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
255.00
kPa
406.25
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
260.00
kPa
407.05
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
265.00
kPa
407.87
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
286.00
kPa
408.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
286.00
kPa
408.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
270.00
kPa
408.65
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
275.00
kPa
409.42
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
275.09
kPa
409.66
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
280.00
kPa
410.22
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
Pvap
302.76
kPa
413.80
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
352.00
kPa
418.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
352.00
kPa
418.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
341.76
kPa
419.17
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
378.80
kPa
423.85
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
441.00
kPa
428.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
441.00
kPa
428.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
420.15
kPa
428.69
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
477.00
kPa
433.15
In Situ Determination of Phase Equilibria of Methyl Benzoate + Alkane Mixtures Using an Infrared Absorption Method. Comparison with Polar GC-SAFT Predictions
Pvap
467.65
kPa
433.81
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
535.00
kPa
438.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
535.00
kPa
438.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
518.27
kPa
438.86
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
587.00
kPa
443.15
In Situ Determination of Phase Equilibria of Methyl Benzoate + Alkane Mixtures Using an Infrared Absorption Method. Comparison with Polar GC-SAFT Predictions
Pvap
568.27
kPa
443.50
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
619.76
kPa
447.95
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
654.00
kPa
448.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
654.00
kPa
448.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
666.97
kPa
451.80
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
703.00
kPa
453.15
In Situ Determination of Phase Equilibria of Methyl Benzoate + Alkane Mixtures Using an Infrared Absorption Method. Comparison with Polar GC-SAFT Predictions
Pvap
711.00
kPa
453.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
711.00
kPa
453.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
726.16
kPa
456.35
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
780.00
kPa
458.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
780.00
kPa
458.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
773.29
kPa
459.78
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
853.00
kPa
463.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
853.00
kPa
463.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
850.62
kPa
465.07
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
935.00
kPa
468.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
935.00
kPa
468.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
925.23
kPa
469.84
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
980.00
kPa
473.10
A novel continuous flow apparatus with a video camera system for high pressure phase equilibrium measurements
Pvap
1022.00
kPa
473.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1022.00
kPa
473.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
980.00
kPa
473.20
A novel continuous flow apparatus with a video camera system for high pressure phase equilibrium measurements
Pvap
960.00
kPa
473.30
A novel continuous flow apparatus with a video camera system for high pressure phase equilibrium measurements
Pvap
983.90
kPa
473.39
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1030.55
kPa
476.11
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1114.00
kPa
478.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1114.00
kPa
478.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1092.41
kPa
479.57
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1203.00
kPa
483.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1203.00
kPa
483.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1169.38
kPa
483.67
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1242.28
kPa
487.36
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1307.00
kPa
488.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1307.00
kPa
488.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1313.39
kPa
490.81
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1409.00
kPa
493.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1409.00
kPa
493.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1384.19
kPa
494.11
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1443.40
kPa
496.77
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1532.00
kPa
498.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1532.00
kPa
498.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1490.00
kPa
498.20
A novel continuous flow apparatus with a video camera system for high pressure phase equilibrium measurements
Pvap
1470.00
kPa
498.20
A novel continuous flow apparatus with a video camera system for high pressure phase equilibrium measurements
Pvap
1460.00
kPa
498.20
A novel continuous flow apparatus with a video camera system for high pressure phase equilibrium measurements
Pvap
1500.00
kPa
498.65
Measurement of VLE Data by Using an Experimental Installation with Automatic Control: Modeling of Binary Systems of Methyl Acetate or Ethyl Acetate with n-Heptane or 2,2,4-Trimethylpentane at Both 0.1 and 1.5 MPa
Pvap
1518.18
kPa
500.01
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1649.00
kPa
503.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1649.00
kPa
503.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1604.13
kPa
503.59
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1699.51
kPa
507.39
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1781.00
kPa
508.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1781.00
kPa
508.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1793.01
kPa
510.95
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
1910.00
kPa
513.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1910.00
kPa
513.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
1911.60
kPa
515.27
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
2049.00
kPa
518.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
2049.00
kPa
518.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
2019.09
kPa
518.99
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
2116.11
kPa
522.22
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
2201.00
kPa
523.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
2201.00
kPa
523.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
2170.00
kPa
523.20
A novel continuous flow apparatus with a video camera system for high pressure phase equilibrium measurements
Pvap
2180.00
kPa
523.20
A novel continuous flow apparatus with a video camera system for high pressure phase equilibrium measurements
Pvap
2190.00
kPa
523.20
A novel continuous flow apparatus with a video camera system for high pressure phase equilibrium measurements
Pvap
2219.70
kPa
525.53
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
2358.00
kPa
528.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
2358.00
kPa
528.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
2309.81
kPa
528.30
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
2416.50
kPa
531.47
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
2519.00
kPa
533.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
2519.00
kPa
533.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
2525.68
kPa
534.57
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
Pvap
2630.00
kPa
536.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
2630.00
kPa
536.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
Pvap
2621.76
kPa
537.20
Vapor Pressures of n-Heptane Determined by Comparative Ebulliometry
n 0
[1.37197; 1.53800]
[283.15; 323.15]
n 0
1.39290
283.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
n 0
1.39033
288.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
n 0
1.38820
293.10
(Liquid + liquid) equilibria of three ternary systems: (heptane + benzene + N-formylmorpholine), (heptane + toluene + N-formylmorpholine), (heptane + xylene + N-formylmorpholine) from T = (298.15 to 353.15) K i
at 1 kPa
n 0
1.50240
293.10
(Liquid + liquid) equilibria of {heptane + xylene + N-formylmorpholine} ternary system i
at 1 kPa
n 0
1.38790
293.15
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K i
at 1 kPa
n 0
1.38780
293.15
A novel static analytical apparatus for phase equilibrium measurements i
at 1 kPa
n 0
1.38760
293.15
Limiting Activity Coefficients by Comparative Tensimetry: 1-Propanol and 1-Butanol in Heptane and in Octane i
at 1 kPa
n 0
1.38780
293.15
Infinite Dilution Activity Coefficients of Hydrocarbons in Triethylene Glycol and Tetraethylene Glycol i
at 1 kPa
n 0
1.38778
293.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
n 0
1.38770
293.15
Vapor Liquid Equilibrium Data for the Morpholine-4-carbaldehyde + n-Hexane or n-Heptane Binary Systems Using a Static-Synthetic Apparatus i
at 1 kPa
n 0
1.38720
293.15
Physical properties of {anisole + n-alkanes} at temperatures between (293.15 and 303.15) K
n 0
1.38780
293.15
Isothermal vapour-liquid equilibrium data for the binary systems of (CHF3 or C2F6) and n-heptane
n 0
1.38760
293.15
Bubble points of some binary mixtures formed by o-cresol at 95.75 kPa i
at 1 kPa
n 0
1.38776
293.15
Mixing properties of binary mixtures presenting azeotropes at several temperatures
n 0
1.38730
293.20
Liquid phase equilibria for mixtures of (an aliphatic hydrocarbon + toluene + gamma-butyrolactone) i
at 1 kPa
n 0
1.38850
298.10
Excess Enthalpies and Thermal Conductivity Coefficients for Binary Mixtures of Carbon Tetrachloride and Four Alkanes (C5 to C8) at a Temperature of 298.15 K i
at 1 kPa
n 0
1.38520
298.15
Isothermal vapour-liquid equilibrium data for the binary systems of (CHF3 or C2F6) and n-heptane
n 0
1.53800
298.15
Thermodynamic and Acoustic Properties of Mixtures of Dibromomethane + Heptane i
at 1 kPa
n 0
1.38500
298.15
NCMS SOLV-DB
n 0
1.38600
298.15
Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K
n 0
1.38517
298.15
Mixing properties of binary mixtures presenting azeotropes at several temperatures
n 0
1.38511
298.15
KDB
n 0
1.38480
298.15
Excess molar volumes of the ternary system {methylcyclohexane (1) + cyclohexane (2) + n-alkanes (3)} at T = 298.15 K i
at 1 kPa
n 0
1.38517
298.15
Solvent extraction of thiophene from n-alkanes (C7, C12, and C16) using the ionic liquid [C8mim][BF4] i
at 1 kPa
n 0
1.38530
298.15
Thermodynamic and acoustic properties of (heptane + dodecane) mixtures under elevated pressures i
at 1 kPa
n 0
1.38520
298.15
Molar heat capacities for (2-methyl-2-butanol + heptane) mixtures and cyclopentanol at temperatures from (284 to 353) K i
at 1 kPa
n 0
1.38515
298.15
Extraction of toluene from aliphatic compounds using an ionic liquid as solvent: Influence of the alkane on the (liquid + liquid) equilibrium i
at 1 kPa
n 0
1.38529
298.15
Application of [HMim][NTf2], [HMim][TfO] and [BMim][TfO] ionic liquids on the extraction of toluene from alkanes: Effect of the anion and the alkyl chain length of the cation on the LLE i
at 1 kPa
n 0
1.38529
298.15
1-Alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids as solvents in the separation of azeotropic mixtures i
at 1 kPa
n 0
1.38515
298.15
Separation of Benzene from Linear Alkanes (C6-C9) Using 1-Ethyl-3-Methylimidazolium Ethylsulfate at T = 298.15 K i
at 1 kPa
n 0
1.38529
298.15
Application of 1-alkyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide ionic liquids for the ethanol removal from its mixtures with alkanes i
at 1 kPa
n 0
1.38529
298.15
Cation effect of ammonium imide based ionic liquids in alcohols extraction from alcohol-alkane azeotropic mixtures i
at 1 kPa
n 0
1.38519
298.15
Separation of sulfur compounds from alkanes with 1-alkylcyanopyridinium-based ionic liquids i
at 1 kPa
n 0
1.38529
298.15
Quaternary (liquid + liquid) equilibrium data for the extraction of toluene from alkanes using the ionic liquid [EMim][MSO4] i
at 1 kPa
n 0
1.38529
298.15
(Liquid + liquid) equilibrium of ternary and quaternary systems containing heptane, cyclohexane, toluene and the ionic liquid [EMim][N(CN)2]. Experimental data and correlation i
at 1 kPa
n 0
1.38517
298.15
Phase behaviour of 1-methyl-3-octylimidazolium bis[trifluoromethylsulfonyl]imide with thiophene and aliphatic hydrocarbons: The influence of n-alkane chain length i
at 1 kPa
n 0
1.38530
298.15
Improvements in the Experimentation and the Representation of Thermodynamic Properties (iso-p VLE and yE) of Alkyl Propanoate + Alkane Binaries i
at 1 kPa
n 0
1.38668
298.15
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether i
at 1 kPa
n 0
1.38520
298.15
Fully automatized apparatus for determining speed of sound for liquids in the temperature and pressure interval (283.15-343.15) K and (0.1-95) MPa i
at 1 kPa
n 0
1.38550
298.15
Physical properties of {anisole + n-alkanes} at temperatures between (293.15 and 303.15) K
n 0
1.38517
298.15
A study on the liquid liquid equilibria of 1-alkyl-3-methylimidazolium hexafluorophosphate with ethanol and alkanes i
at 1 kPa
n 0
1.38760
298.15
Liquid-liquid equilibria for ternary mixtures of 2,2-dimethyl-1,3-dioxolane-4-methanol with n-heptane, toluene, ethanol and water i
at 1 kPa
n 0
1.38520
298.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
n 0
1.38520
298.15
Multiproperty Correlation of Experimental Data of the Binaries Propyl Ethanoate + Alkanes (Pentane to Decane). New Experimental Information for Vapor Liquid Equilibrium and Mixing Properties
n 0
1.38530
298.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa i
at 1 kPa
n 0
1.38515
298.15
Extraction of Benzene from Aliphatic Compounds Using Commercial Ionic Liquids as Solvents: Study of the Liquid Liquid Equilibrium at T = 298.15 K i
at 1 kPa
n 0
1.38527
298.15
Measurement of VLE Data by Using an Experimental Installation with Automatic Control: Modeling of Binary Systems of Methyl Acetate or Ethyl Acetate with n-Heptane or 2,2,4-Trimethylpentane at Both 0.1 and 1.5 MPa i
at 1 kPa
n 0
1.38519
298.15
Separation of pyridine from heptane with tricyanomethanide-based ionic liquids i
at 1 kPa
n 0
1.38510
298.15
Bubble Temperature Measurements on the Binary Mixtures of n-Heptane or Nitrobenzene or Chlorobenzene with Some Chloroethanes and Chloroethylenes at (94.6 to 95.8) kPa i
at 1 kPa
n 0
1.38530
298.15
Isobaric Vapor-Liquid Equilibria and Excess Properties for the Binary Systems of Methyl Esters + Heptane i
at 1 kPa
n 0
1.38510
298.15
Bubble-Temperature Measurements on Some Binary Mixtures Formed by Tetrahydrofuran or Amyl Alcohol with Hydrocarbons, Chlorohydrocarbons, or Butanols at (94.6 or 95.8) kPa i
at 1 kPa
n 0
1.38529
298.15
Capacity of two 1-butyl-1-methylpyrrolidinium-based ionic liquidsfor the extraction of ethanol from its mixtures with heptane and hexane i
at 1 kPa
n 0
1.38540
298.15
Solubilities of Bis (2,2,6,6-Tetramethyl-4-Piperidinyl) Maleate in Hexane, Heptane, Octane, m-Xylene and Tetrahydrofuran from (253.15 to 310.15) K i
at 1 kPa
n 0
1.38530
298.15
Activity Coefficients at Infinite Dilution of Cylcohexylamine + Octane, Toluene, Ethylbenzene, or Aniline and Excess Molar Volumes in Binary Mixtures of Cyclohexylamine + Heptane, Octane, Nonane, Decane, Undecane, Aniline, or Water i
at 1 kPa
n 0
1.38517
298.15
Thiophene separation from aliphatic hydrocarbons using the 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid i
at 1 kPa
n 0
1.38530
298.15
Liquid-Liquid(-Liquid) Equilibria in Ternary Systems of Water + Cyclohexylamine + Aromatic Hydrocarbon (Toluene or Propylbenzene) or Aliphatic Hydrocarbon (Heptane or Octane) i
at 1 kPa
n 0
1.38530
298.15
Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Heptane and Diethyl Sulfide + 2,2,4-Trimethylpentane at (363.15 and 353.15) K i
at 1 kPa
n 0
1.38500
298.20
Liquid-Liquid Equilibria for Ternary Mixtures (an Ionic Liquid + Benzene +Heptane or Hexadecane) at T ) 298.2 K and Atmospheric Pressure i
at 1 kPa
n 0
1.38510
298.20
(Liquid + liquid) equilibria of aqueous solutions of butyric acid with n-heptane and toluene at T = (298.2, 308.2, and 318.2) K i
at 1 kPa
n 0
1.38259
303.15
Experimental Determination of Densities and Refractive Indices of the Ternary Mixture 2-Methyl-2-propanol + Cyclohexylamine + n-Heptane at T = (303.15 to 323.15) K
n 0
1.38270
303.15
Physical properties of {anisole + n-alkanes} at temperatures between (293.15 and 303.15) K
n 0
1.38360
303.15
Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K
n 0
1.38258
303.15
Mixing properties of binary mixtures presenting azeotropes at several temperatures
n 0
1.38261
303.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
n 0
1.38440
303.15
(Liquid + liquid) equilibria measurements for ternary systems (sulfolane + a carboxylic acid + n-heptane) at T = 303.15 K and at 0.1 MPa i
at 1 kPa
n 0
1.38100
308.15
Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K
n 0
1.38001
308.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
n 0
1.37995
308.15
Experimental Determination of Densities and Refractive Indices of the Ternary Mixture 2-Methyl-2-propanol + Cyclohexylamine + n-Heptane at T = (303.15 to 323.15) K
n 0
1.37731
313.15
Experimental Determination of Densities and Refractive Indices of the Ternary Mixture 2-Methyl-2-propanol + Cyclohexylamine + n-Heptane at T = (303.15 to 323.15) K
n 0
1.37735
313.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
n 0
1.37480
318.15
Thermodynamic properties of (an ester + an alkane). XVI. Experimental HEm and V Em values and a new correlation method for (an alkyl ethanoate + an n-alkane) at 318.15 K i
at 1 kPa
n 0
1.37480
318.15
Multiproperty Correlation of Experimental Data of the Binaries Propyl Ethanoate + Alkanes (Pentane to Decane). New Experimental Information for Vapor Liquid Equilibrium and Mixing Properties
n 0
1.37463
318.15
Experimental Determination of Densities and Refractive Indices of the Ternary Mixture 2-Methyl-2-propanol + Cyclohexylamine + n-Heptane at T = (303.15 to 323.15) K
n 0
1.37197
323.15
Experimental Determination of Densities and Refractive Indices of the Ternary Mixture 2-Methyl-2-propanol + Cyclohexylamine + n-Heptane at T = (303.15 to 323.15) K
ρl
[626.26; 700.75]
kg/m3
[273.15; 358.15]
ρl
700.67
kg/m3
273.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
700.75
kg/m3
273.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
696.30
kg/m3
278.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
696.57
kg/m3
278.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
696.59
kg/m3
278.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
692.40
kg/m3
283.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
692.20
kg/m3
283.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
692.44
kg/m3
283.15
Density, viscosity and excess molar volume of binary mixtures of tri-n-octylamine + diluents (n-heptane, n-octane, n-nonane, and n-decane) at various temperatures
ρl
692.42
kg/m3
283.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
ρl
692.42
kg/m3
283.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
688.22
kg/m3
288.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
688.13
kg/m3
288.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
688.25
kg/m3
288.15
Excess molar enthalpies of diethyl malonate+ (1-butanol, 2-methyl-1-propanol, 1-pentanol, n-heptane, and ethyl acetate) at T= (288.2, 298.2, 313.2, 328.2, 338.2, and 348.2 K) and p = 101.3 kPa
ρl
688.59
kg/m3
288.15
Excess molar volumes of (1-chlorobutane +heptane + 2-butanone or 2-pentanone) at 288.15 , 303.15 and 313.15 K . Measurements and correlations.
ρl
687.98
kg/m3
288.15
Density and Surface Tension Variation with Temperature for Heptane + 1-Alkanol
ρl
688.28
kg/m3
288.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
ρl
688.10
kg/m3
288.15
Densities and Viscosities of Binary Mixtures of Tri-n-butyl Phosphate + Cyclohexane, + n-Heptane at T ) (288.15, 293.15, 298.15, 303.15, and 308.15) K
ρl
687.95
kg/m3
288.15
Densities and Excess Molar Volumes of 2-Butanol + Cyclohexanamine + Heptane and 2-Butanol + n-Heptane at Temperatures between (288.15 and 323.15) K
ρl
687.95
kg/m3
288.15
Experimental determination and modelling of densities and excess molar volumes of ternary system (1-butanol + cyclohexylamine + n-heptane) and corresponding binaries from 288.15 to 323.15K
ρl
688.16
kg/m3
288.15
Improvements in the Experimentation and the Representation of Thermodynamic Properties (iso-p VLE and yE) of Alkyl Propanoate + Alkane Binaries
ρl
689.00
kg/m3
288.15
Effect of temperature on intermolecular interactions between the organic solvents: Insights from density and excess volume
ρl
688.20
kg/m3
288.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
688.00
kg/m3
288.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
688.16
kg/m3
288.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
ρl
688.16
kg/m3
288.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
ρl
688.03
kg/m3
288.15
Permittivity and density of the systems (monoglyme, diglyme, triglyme, or tetraglyme + n-heptane) at several temperatures
ρl
685.59
kg/m3
291.15
Solutions of alkyl methanoates and alkanes: Simultaneous modeling of phase equilibria and mixing properties. Estimation of behavior by UNIFAC with recalculation of parameters
ρl
685.28
kg/m3
291.15
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
ρl
685.30
kg/m3
291.15
Multiproperty Correlation of Experimental Data of the Binaries Propyl Ethanoate + Alkanes (Pentane to Decane). New Experimental Information for Vapor Liquid Equilibrium and Mixing Properties
ρl
684.18
kg/m3
292.70
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
ρl
684.00
kg/m3
293.00
KDB
ρl
683.96
kg/m3
293.15
Physical properties of {anisole + n-alkanes} at temperatures between (293.15 and 303.15) K
ρl
684.00
kg/m3
293.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
684.00
kg/m3
293.15
Densities and Kinematic Viscosities of a Quinary Regular Liquid System and Its Five Quaternary Subsystems at 293.15A K and 298.15A K
ρl
696.00
kg/m3
293.15
Surface Properties of Dilute Solutions of Alkanes in Benzyl Alcohol
ρl
687.14
kg/m3
293.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
ρl
683.70
kg/m3
293.15
Mixing properties of binary mixtures presenting azeotropes at several temperatures
ρl
683.79
kg/m3
293.15
Limiting Activity Coefficients by Comparative Tensimetry: 1-Propanol and 1-Butanol in Heptane and in Octane i
at 1 kPa
ρl
683.60
kg/m3
293.15
Densities and Excess Molar Properties of Dimethyl Carbonate with Alkanes (C6 to C10) and VLE of Dimethyl Carbonate with Alkanes (C9 to C10) at 101.3 kPa
ρl
683.50
kg/m3
293.15
Infinite Dilution Activity Coefficients of Hydrocarbons in Triethylene Glycol and Tetraethylene Glycol i
at 1 kPa
ρl
683.73
kg/m3
293.15
Densities and Excess Molar Volumes of 2-Butanol + Cyclohexanamine + Heptane and 2-Butanol + n-Heptane at Temperatures between (288.15 and 323.15) K
ρl
683.91
kg/m3
293.15
Excess Molar Enthalpies for Binary Mixtures of Ethanol + Acetone, + Octane, + Cyclohexane and 1-Propanol + Acetone, + Octane, + Heptane at 323.15 i
at 1 kPa
ρl
683.80
kg/m3
293.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
683.82
kg/m3
293.15
Thermophysical and Acoustical Properties of the Binary Mixtures 1,2-Dibromoethane + Heptane within the Temperature Range from 293.15 K to 313.15 K
ρl
683.79
kg/m3
293.15
Thermodynamic and Acoustic Properties of Mixtures of 1,6-Dichlorohexane with Heptane from (293 to 313) K
ρl
683.84
kg/m3
293.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
ρl
683.65
kg/m3
293.15
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
683.67
kg/m3
293.15
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
683.93
kg/m3
293.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
683.85
kg/m3
293.15
Thermodynamics of Mixtures Containing Amines. XII. Volumetric and Speed of Sound Data at (293.15, 298.15, and 303.15) K for N-Methylaniline + Hydrocarbon Systems
ρl
683.99
kg/m3
293.15
Excess Molar Volumes and Viscosities of Binary Systems of Butylcyclohexane with n-Alkanes (C7 to C14) at T = 293.15 K to 313.15 K
ρl
683.85
kg/m3
293.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
ρl
683.78
kg/m3
293.15
Density and Surface Tension Variation with Temperature for Heptane + 1-Alkanol
ρl
684.05
kg/m3
293.15
Density, viscosity and excess molar volume of binary mixtures of tri-n-octylamine + diluents (n-heptane, n-octane, n-nonane, and n-decane) at various temperatures
ρl
683.99
kg/m3
293.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
683.89
kg/m3
293.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
ρl
682.80
kg/m3
293.15
Densities and Viscosities of Ternary Mixtures of Heptane, Octane, Nonane, and Hexyl Benzene from 293.15 K to 313.15 K
ρl
684.06
kg/m3
293.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
ρl
683.81
kg/m3
293.15
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
ρl
683.80
kg/m3
293.15
Densities and Viscosities of Binary Mixtures of Tri-n-butyl Phosphate + Cyclohexane, + n-Heptane at T ) (288.15, 293.15, 298.15, 303.15, and 308.15) K
ρl
683.73
kg/m3
293.15
Experimental determination and modelling of densities and excess molar volumes of ternary system (1-butanol + cyclohexylamine + n-heptane) and corresponding binaries from 288.15 to 323.15K
ρl
683.80
kg/m3
293.15
Isothermal vapour-liquid equilibrium data for the binary systems of (CHF3 or C2F6) and n-heptane
ρl
685.00
kg/m3
293.15
Effect of temperature on intermolecular interactions between the organic solvents: Insights from density and excess volume
ρl
683.80
kg/m3
293.15
Bubble points of some binary mixtures formed by o-cresol at 95.75 kPa i
at 1 kPa
ρl
683.78
kg/m3
293.15
Surface tension and density of mixtures of m-xylene + n-alkane at 293.15 K: Analysis under the extended Langmuir and Shereshefsky models i
at 1 kPa
ρl
683.80
kg/m3
293.15
Thermodynamic and acoustic properties of (heptane + dodecane) mixtures under elevated pressures
ρl
683.53
kg/m3
293.20
Isobaric vapour liquid equilibria for binary mixtures of n-heptane with bromobenzene, chlorobenzene and fluorobenzene at atmospheric pressure i
at 1 kPa
ρl
684.10
kg/m3
293.20
Liquid phase equilibria for mixtures of (an aliphatic hydrocarbon + toluene + gamma-butyrolactone) i
at 1 kPa
ρl
683.82
kg/m3
293.22
Thermodynamic and acoustic properties of binary mixtures of alcohols and alkanes. II. Density and heat capacity of (ethanol + n-heptane) under elevated pressures
ρl
681.60
kg/m3
295.15
Isothermal vapour-liquid equilibrium data for the binary systems of (CHF3 or C2F6) and n-heptane
ρl
679.90
kg/m3
297.15
Isothermal vapour-liquid equilibrium data for the binary systems of (CHF3 or C2F6) and n-heptane
ρl
679.88
kg/m3
297.98
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
ρl
683.90
kg/m3
298.10
Excess Enthalpies and Thermal Conductivity Coefficients for Binary Mixtures of Carbon Tetrachloride and Four Alkanes (C5 to C8) at a Temperature of 298.15 K i
at 1 kPa
ρl
679.56
kg/m3
298.15
Extraction of Benzene from Aliphatic Compounds Using Commercial Ionic Liquids as Solvents: Study of the Liquid Liquid Equilibrium at T = 298.15 K i
at 1 kPa
ρl
678.93
kg/m3
298.15
Excess volumes, densities, speeds of sound and viscosities for the binary systems of diisopropyl ether with hydrocarbons at 303.15K i
at 1 kPa
ρl
679.72
kg/m3
298.15
Volumetric and Viscous Properties at Several Temperatures for Binary Mixtures of N-Methylpiperazine with Methylcyclohexane or n-Heptane
ρl
679.50
kg/m3
298.15
Mixing properties of binary mixtures presenting azeotropes at several temperatures
ρl
679.63
kg/m3
298.15
Thermodynamics of Mixtures Containing a Strongly Polar Compound. 9. Liquid-Liquid Equilibria for epsilon-Caprolactam + Selected Alkanes i
at 1 kPa
ρl
679.47
kg/m3
298.15
Solvent extraction of thiophene from n-alkanes (C7, C12, and C16) using the ionic liquid [C8mim][BF4] i
at 1 kPa
ρl
679.49
kg/m3
298.15
Densities and Excess Molar Volumes of 2-Butanol + Cyclohexanamine + Heptane and 2-Butanol + n-Heptane at Temperatures between (288.15 and 323.15) K
ρl
679.70
kg/m3
298.15
Densities and Kinematic Viscosities of a Quinary Regular Liquid System and Its Five Quaternary Subsystems at 293.15A K and 298.15A K
ρl
679.54
kg/m3
298.15
Thermodynamic study of 1,1,2,2-tetrachloroethane + hydrocarbon mixtures I. Excess and solvation enthalpies i
at 1 kPa
ρl
679.70
kg/m3
298.15
Densities and Viscosities of Binary Mixtures of Tri-n-butyl Phosphate + Cyclohexane, + n-Heptane at T ) (288.15, 293.15, 298.15, 303.15, and 308.15) K
ρl
679.54
kg/m3
298.15
Experimental and theoretical study of surface tension of binary mixtures of (n-alkyl acetates + heptane, benzene, and toluene) i
at 1 kPa
ρl
679.53
kg/m3
298.15
Molar heat capacities for (2-methyl-2-butanol + heptane) mixtures and cyclopentanol at temperatures from (284 to 353) K i
at 1 kPa
ρl
680.00
kg/m3
298.15
Phase diagrams of (hexane + methanol + 2,2,2-trifluoroethanol) at three temperatures: Measurement and correlation i
at 1 kPa
ρl
679.55
kg/m3
298.15
Thermodynamic properties of solvation of aromatic compounds in cyclohexane, heptane, benzene, 1,4-dioxane, and chloroform at 298.15 K i
at 1 kPa
ρl
679.63
kg/m3
298.15
Thermodynamics of mixtures containing amines VI. Liquid liquid equilibria for mixtures of o-toluidine + selected alkanes i
at 1 kPa
ρl
679.58
kg/m3
298.15
Permittivity and density of the systems (monoglyme, diglyme, triglyme, or tetraglyme + n-heptane) at several temperatures
ρl
679.47
kg/m3
298.15
Phase behaviour of 1-methyl-3-octylimidazolium bis[trifluoromethylsulfonyl]imide with thiophene and aliphatic hydrocarbons: The influence of n-alkane chain length i
at 1 kPa
ρl
679.56
kg/m3
298.15
Extraction of toluene from aliphatic compounds using an ionic liquid as solvent: Influence of the alkane on the (liquid + liquid) equilibrium i
at 1 kPa
ρl
679.57
kg/m3
298.15
Application of [HMim][NTf2], [HMim][TfO] and [BMim][TfO] ionic liquids on the extraction of toluene from alkanes: Effect of the anion and the alkyl chain length of the cation on the LLE i
at 1 kPa
ρl
679.57
kg/m3
298.15
1-Alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids as solvents in the separation of azeotropic mixtures i
at 1 kPa
ρl
679.71
kg/m3
298.15
Thermodynamics of mixtures containing amines. XI. Liquid + liquid equilibria and molar excess enthalpies at 298.15 K for N-methylaniline + hydrocarbon systems. Characterization in terms of DISQUAC and ERAS models i
at 1 kPa
ρl
679.91
kg/m3
298.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
ρl
680.00
kg/m3
298.15
Effect of Temperature on Phase Equilibrium of the Mixed-Solvent System of (2,2,2-Trifluoroethanol + Methanol + Cyclohexane) i
at 1 kPa
ρl
680.00
kg/m3
298.15
Liquid-Liquid Equilibrium of (Cyclohexane + 2,2,2-Trifluoroethanol) and (Cyclohexane + Methanol) from (278.15 to 318.15) K i
at 1 kPa
ρl
679.50
kg/m3
298.15
A study on the liquid liquid equilibria of 1-alkyl-3-methylimidazolium hexafluorophosphate with ethanol and alkanes i
at 1 kPa
ρl
678.60
kg/m3
298.15
Densities and Viscosities of Ternary Mixtures of Heptane, Octane, Nonane, and Hexyl Benzene from 293.15 K to 313.15 K
ρl
679.47
kg/m3
298.15
Thiophene separation from aliphatic hydrocarbons using the 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid i
at 1 kPa
ρl
679.57
kg/m3
298.15
Application of 1-alkyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide ionic liquids for the ethanol removal from its mixtures with alkanes i
at 1 kPa
ρl
679.60
kg/m3
298.15
Cation effect of ammonium imide based ionic liquids in alcohols extraction from alcohol-alkane azeotropic mixtures i
at 1 kPa
ρl
679.75
kg/m3
298.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
679.60
kg/m3
298.15
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
ρl
679.79
kg/m3
298.15
Excess molar enthalpies of diethyl malonate+ (1-butanol, 2-methyl-1-propanol, 1-pentanol, n-heptane, and ethyl acetate) at T= (288.2, 298.2, 313.2, 328.2, 338.2, and 348.2 K) and p = 101.3 kPa
ρl
679.78
kg/m3
298.15
Density, viscosity and excess molar volume of binary mixtures of tri-n-octylamine + diluents (n-heptane, n-octane, n-nonane, and n-decane) at various temperatures
ρl
679.48
kg/m3
298.15
Separation of sulfur compounds from alkanes with 1-alkylcyanopyridinium-based ionic liquids i
at 1 kPa
ρl
679.54
kg/m3
298.15
Effect of the alkyl side chain of the 1-alkylpiperidinium-based ionic liquids on desulfurization of fuels i
at 1 kPa
ρl
679.57
kg/m3
298.15
Quaternary (liquid + liquid) equilibrium data for the extraction of toluene from alkanes using the ionic liquid [EMim][MSO4] i
at 1 kPa
ρl
679.54
kg/m3
298.15
Extraction desulfurization process of fuels with ionic liquids i
at 1 kPa
ρl
679.57
kg/m3
298.15
(Liquid + liquid) equilibrium of ternary and quaternary systems containing heptane, cyclohexane, toluene and the ionic liquid [EMim][N(CN)2]. Experimental data and correlation i
at 1 kPa
ρl
680.02
kg/m3
298.15
Binary Liquid Liquid Equilibria of ?-Valerolactone with Some Hydrocarbons i
at 1 kPa
ρl
679.61
kg/m3
298.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
ρl
679.10
kg/m3
298.15
Isothermal vapour-liquid equilibrium data for the binary systems of (CHF3 or C2F6) and n-heptane
ρl
679.70
kg/m3
298.15
Measurement of VLE Data by Using an Experimental Installation with Automatic Control: Modeling of Binary Systems of Methyl Acetate or Ethyl Acetate with n-Heptane or 2,2,4-Trimethylpentane at Both 0.1 and 1.5 MPa i
at 1 kPa
ρl
679.40
kg/m3
298.15
Viscosities of Dimethyl Carbonate or Diethyl Carbonate with Alkanes at Four Temperatures. New UNIFAC-VISCO Parameters i
at 1 kPa
ρl
679.50
kg/m3
298.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
679.69
kg/m3
298.15
Excess molar volumes of the ternary system {methylcyclohexane (1) + cyclohexane (2) + n-alkanes (3)} at T = 298.15 K i
at 1 kPa
ρl
679.50
kg/m3
298.15
Fully automatized apparatus for determining speed of sound for liquids in the temperature and pressure interval (283.15-343.15) K and (0.1-95) MPa i
at 1 kPa
ρl
679.62
kg/m3
298.15
Improvements in the Experimentation and the Representation of Thermodynamic Properties (iso-p VLE and yE) of Alkyl Propanoate + Alkane Binaries
ρl
679.46
kg/m3
298.15
Conformational analysis of branched alkanes using limiting partial molar volumes i
at 1 kPa
ρl
679.57
kg/m3
298.15
Capacity of two 1-butyl-1-methylpyrrolidinium-based ionic liquidsfor the extraction of ethanol from its mixtures with heptane and hexane i
at 1 kPa
ρl
679.74
kg/m3
298.15
Excess Molar Volumes and Viscosities of Binary Systems of Butylcyclohexane with n-Alkanes (C7 to C14) at T = 293.15 K to 313.15 K
ρl
680.00
kg/m3
298.15
Effect of temperature on intermolecular interactions between the organic solvents: Insights from density and excess volume
ρl
683.80
kg/m3
298.15
Liquid-liquid equilibria for multicomponent mixtures of 2,2-dimethyl-1,3-dioxolane with n-heptane, toluene, ethanol and water i
at 1 kPa
ρl
679.54
kg/m3
298.15
Excess Enthalpy and Excess Volume for Pyridine + Methyldiethanolamine and Pyridine + Ethanolamine Mixtures i
at 1 kPa
ρl
679.60
kg/m3
298.15
Thermodynamics of Mixtures Containing Amines. XII. Volumetric and Speed of Sound Data at (293.15, 298.15, and 303.15) K for N-Methylaniline + Hydrocarbon Systems
ρl
679.55
kg/m3
298.15
Phase behaviour of tricyanomethanide-based ionic liquids with alcohols and hydrocarbons i
at 1 kPa
ρl
679.60
kg/m3
298.15
Vapour liquid equilibrium at T = 308.15 K for binary systems: Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + dibromomethane, bromotrichloromethane + bromochloromethane and dibromomethane + bromochloromethane. Experimental data and modelling i
at 1 kPa
ρl
679.71
kg/m3
298.15
Liquid-liquid equilibria for (2-hydroxy benzaldehyde + n-alkane) mixtures. Intermolecular and proximity effects in systems containing hydroxyl and aldehyde groups i
at 1 kPa
ρl
679.00
kg/m3
298.15
Liquid-Liquid Equilibrium Data for Ternary Systems Containing Alkanes (n-Pentane, n-Hexane, n-Heptane, and n-Octane) + Alcohol (Methanol and Ethanol) + Protic Ionic Liquid (2-HEAF) i
at 1 kPa
ρl
679.50
kg/m3
298.15
Multiproperty Correlation of Experimental Data of the Binaries Propyl Ethanoate + Alkanes (Pentane to Decane). New Experimental Information for Vapor Liquid Equilibrium and Mixing Properties
ρl
679.49
kg/m3
298.15
Topological and thermodynamic investigations of binary mixtures: Molar excess volumes, molar excess enthalpies and isentropic compressibility changes of mixing i
at 1 kPa
ρl
679.62
kg/m3
298.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
ρl
679.62
kg/m3
298.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
ρl
679.49
kg/m3
298.15
Experimental determination and modelling of densities and excess molar volumes of ternary system (1-butanol + cyclohexylamine + n-heptane) and corresponding binaries from 288.15 to 323.15K
ρl
679.48
kg/m3
298.15
Separation of pyridine from heptane with tricyanomethanide-based ionic liquids i
at 1 kPa
ρl
679.66
kg/m3
298.15
Solutions of alkyl methanoates and alkanes: Simultaneous modeling of phase equilibria and mixing properties. Estimation of behavior by UNIFAC with recalculation of parameters i
at 1 kPa
ρl
679.60
kg/m3
298.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
ρl
679.71
kg/m3
298.15
Thermodynamics of Mixtures Containing Aromatic Alcohols. 1. Liquid Liquid Equilibria for (Phenylmethanol + Alkane) Systems i
at 1 kPa
ρl
679.66
kg/m3
298.15
Thermodynamic and acoustic properties of binary mixtures of alcohols and alkanes. I. Speed of sound in (ethanol + n-heptane) under elevated pressures i
at 1 kPa
ρl
679.49
kg/m3
298.15
Excess molar volumes and isentropic compressibilities changes of mixing of tetrahydropyran + benzene + cyclo or n-alkanes ternary mixtures at 308.15 K i
at 1 kPa
ρl
679.55
kg/m3
298.15
Vapor-Liquid Equilibrium in the Binary Systems 2-Butanol + tert-Amyl Methyl Ether, 2-Butanol + Heptane, and Heptane + tert-Amyl Methyl Ether i
at 1 kPa
ρl
679.48
kg/m3
298.15
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
ρl
679.43
kg/m3
298.15
Liquid-Liquid(-Liquid) Equilibria in Ternary Systems of Aliphatic Hydrocarbons (Heptane or Octane) + Phenols + Water i
at 1 kPa
ρl
679.78
kg/m3
298.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
ρl
679.69
kg/m3
298.15
Excess molar volumes and dynamic viscosities for binary mixtures of toluene + n-alkanes (C5 C10) at T = 298.15 K Comparison with Prigogine Flory Patterson theory i
at 1 kPa
ρl
679.56
kg/m3
298.15
Thermodynamic and Acoustic Properties of Mixtures of 1,6-Dichlorohexane with Heptane from (293 to 313) K
ρl
683.80
kg/m3
298.15
Liquid-liquid equilibria for ternary mixtures of 2,2-dimethyl-1,3-dioxolane-4-methanol with n-heptane, toluene, ethanol and water i
at 1 kPa
ρl
679.56
kg/m3
298.15
Separation of Benzene from Linear Alkanes (C6-C9) Using 1-Ethyl-3-Methylimidazolium Ethylsulfate at T = 298.15 K i
at 1 kPa
ρl
679.59
kg/m3
298.15
Thermophysical and Acoustical Properties of the Binary Mixtures 1,2-Dibromoethane + Heptane within the Temperature Range from 293.15 K to 313.15 K
ρl
679.50
kg/m3
298.15
Bubble Temperature Measurements on the Binary Mixtures of n-Heptane or Nitrobenzene or Chlorobenzene with Some Chloroethanes and Chloroethylenes at (94.6 to 95.8) kPa i
at 1 kPa
ρl
679.51
kg/m3
298.15
Solvation of N-methyl-2-pyrrolidone and N,N-dimethylpropanamide in cyclohexane, heptane, n-alkan-1-ols(C1-C4) and water at 298.15K i
at 1 kPa
ρl
679.75
kg/m3
298.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
679.64
kg/m3
298.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
ρl
679.55
kg/m3
298.15
Density and Surface Tension Variation with Temperature for Heptane + 1-Alkanol
ρl
681.48
kg/m3
298.15
Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization i
at 1 kPa
ρl
679.43
kg/m3
298.15
Liquid-Liquid(-Liquid) Equilibria in Ternary Systems of Water + Cyclohexylamine + Aromatic Hydrocarbon (Toluene or Propylbenzene) or Aliphatic Hydrocarbon (Heptane or Octane) i
at 1 kPa
ρl
679.63
kg/m3
298.15
Thermodynamics of Mixtures Containing a Strongly Polar Compound. 8. Liquid-Liquid Equilibria for N,N-Dialkylamide + Selected N-Alkanes i
at 1 kPa
ρl
679.43
kg/m3
298.15
Activity Coefficients at Infinite Dilution of Cylcohexylamine + Octane, Toluene, Ethylbenzene, or Aniline and Excess Molar Volumes in Binary Mixtures of Cyclohexylamine + Heptane, Octane, Nonane, Decane, Undecane, Aniline, or Water
ρl
691.90
kg/m3
298.15
Surface Properties of Dilute Solutions of Alkanes in Benzyl Alcohol
ρl
679.50
kg/m3
298.15
Vapor-Liquid Equilibria for the Ternary Systems of Methyl tert-Butyl Ether + Methanol + Methylcyclohexane and Methyl tert-Butyl Ether + Methanol + n-Heptane and Constituent Binary Systems at 313.15 K i
at 1 kPa
ρl
679.71
kg/m3
298.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
679.54
kg/m3
298.15
Thermodynamics of Mixtures Containing Ethers. Part III. Liquid-Liquid Equilibria for 2,5,8,11-Tetraoxadodecane or 2,5,8,11,14-Pentaoxapentadecane + Selected N-Alkanes i
at 1 kPa
ρl
682.91
kg/m3
298.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
ρl
690.60
kg/m3
298.15
Ternary (liquid + liquid) equilibria for mixtures of 1-hexyl-3-methylimidazolium (tetrafluoroborate or hexafluorophosphate) + benzene + an alkane at T = 298.2 K and p = 0.1 MPa i
at 1 kPa
ρl
679.90
kg/m3
298.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
ρl
679.50
kg/m3
298.15
Vapor-Liquid Equilibrium Data for the Binary Decafluoropentane (HFC-43-10meec) + Heptane, Decafluoropentane + Butyl Ethyl Ether, Octafluorobutane (HFC-338pcc) + Butyl Ethyl Ether, and Heptafluoro Propyl Methyl Ether (HFE-347mcc) + HFC-338pcc Systems at 101.3 kPa i
at 1 kPa
ρl
679.40
kg/m3
298.15
Solubilities of Bis (2,2,6,6-Tetramethyl-4-Piperidinyl) Maleate in Hexane, Heptane, Octane, m-Xylene and Tetrahydrofuran from (253.15 to 310.15) K i
at 1 kPa
ρl
679.77
kg/m3
298.15
Physical properties of {anisole + n-alkanes} at temperatures between (293.15 and 303.15) K
ρl
680.17
kg/m3
298.15
Excess Enthalpies of Binary Mixtures of 1-Hexene with Some n-Alkanes at 298.15 K i
at 1 kPa
ρl
679.40
kg/m3
298.15
Densities and Excess Molar Properties of Dimethyl Carbonate with Alkanes (C6 to C10) and VLE of Dimethyl Carbonate with Alkanes (C9 to C10) at 101.3 kPa
ρl
679.70
kg/m3
298.15
Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K
ρl
679.30
kg/m3
298.15
Isobaric Vapor-Liquid Equilibria and Excess Properties for the Binary Systems of Methyl Esters + Heptane i
at 1 kPa
ρl
679.50
kg/m3
298.15
Bubble-Temperature Measurements on Some Binary Mixtures Formed by Tetrahydrofuran or Amyl Alcohol with Hydrocarbons, Chlorohydrocarbons, or Butanols at (94.6 or 95.8) kPa i
at 1 kPa
ρl
679.55
kg/m3
298.15
Thermodynamic and acoustic properties of (heptane + dodecane) mixtures under elevated pressures
ρl
679.75
kg/m3
298.16
Thermodynamic and acoustic properties of binary mixtures of alcohols and alkanes. II. Density and heat capacity of (ethanol + n-heptane) under elevated pressures
ρl
682.30
kg/m3
298.20
Ternary Liquid-Liquid Equilibria for Mixtures of 1-Methyl-3-octylimidazolium Chloride + an Alkanol + an Alkane at 298.2 K and 1 bar i
at 1 kPa
ρl
679.86
kg/m3
298.20
Apparent and Partial Molar Volumes at Infinite Dilution and Solid Liquid Equilibria of Dibenzothiophene + Alkane Systems i
at 1 kPa
ρl
679.52
kg/m3
298.20
Isobaric vapor-liquid equilibrium for binary systemsof toluene + o-xylene, benzene + o-xylene, nonane + benzene and nonane + heptane at 101.3 kPa i
at 1 kPa
ρl
679.49
kg/m3
298.20
(Liquid + liquid) equilibria of aqueous solutions of butyric acid with n-heptane and toluene at T = (298.2, 308.2, and 318.2) K i
at 1 kPa
ρl
677.10
kg/m3
300.40
Isothermal vapour-liquid equilibrium data for the binary systems of (CHF3 or C2F6) and n-heptane
ρl
675.75
kg/m3
301.62
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
675.96
kg/m3
301.62
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
675.72
kg/m3
302.94
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
ρl
675.29
kg/m3
303.15
Thermodynamic and acoustic properties of (heptane + dodecane) mixtures under elevated pressures
ρl
675.56
kg/m3
303.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
ρl
675.31
kg/m3
303.15
Thermophysical and Acoustical Properties of the Binary Mixtures 1,2-Dibromoethane + Heptane within the Temperature Range from 293.15 K to 313.15 K
ρl
675.46
kg/m3
303.15
Volumetric and Viscous Properties at Several Temperatures for Binary Mixtures of N-Methylpiperazine with Methylcyclohexane or n-Heptane
ρl
675.20
kg/m3
303.15
Mixing properties of binary mixtures presenting azeotropes at several temperatures
ρl
675.23
kg/m3
303.15
Densities and Excess Molar Volumes of 2-Butanol + Cyclohexanamine + Heptane and 2-Butanol + n-Heptane at Temperatures between (288.15 and 323.15) K
ρl
674.50
kg/m3
303.15
Density, Viscosity, and Speed of Sound of (Methyl Benzoate + Cyclohexane), (Methyl Benzoate + n-Hexane), (Methyl Benzoate + Heptane), and (Methyl Benzoate + Octane) at Temperatures of (303.15, 308.15, and 313.15) K
ρl
675.40
kg/m3
303.15
Densities and Viscosities of Binary Mixtures of Tri-n-butyl Phosphate + Cyclohexane, + n-Heptane at T ) (288.15, 293.15, 298.15, 303.15, and 308.15) K
ρl
675.63
kg/m3
303.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
ρl
674.70
kg/m3
303.15
Densities and Viscosities of Ternary Mixtures of Heptane, Octane, Nonane, and Hexyl Benzene from 293.15 K to 313.15 K
ρl
675.47
kg/m3
303.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
675.48
kg/m3
303.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
675.20
kg/m3
303.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
675.38
kg/m3
303.15
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
ρl
675.54
kg/m3
303.15
Density, viscosity and excess molar volume of binary mixtures of tri-n-octylamine + diluents (n-heptane, n-octane, n-nonane, and n-decane) at various temperatures
ρl
675.35
kg/m3
303.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
ρl
675.41
kg/m3
303.15
Excess Molar Volumes and Viscosities of Binary Systems of Butylcyclohexane with n-Alkanes (C7 to C14) at T = 293.15 K to 313.15 K
ρl
676.00
kg/m3
303.15
Effect of temperature on intermolecular interactions between the organic solvents: Insights from density and excess volume
ρl
675.53
kg/m3
303.15
Thermodynamics of Mixtures Containing Amines. XII. Volumetric and Speed of Sound Data at (293.15, 298.15, and 303.15) K for N-Methylaniline + Hydrocarbon Systems
ρl
674.38
kg/m3
303.15
Excess volumes, densities, speeds of sound and viscosities for the binary systems of diisopropyl ether with hydrocarbons at 303.15K i
at 1 kPa
ρl
675.23
kg/m3
303.15
Experimental determination and modelling of densities and excess molar volumes of ternary system (1-butanol + cyclohexylamine + n-heptane) and corresponding binaries from 288.15 to 323.15K
ρl
675.33
kg/m3
303.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
ρl
675.30
kg/m3
303.15
Thermodynamic and Acoustic Properties of Mixtures of 1,6-Dichlorohexane with Heptane from (293 to 313) K
ρl
675.23
kg/m3
303.15
Experimental Determination of Densities and Refractive Indices of the Ternary Mixture 2-Methyl-2-propanol + Cyclohexylamine + n-Heptane at T = (303.15 to 323.15) K
ρl
675.49
kg/m3
303.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
675.50
kg/m3
303.15
Physical properties of {anisole + n-alkanes} at temperatures between (293.15 and 303.15) K
ρl
678.61
kg/m3
303.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
ρl
675.30
kg/m3
303.15
Densities and Excess Molar Properties of Dimethyl Carbonate with Alkanes (C6 to C10) and VLE of Dimethyl Carbonate with Alkanes (C9 to C10) at 101.3 kPa
ρl
675.84
kg/m3
303.15
Excess molar volumes of (1-chlorobutane +heptane + 2-butanone or 2-pentanone) at 288.15 , 303.15 and 313.15 K . Measurements and correlations.
ρl
675.40
kg/m3
303.15
Effect of polarity and temperature on the binary interaction between D2EHPA extractant and organic solvents (kerosene, n-heptane, chlorobenzene and 1-octanol): Experimental and thermodynamics
ρl
675.65
kg/m3
303.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
ρl
675.30
kg/m3
303.15
Density and Surface Tension Variation with Temperature for Heptane + 1-Alkanol
ρl
675.37
kg/m3
303.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
ρl
675.32
kg/m3
303.15
Activity Coefficients at Infinite Dilution of Cylcohexylamine + Octane, Toluene, Ethylbenzene, or Aniline and Excess Molar Volumes in Binary Mixtures of Cyclohexylamine + Heptane, Octane, Nonane, Decane, Undecane, Aniline, or Water
ρl
675.40
kg/m3
303.15
Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K
ρl
675.51
kg/m3
303.17
Thermodynamic and acoustic properties of binary mixtures of alcohols and alkanes. II. Density and heat capacity of (ethanol + n-heptane) under elevated pressures
ρl
671.47
kg/m3
308.06
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
ρl
670.98
kg/m3
308.15
Solutions of alkyl methanoates and alkanes: Simultaneous modeling of phase equilibria and mixing properties. Estimation of behavior by UNIFAC with recalculation of parameters
ρl
671.02
kg/m3
308.15
Thermodynamic and Acoustic Properties of Mixtures of 1,6-Dichlorohexane with Heptane from (293 to 313) K
ρl
670.94
kg/m3
308.15
Experimental determination and modelling of densities and excess molar volumes of ternary system (1-butanol + cyclohexylamine + n-heptane) and corresponding binaries from 288.15 to 323.15K
ρl
671.04
kg/m3
308.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
ρl
671.20
kg/m3
308.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
670.30
kg/m3
308.15
Density, Viscosity, and Speed of Sound of (Methyl Benzoate + Cyclohexane), (Methyl Benzoate + n-Hexane), (Methyl Benzoate + Heptane), and (Methyl Benzoate + Octane) at Temperatures of (303.15, 308.15, and 313.15) K
ρl
670.96
kg/m3
308.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
ρl
670.90
kg/m3
308.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
671.30
kg/m3
308.15
Viscometric and Volumetric Properties of 10 Regular Binary Systems at 308.15 K and 313.15 K
ρl
670.94
kg/m3
308.15
Experimental Determination of Densities and Refractive Indices of the Ternary Mixture 2-Methyl-2-propanol + Cyclohexylamine + n-Heptane at T = (303.15 to 323.15) K
ρl
670.96
kg/m3
308.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
ρl
671.19
kg/m3
308.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
671.05
kg/m3
308.15
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
ρl
671.10
kg/m3
308.15
Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K
ρl
671.10
kg/m3
308.15
Densities and Viscosities of Binary Mixtures of Tri-n-butyl Phosphate + Cyclohexane, + n-Heptane at T ) (288.15, 293.15, 298.15, 303.15, and 308.15) K
ρl
671.33
kg/m3
308.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
ρl
671.05
kg/m3
308.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
ρl
670.96
kg/m3
308.15
Improvements in the Experimentation and the Representation of Thermodynamic Properties (iso-p VLE and yE) of Alkyl Propanoate + Alkane Binaries
ρl
671.03
kg/m3
308.15
Permittivity and density of the systems (monoglyme, diglyme, triglyme, or tetraglyme + n-heptane) at several temperatures
ρl
671.07
kg/m3
308.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
ρl
670.70
kg/m3
308.15
Densities and Viscosities of Ternary Mixtures of Heptane, Octane, Nonane, and Hexyl Benzene from 293.15 K to 313.15 K
ρl
671.19
kg/m3
308.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
671.02
kg/m3
308.15
Thermophysical and Acoustical Properties of the Binary Mixtures 1,2-Dibromoethane + Heptane within the Temperature Range from 293.15 K to 313.15 K
ρl
671.00
kg/m3
308.15
Density and Surface Tension Variation with Temperature for Heptane + 1-Alkanol
ρl
671.12
kg/m3
308.15
Excess Molar Volumes and Viscosities of Binary Systems of Butylcyclohexane with n-Alkanes (C7 to C14) at T = 293.15 K to 313.15 K
ρl
671.01
kg/m3
308.15
Thermodynamic and acoustic properties of (heptane + dodecane) mixtures under elevated pressures
ρl
671.27
kg/m3
308.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
ρl
670.94
kg/m3
308.15
Densities and Excess Molar Volumes of 2-Butanol + Cyclohexanamine + Heptane and 2-Butanol + n-Heptane at Temperatures between (288.15 and 323.15) K
ρl
671.21
kg/m3
308.17
Thermodynamic and acoustic properties of binary mixtures of alcohols and alkanes. II. Density and heat capacity of (ethanol + n-heptane) under elevated pressures
ρl
668.05
kg/m3
310.71
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
667.37
kg/m3
310.71
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
666.68
kg/m3
313.15
Thermodynamic and acoustic properties of (heptane + dodecane) mixtures under elevated pressures
ρl
680.00
kg/m3
313.15
Surface Properties of Dilute Solutions of Alkanes in Benzyl Alcohol
ρl
666.68
kg/m3
313.15
Thermophysical and Acoustical Properties of the Binary Mixtures 1,2-Dibromoethane + Heptane within the Temperature Range from 293.15 K to 313.15 K
ρl
666.78
kg/m3
313.15
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
ρl
668.00
kg/m3
313.15
Effect of temperature on intermolecular interactions between the organic solvents: Insights from density and excess volume
ρl
666.60
kg/m3
313.15
Densities and Excess Molar Properties of Dimethyl Carbonate with Alkanes (C6 to C10) and VLE of Dimethyl Carbonate with Alkanes (C9 to C10) at 101.3 kPa
ρl
666.62
kg/m3
313.15
Experimental Determination of Densities and Refractive Indices of the Ternary Mixture 2-Methyl-2-propanol + Cyclohexylamine + n-Heptane at T = (303.15 to 323.15) K
ρl
667.01
kg/m3
313.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
ρl
665.60
kg/m3
313.15
Densities and Viscosities of Ternary Mixtures of Heptane, Octane, Nonane, and Hexyl Benzene from 293.15 K to 313.15 K
ρl
666.91
kg/m3
313.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
ρl
665.84
kg/m3
313.15
Excess molar volumes of (1-chlorobutane +heptane + 2-butanone or 2-pentanone) at 288.15 , 303.15 and 313.15 K . Measurements and correlations.
ρl
666.80
kg/m3
313.15
Effect of polarity and temperature on the binary interaction between D2EHPA extractant and organic solvents (kerosene, n-heptane, chlorobenzene and 1-octanol): Experimental and thermodynamics
ρl
666.62
kg/m3
313.15
Densities and Excess Molar Volumes of 2-Butanol + Cyclohexanamine + Heptane and 2-Butanol + n-Heptane at Temperatures between (288.15 and 323.15) K
ρl
666.71
kg/m3
313.15
Thermodynamic and Acoustic Properties of Mixtures of 1,6-Dichlorohexane with Heptane from (293 to 313) K
ρl
666.92
kg/m3
313.15
Excess Molar Volumes and Viscosities of Binary Systems of Butylcyclohexane with n-Alkanes (C7 to C14) at T = 293.15 K to 313.15 K
ρl
666.89
kg/m3
313.15
Excess molar enthalpies of diethyl malonate+ (1-butanol, 2-methyl-1-propanol, 1-pentanol, n-heptane, and ethyl acetate) at T= (288.2, 298.2, 313.2, 328.2, 338.2, and 348.2 K) and p = 101.3 kPa
ρl
666.87
kg/m3
313.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
666.74
kg/m3
313.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
ρl
666.73
kg/m3
313.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
ρl
666.86
kg/m3
313.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
667.08
kg/m3
313.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
ρl
666.84
kg/m3
313.15
Volumetric and Viscous Properties at Several Temperatures for Binary Mixtures of N-Methylpiperazine with Methylcyclohexane or n-Heptane
ρl
669.91
kg/m3
313.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
ρl
667.20
kg/m3
313.15
Density, Viscosity, and Speed of Sound of (Methyl Benzoate + Cyclohexane), (Methyl Benzoate + n-Hexane), (Methyl Benzoate + Heptane), and (Methyl Benzoate + Octane) at Temperatures of (303.15, 308.15, and 313.15) K
ρl
666.62
kg/m3
313.15
Experimental determination and modelling of densities and excess molar volumes of ternary system (1-butanol + cyclohexylamine + n-heptane) and corresponding binaries from 288.15 to 323.15K
ρl
666.50
kg/m3
313.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
666.89
kg/m3
313.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
666.71
kg/m3
313.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
ρl
667.10
kg/m3
313.15
Viscometric and Volumetric Properties of 10 Regular Binary Systems at 308.15 K and 313.15 K
ρl
666.97
kg/m3
313.17
Thermodynamic and acoustic properties of binary mixtures of alcohols and alkanes. II. Density and heat capacity of (ethanol + n-heptane) under elevated pressures
ρl
666.39
kg/m3
314.10
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
ρl
662.32
kg/m3
318.15
Thermodynamic and acoustic properties of (heptane + dodecane) mixtures under elevated pressures
ρl
662.50
kg/m3
318.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
662.55
kg/m3
318.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
662.33
kg/m3
318.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
ρl
662.33
kg/m3
318.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
ρl
662.38
kg/m3
318.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
ρl
662.27
kg/m3
318.15
Experimental determination and modelling of densities and excess molar volumes of ternary system (1-butanol + cyclohexylamine + n-heptane) and corresponding binaries from 288.15 to 323.15K
ρl
662.52
kg/m3
318.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
662.10
kg/m3
318.15
Multiproperty Correlation of Experimental Data of the Binaries Propyl Ethanoate + Alkanes (Pentane to Decane). New Experimental Information for Vapor Liquid Equilibrium and Mixing Properties
ρl
662.06
kg/m3
318.15
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
ρl
662.30
kg/m3
318.15
Solutions of alkyl methanoates and alkanes: Simultaneous modeling of phase equilibria and mixing properties. Estimation of behavior by UNIFAC with recalculation of parameters
ρl
662.42
kg/m3
318.15
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
ρl
662.33
kg/m3
318.15
Improvements in the Experimentation and the Representation of Thermodynamic Properties (iso-p VLE and yE) of Alkyl Propanoate + Alkane Binaries
ρl
662.27
kg/m3
318.15
Experimental Determination of Densities and Refractive Indices of the Ternary Mixture 2-Methyl-2-propanol + Cyclohexylamine + n-Heptane at T = (303.15 to 323.15) K
ρl
662.65
kg/m3
318.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
ρl
661.50
kg/m3
318.15
Densities and Excess Molar Properties of Dimethyl Carbonate with Alkanes (C6 to C10) and VLE of Dimethyl Carbonate with Alkanes (C9 to C10) at 101.3 kPa
ρl
662.10
kg/m3
318.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
662.04
kg/m3
318.15
Thermodynamic properties of (an ester + an alkane). XVI. Experimental HEm and V Em values and a new correlation method for (an alkyl ethanoate + an n-alkane) at 318.15 K i
at 1 kPa
ρl
662.38
kg/m3
318.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
ρl
662.27
kg/m3
318.15
Densities and Excess Molar Volumes of 2-Butanol + Cyclohexanamine + Heptane and 2-Butanol + n-Heptane at Temperatures between (288.15 and 323.15) K
ρl
662.67
kg/m3
318.18
Thermodynamic and acoustic properties of binary mixtures of alcohols and alkanes. II. Density and heat capacity of (ethanol + n-heptane) under elevated pressures
ρl
660.16
kg/m3
319.85
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
659.85
kg/m3
319.85
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
657.90
kg/m3
323.15
Experimental determination and modelling of densities and excess molar volumes of ternary system (1-butanol + cyclohexylamine + n-heptane) and corresponding binaries from 288.15 to 323.15K
ρl
658.26
kg/m3
323.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
ρl
658.11
kg/m3
323.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
658.13
kg/m3
323.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
657.90
kg/m3
323.15
Densities and Excess Molar Volumes of 2-Butanol + Cyclohexanamine + Heptane and 2-Butanol + n-Heptane at Temperatures between (288.15 and 323.15) K
ρl
658.19
kg/m3
323.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
657.98
kg/m3
323.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
ρl
657.70
kg/m3
323.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
657.99
kg/m3
323.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
ρl
657.70
kg/m3
323.15
Effect of polarity and temperature on the binary interaction between D2EHPA extractant and organic solvents (kerosene, n-heptane, chlorobenzene and 1-octanol): Experimental and thermodynamics
ρl
660.00
kg/m3
323.15
Effect of temperature on intermolecular interactions between the organic solvents: Insights from density and excess volume
ρl
657.90
kg/m3
323.15
Experimental Determination of Densities and Refractive Indices of the Ternary Mixture 2-Methyl-2-propanol + Cyclohexylamine + n-Heptane at T = (303.15 to 323.15) K
ρl
661.16
kg/m3
323.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
ρl
658.37
kg/m3
323.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
ρl
653.68
kg/m3
328.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
653.61
kg/m3
328.15
Improvements in the Experimentation and the Representation of Thermodynamic Properties (iso-p VLE and yE) of Alkyl Propanoate + Alkane Binaries
ρl
653.79
kg/m3
328.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
653.60
kg/m3
328.15
Measurements of the Excess Properties and Vapor-Liquid Equilibria at 101.32 kPa for Mixtures of Ethyl Ethanoate + Alkanes (from C5 to C10)
ρl
653.71
kg/m3
328.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
653.57
kg/m3
328.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
ρl
653.61
kg/m3
328.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
ρl
653.61
kg/m3
328.15
Measurements and Correlations of the Isobaric Vapor Liquid Equilibria of Binary Mixtures and Excess Properties for Mixtures Containing an Alkyl (Methyl, Ethyl) Butanoate with an Alkane (Heptane, Nonane) at 101.3 kPa
ρl
653.70
kg/m3
328.15
Multiproperty Correlation of Experimental Data of the Binaries Propyl Ethanoate + Alkanes (Pentane to Decane). New Experimental Information for Vapor Liquid Equilibrium and Mixing Properties
ρl
653.72
kg/m3
328.15
Excess molar enthalpies of diethyl malonate+ (1-butanol, 2-methyl-1-propanol, 1-pentanol, n-heptane, and ethyl acetate) at T= (288.2, 298.2, 313.2, 328.2, 338.2, and 348.2 K) and p = 101.3 kPa
ρl
653.20
kg/m3
328.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
652.58
kg/m3
329.04
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
651.92
kg/m3
329.04
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
651.00
kg/m3
333.15
Effect of temperature on intermolecular interactions between the organic solvents: Insights from density and excess volume
ρl
649.33
kg/m3
333.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
652.26
kg/m3
333.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
ρl
648.40
kg/m3
333.15
Effect of polarity and temperature on the binary interaction between D2EHPA extractant and organic solvents (kerosene, n-heptane, chlorobenzene and 1-octanol): Experimental and thermodynamics
ρl
649.11
kg/m3
333.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
ρl
649.53
kg/m3
333.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
ρl
649.22
kg/m3
333.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
649.24
kg/m3
333.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
648.70
kg/m3
333.15
Surface Tension of Pure Liquids and Binary Liquid Mixtures
ρl
644.74
kg/m3
338.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
644.77
kg/m3
338.15
Excess molar enthalpies of diethyl malonate+ (1-butanol, 2-methyl-1-propanol, 1-pentanol, n-heptane, and ethyl acetate) at T= (288.2, 298.2, 313.2, 328.2, 338.2, and 348.2 K) and p = 101.3 kPa
ρl
644.84
kg/m3
338.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
644.72
kg/m3
338.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
644.60
kg/m3
338.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
ρl
644.32
kg/m3
338.26
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
644.01
kg/m3
338.26
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
640.17
kg/m3
343.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
640.47
kg/m3
343.15
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
ρl
643.31
kg/m3
343.15
Excess Molar Volumes and Viscosities of Binary Mixtures of Dimethyl Carbonate with Chlorobenzene, Hexane, and Heptane from (293.15 to 353.15) K and at Atmospheric Pressure
ρl
640.29
kg/m3
343.15
Densities and Viscosities of Corn Oil + n-Alkanes Blends from (288.15 to 343.15) K at 0.1 MPa
ρl
640.19
kg/m3
343.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
642.00
kg/m3
343.15
Effect of temperature on intermolecular interactions between the organic solvents: Insights from density and excess volume
ρl
635.57
kg/m3
347.53
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
635.91
kg/m3
347.53
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
635.60
kg/m3
348.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
635.63
kg/m3
348.15
Excess molar enthalpies of diethyl malonate+ (1-butanol, 2-methyl-1-propanol, 1-pentanol, n-heptane, and ethyl acetate) at T= (288.2, 298.2, 313.2, 328.2, 338.2, and 348.2 K) and p = 101.3 kPa
ρl
635.58
kg/m3
348.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
630.95
kg/m3
353.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
630.41
kg/m3
353.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
ρl
627.85
kg/m3
356.84
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
627.05
kg/m3
356.84
Density of Working Liquids for Diffusion Vacuum Pumps
ρl
626.26
kg/m3
358.15
Experimental measurements and prediction of liquid densities for n-alkane mixtures
ρl
626.34
kg/m3
358.15
Densities and Viscosities of MTBE + Heptane or Octane at p ) 0.1 MPa from (273.15 to 363.15) K
Δfus S
[76.81; 78.81]
J/mol×K
[182.20; 182.70]
Δfus S
77.73
J/mol×K
182.20
NIST Huffman, Parks, et al., 1930
Δfus S
77.73
J/mol×K
182.20
NIST Parks, Huffman, et al., 1930
Δfus S
76.93
J/mol×K
182.52
NIST Pitzer K.S., 1940
Δfus S
76.89
J/mol×K
182.55
NIST Huffman, Gross, et al., 1961
Δfus S
76.89
J/mol×K
182.55
NIST McCullough and Messerly, 1961
Δfus S
78.81
J/mol×K
182.56
NIST Douglas, Furukawa, et al., 1954
Δfus S
76.81
J/mol×K
182.56
NIST Ginnings and Furukawa, 1953
Δfus S
77.02
J/mol×K
182.56
NIST Van Miltenburg, 1972
Δfus S
76.81
J/mol×K
182.56
NIST Oetting F.L., 1963
Δfus S
76.96
J/mol×K
182.59
NIST Schaake, Offringa, et al., 1979
Δfus S
77.00
J/mol×K
182.70
NIST Meijer, Blok, et al., 1977
csound,fluid
[86.78; 1195.80]
m/s
[283.15; 536.15]
csound,fluid
1195.80
m/s
283.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
csound,fluid
1174.20
m/s
288.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
csound,fluid
1154.11
m/s
292.70
Thermodynamic and Acoustic Properties of Mixtures of 1,6-Dichlorohexane with Heptane from (293 to 313) K
csound,fluid
1153.67
m/s
292.84
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
csound,fluid
1151.92
m/s
293.13
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
csound,fluid
1152.60
m/s
293.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
csound,fluid
1151.70
m/s
293.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
csound,fluid
1150.90
m/s
293.15
Thermodynamics of Mixtures Containing Amines. XII. Volumetric and Speed of Sound Data at (293.15, 298.15, and 303.15) K for N-Methylaniline + Hydrocarbon Systems
csound,fluid
1152.70
m/s
293.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
csound,fluid
1152.20
m/s
293.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
csound,fluid
1153.00
m/s
293.15
Mixing properties of binary mixtures presenting azeotropes at several temperatures
csound,fluid
1131.06
m/s
298.00
Thermodynamic and Acoustic Properties of Mixtures of 1,6-Dichlorohexane with Heptane from (293 to 313) K
csound,fluid
1130.26
m/s
298.12
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
csound,fluid
1131.40
m/s
298.15
Solvation of N-methyl-2-pyrrolidone and N,N-dimethylpropanamide in cyclohexane, heptane, n-alkan-1-ols(C1-C4) and water at 298.15K i
at 1 kPa
csound,fluid
1131.10
m/s
298.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
csound,fluid
1140.00
m/s
298.15
Excess properties of the binary mixtures of methylcyclohexane + alkanes (C6 to C12) at T = 298.15 K to T = 308.15 K i
at 1 kPa
csound,fluid
1131.00
m/s
298.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
csound,fluid
1130.90
m/s
298.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
csound,fluid
1129.60
m/s
298.15
Thermodynamics of Mixtures Containing Amines. XII. Volumetric and Speed of Sound Data at (293.15, 298.15, and 303.15) K for N-Methylaniline + Hydrocarbon Systems
csound,fluid
1130.10
m/s
298.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
csound,fluid
1131.00
m/s
298.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
csound,fluid
1131.00
m/s
298.15
Mixing properties of binary mixtures presenting azeotropes at several temperatures
csound,fluid
1088.00
m/s
298.15
Excess molar volumes and isentropic compressibilities changes of mixing of tetrahydropyran + benzene + cyclo or n-alkanes ternary mixtures at 308.15 K i
at 1 kPa
csound,fluid
1131.42
m/s
298.15
Thermodynamic properties of solvation of aromatic compounds in cyclohexane, heptane, benzene, 1,4-dioxane, and chloroform at 298.15 K i
at 1 kPa
csound,fluid
1127.72
m/s
298.84
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
csound,fluid
1108.00
m/s
302.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
1109.45
m/s
302.98
Thermodynamic and Acoustic Properties of Mixtures of 1,6-Dichlorohexane with Heptane from (293 to 313) K
csound,fluid
1108.78
m/s
303.10
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
csound,fluid
1110.00
m/s
303.15
Mixing properties of binary mixtures presenting azeotropes at several temperatures
csound,fluid
1110.50
m/s
303.15
Excess volumes, densities, speeds of sound and viscosities for the binary systems of diisopropyl ether with hydrocarbons at 303.15K i
at 1 kPa
csound,fluid
1116.00
m/s
303.15
Density, Viscosity, and Speed of Sound of (Methyl Benzoate + Cyclohexane), (Methyl Benzoate + n-Hexane), (Methyl Benzoate + Heptane), and (Methyl Benzoate + Octane) at Temperatures of (303.15, 308.15, and 313.15) K
csound,fluid
1109.10
m/s
303.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
csound,fluid
1109.60
m/s
303.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
csound,fluid
1109.70
m/s
303.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
csound,fluid
1109.00
m/s
303.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
csound,fluid
1111.20
m/s
303.15
Thermodynamics of Mixtures Containing Amines. XII. Volumetric and Speed of Sound Data at (293.15, 298.15, and 303.15) K for N-Methylaniline + Hydrocarbon Systems
csound,fluid
1109.10
m/s
303.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
csound,fluid
1106.38
m/s
303.80
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
csound,fluid
1087.42
m/s
308.06
Thermodynamic and Acoustic Properties of Mixtures of 1,6-Dichlorohexane with Heptane from (293 to 313) K
csound,fluid
1087.47
m/s
308.07
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
csound,fluid
1088.10
m/s
308.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
csound,fluid
1088.00
m/s
308.15
Topological and thermodynamic investigations of binary mixtures: Molar excess volumes, molar excess enthalpies and isentropic compressibility changes of mixing i
at 1 kPa
csound,fluid
1087.50
m/s
308.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
csound,fluid
1088.20
m/s
308.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
csound,fluid
1092.00
m/s
308.15
Density, Viscosity, and Speed of Sound of (Methyl Benzoate + Cyclohexane), (Methyl Benzoate + n-Hexane), (Methyl Benzoate + Heptane), and (Methyl Benzoate + Octane) at Temperatures of (303.15, 308.15, and 313.15) K
csound,fluid
1088.00
m/s
308.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
csound,fluid
1088.40
m/s
308.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
csound,fluid
1085.10
m/s
308.78
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
csound,fluid
1066.28
m/s
313.03
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
csound,fluid
1067.20
m/s
313.15
Thermophysical Study of the n-Hexane or n-Heptane with 1- Chloropropane Systems
csound,fluid
1066.90
m/s
313.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
csound,fluid
1067.10
m/s
313.15
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
csound,fluid
1072.00
m/s
313.15
Density, Viscosity, and Speed of Sound of (Methyl Benzoate + Cyclohexane), (Methyl Benzoate + n-Hexane), (Methyl Benzoate + Heptane), and (Methyl Benzoate + Octane) at Temperatures of (303.15, 308.15, and 313.15) K
csound,fluid
1066.00
m/s
313.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
csound,fluid
1066.60
m/s
313.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
csound,fluid
1064.29
m/s
313.45
Thermodynamic and Acoustic Properties of Mixtures of 1,6-Dichlorohexane with Heptane from (293 to 313) K
csound,fluid
1059.14
m/s
314.87
Heat Capacity, Speed of Ultrasound, and Density for 1,5-Dibromopentane + Heptane within the Temperature Range from 293.15 K to 313.15 K
csound,fluid
1045.40
m/s
318.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
csound,fluid
1045.00
m/s
318.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
csound,fluid
1042.00
m/s
318.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
1043.90
m/s
318.33
Excess molar heat capacities for (decan-1-ol + n-heptane) at temperatures from (290 to 318) K. Experimental results and theoretical description using the ERAS model
csound,fluid
1024.70
m/s
323.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
csound,fluid
1024.00
m/s
323.15
Volumetric and acoustic properties of binary mixtures of tri-n-butyl phosphate with n-hexane, cyclohexane, and n-heptane from T = (298.15 to 323.15) K
csound,fluid
1003.60
m/s
328.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
csound,fluid
983.00
m/s
333.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
csound,fluid
981.50
m/s
333.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
962.30
m/s
338.15
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
csound,fluid
921.10
m/s
348.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
861.20
m/s
363.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
801.60
m/s
378.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
742.30
m/s
393.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
683.10
m/s
408.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
170.30
m/s
408.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
643.50
m/s
418.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
168.10
m/s
418.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
603.90
m/s
428.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
165.90
m/s
428.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
564.00
m/s
438.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
163.40
m/s
438.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
160.50
m/s
448.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
523.90
m/s
448.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
503.60
m/s
453.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
158.80
m/s
453.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
483.30
m/s
458.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
157.00
m/s
458.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
462.80
m/s
463.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
155.00
m/s
463.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
152.80
m/s
468.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
442.20
m/s
468.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
150.30
m/s
473.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
421.30
m/s
473.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
400.30
m/s
478.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
147.50
m/s
478.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
144.50
m/s
483.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
379.00
m/s
483.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
141.20
m/s
488.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
357.40
m/s
488.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
335.40
m/s
493.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
137.50
m/s
493.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
133.40
m/s
498.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
313.00
m/s
498.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
129.00
m/s
503.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
290.10
m/s
503.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
124.10
m/s
508.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
266.60
m/s
508.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
242.40
m/s
513.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
118.70
m/s
513.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
217.30
m/s
518.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
112.80
m/s
518.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
106.40
m/s
523.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
190.90
m/s
523.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
99.37
m/s
528.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
162.70
m/s
528.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
91.71
m/s
533.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
131.90
m/s
533.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
111.10
m/s
536.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
csound,fluid
86.78
m/s
536.15
Measurement of the Speed of Sound in Hexane and Heptane at Temperatures from (303.15 to 536.15) K and Pressures from (1.0 to 8.5) MPa
γ
[0.01; 0.02]
N/m
[277.93; 358.12]
γ
0.02
N/m
277.93
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
282.83
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
283.15
Experimental and theoretical study of surface tension of n-pentane, n-heptane, and some of their mixtures at different temperatures
γ
0.02
N/m
287.81
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
288.15
Interfacial Tensions of Imidazolium-Based Ionic Liquids with N-Alkanes and Cyclohexane
γ
0.02
N/m
288.15
Density and Surface Tension Variation with Temperature for Heptane + 1-Alkanol
γ
0.02
N/m
292.81
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
293.15
Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane +1-Alkanols from 298.15 to 323.15 K
γ
0.02
N/m
293.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
γ
0.02
N/m
293.15
Surface Properties of Dilute Solutions of Alkanes in Benzyl Alcohol
γ
0.02
N/m
293.15
Surface Tension of Dilute Solutions of Alkanes in Cyclohexanol at Different Temperatures
γ
0.02
N/m
293.15
Surface tension and density of mixtures of m-xylene + n-alkane at 293.15 K: Analysis under the extended Langmuir and Shereshefsky models
γ
0.02
N/m
293.15
Density and Surface Tension Variation with Temperature for Heptane + 1-Alkanol
γ
0.02
N/m
293.15
Experimental and theoretical study of surface tension of n-pentane, n-heptane, and some of their mixtures at different temperatures
γ
0.02
N/m
293.20
KDB
γ
0.02
N/m
294.40
Density, Viscosity, Speed of Sound, Bulk Modulus, and Surface Tension of Binary Mixtures of n-Heptane + 2,2,4-Trimethylpentane at (293.15 to 338.15) K and 0.1 MPa
γ
0.02
N/m
297.82
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
298.13
Surface Tension of Diethyl Ether, Diisopropyl Ether, and Dibutyl Ether
γ
0.02
N/m
298.15
Surface Properties of Dilute Solutions of Alkanes in Benzyl Alcohol
γ
0.02
N/m
298.15
Density and Surface Tension Variation with Temperature for Heptane + 1-Alkanol
γ
0.02
N/m
298.15
NCMS SOLV-DB
γ
0.02
N/m
298.15
Interfacial Tensions of Imidazolium-Based Ionic Liquids with N-Alkanes and Cyclohexane
γ
0.02
N/m
298.15
Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane +1-Alkanols from 298.15 to 323.15 K
γ
0.02
N/m
298.15
Surface Tension of Dilute Solutions of Alkanes in Cyclohexanol at Different Temperatures
γ
0.02
N/m
298.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
γ
0.02
N/m
298.15
Experimental and theoretical study of surface tension of binary mixtures of (n-alkyl acetates + heptane, benzene, and toluene)
γ
0.02
N/m
302.83
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
303.15
Surface Properties of Dilute Solutions of Alkanes in Benzyl Alcohol
γ
0.02
N/m
303.15
Experimental and theoretical study of surface tension of n-pentane, n-heptane, and some of their mixtures at different temperatures
γ
0.02
N/m
303.15
Surface Tension of Dilute Solutions of Alkanes in Cyclohexanol at Different Temperatures
γ
0.02
N/m
303.15
Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane +1-Alkanols from 298.15 to 323.15 K
γ
0.02
N/m
303.15
Density and Surface Tension Variation with Temperature for Heptane + 1-Alkanol
γ
0.02
N/m
303.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
γ
0.02
N/m
303.18
Surface Tension of Diethyl Ether, Diisopropyl Ether, and Dibutyl Ether
γ
0.02
N/m
303.49
Surface Tension of 2,2-Dimethylbutane from (233 to 378) K
γ
0.02
N/m
307.86
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
308.12
Surface Tension of Diethyl Ether, Diisopropyl Ether, and Dibutyl Ether
γ
0.02
N/m
308.15
Interfacial Tensions of Imidazolium-Based Ionic Liquids with N-Alkanes and Cyclohexane
γ
0.02
N/m
308.15
Surface Properties of Dilute Solutions of Alkanes in Benzyl Alcohol
γ
0.02
N/m
308.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
γ
0.02
N/m
308.15
Surface Tension of Dilute Solutions of Alkanes in Cyclohexanol at Different Temperatures
γ
0.02
N/m
308.15
Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane +1-Alkanols from 298.15 to 323.15 K
γ
0.02
N/m
308.15
Density and Surface Tension Variation with Temperature for Heptane + 1-Alkanol
γ
0.02
N/m
312.86
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
313.13
Surface Tension of 2,2-Dimethylbutane from (233 to 378) K
γ
0.02
N/m
313.15
Surface Tension of Dilute Solutions of Alkanes in Cyclohexanol at Different Temperatures
γ
0.02
N/m
313.15
Density and Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane + n-Heptane, 2,2,4-Trimethylpentane + n-Octane, Ethyl Acetate + Benzene, and Butanenitrile + Benzene from (293.15 to 323.15) K
γ
0.02
N/m
313.15
Surface Properties of Dilute Solutions of Alkanes in Benzyl Alcohol
γ
0.02
N/m
313.15
Experimental and theoretical study of surface tension of n-pentane, n-heptane, and some of their mixtures at different temperatures
γ
0.02
N/m
313.15
Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane +1-Alkanols from 298.15 to 323.15 K
γ
0.02
N/m
313.18
Surface Tension of Diethyl Ether, Diisopropyl Ether, and Dibutyl Ether
γ
0.02
N/m
317.86
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
318.15
Surface Tension of Dilute Solutions of Alkanes in Cyclohexanol at Different Temperatures
γ
0.02
N/m
318.15
Surface Tension of Binary Mixtures of 2,2,4-Trimethylpentane +1-Alkanols from 298.15 to 323.15 K
γ
0.02
N/m
318.15
Surface Properties of Dilute Solutions of Alkanes in Benzyl Alcohol
γ
0.02
N/m
318.15
Interfacial Tensions of Imidazolium-Based Ionic Liquids with N-Alkanes and Cyclohexane
γ
0.02
N/m
318.17
Surface Tension of Diethyl Ether, Diisopropyl Ether, and Dibutyl Ether
γ
0.02
N/m
318.49
Surface Tension of 2,2-Dimethylbutane from (233 to 378) K
γ
0.02
N/m
322.86
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
323.15
Surface Tension of Dilute Solutions of Alkanes in Cyclohexanol at Different Temperatures
γ
0.02
N/m
323.15
Experimental and theoretical study of surface tension of n-pentane, n-heptane, and some of their mixtures at different temperatures
γ
0.02
N/m
323.15
Surface Properties of Dilute Solutions of Alkanes in Benzyl Alcohol
γ
0.02
N/m
323.15
Surface Tension of 2,2-Dimethylbutane from (233 to 378) K
γ
0.02
N/m
323.20
Surface Tension of Diethyl Ether, Diisopropyl Ether, and Dibutyl Ether
γ
0.02
N/m
327.88
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
328.12
Surface Tension of 2,2-Dimethylbutane from (233 to 378) K
γ
0.02
N/m
328.15
Surface Tension of Diethyl Ether, Diisopropyl Ether, and Dibutyl Ether
γ
0.02
N/m
328.15
Interfacial Tensions of Imidazolium-Based Ionic Liquids with N-Alkanes and Cyclohexane
γ
0.02
N/m
332.91
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
333.13
Surface Tension of 2,2-Dimethylbutane from (233 to 378) K
γ
0.02
N/m
337.88
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
338.14
Surface Tension of 2,2-Dimethylbutane from (233 to 378) K
γ
0.02
N/m
342.92
Surface Tension of Pure Liquids and Binary Liquid Mixtures
γ
0.02
N/m
343.12
Surface Tension of 2,2-Dimethylbutane from (233 to 378) K
γ
0.01
N/m
348.13
Surface Tension of 2,2-Dimethylbutane from (233 to 378) K
γ
0.01
N/m
358.12
Surface Tension of 2,2-Dimethylbutane from (233 to 378) K