- InChI
- InChI=1S/C24H22O4/c1-17-12-13-20(16-18(17)2)27-23(25)14-15-24(26)28-22-11-7-6-10-21(22)19-8-4-3-5-9-19/h3-13,16H,14-15H2,1-2H3
- InChI Key
- HZOOXWISRIJDPY-UHFFFAOYSA-N
- Formula
- C24H22O4
- SMILES
-
Cc1ccc(OC(=O)CCC(=O)Oc2ccccc2-
c2ccccc2)cc1C - Molecular Weight1
- 374.44
- Cp,gas : Ideal gas heat capacity (J/mol×K).
- η : Dynamic viscosity (Pa×s).
- ΔfusH° : Enthalpy of fusion at standard conditions (kJ/mol).
- logPoct/wat : Octanol/Water partition coefficient.
- McVol : McGowan's characteristic volume (ml/mol).
- Inp : Non-polar retention indices.
- Tboil : Normal Boiling Point Temperature (K).
- Tfus : Normal melting (fusion) point (K).
- 1: Molecular weight from the IUPAC atomic weights tables.
Physical Properties
| Property | Value | Unit | Source |
|---|---|---|---|
| ΔfusH° | 47.61 | kJ/mol | Joback Calculated Property |
| logPoct/wat | 5.262 | Crippen Calculated Property | |
| McVol | 292.620 | ml/mol | McGowan Calculated Property |
| Inp | [3097.00; 3097.00] |
|
|
| Inp | 3097.00 | NIST | |
| Inp | 3097.00 | NIST | |
| Tboil | 711.69 | K | Relay (1.0) Calculated Property |
| Tfus | 368.50 | K | Relay (1.0) Calculated Property |
Cheméo can also estimate Critical Temperature, Critical Pressure, Critical Volume, Enthalpy of formation at standard conditions, Enthalpy of vaporization at standard conditions, Standard Gibbs free energy of formation, Acentric Factor, Ionization energy, Log10 of Water solubility in mol/l for this compound, but they fall outside the models' validated range, so they are not shown here. Open the prediction tool to compute them on demand.
Correlations
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| Cp,gas | [383.17; 909.03] | J/mol×K | [273.00; 1000.00] |
Joback Predicted correlation
|
| Equation | Y = A + B·T + C·T² + D·T³ + E·T⁴ Y is Cp,gas in J/mol×K, T in K | |||
| Coefficient A | -2.69280e+01 | |||
| Coefficient B | 1.75904e+00 | |||
| Coefficient C | -9.85080e-04 | |||
| Coefficient D | 1.62000e-07 | |||
| Coefficient E | 0.00000e+00 | |||
| Temperature range, min. | 273.00 | |||
| Temperature range, max. | 1000.00 | |||
| Cp,gas | 383.17 | J/mol×K | 273.00 | Calculated Property |
| Cp,gas | 479.26 | J/mol×K | 353.78 | Calculated Property |
| Cp,gas | 564.75 | J/mol×K | 434.56 | Calculated Property |
| Cp,gas | 640.13 | J/mol×K | 515.33 | Calculated Property |
| Cp,gas | 705.92 | J/mol×K | 596.11 | Calculated Property |
| Cp,gas | 762.65 | J/mol×K | 676.89 | Calculated Property |
| Cp,gas | 810.81 | J/mol×K | 757.67 | Calculated Property |
| Cp,gas | 850.91 | J/mol×K | 838.44 | Calculated Property |
| Cp,gas | 883.49 | J/mol×K | 919.22 | Calculated Property |
| Cp,gas | 909.03 | J/mol×K | 1000.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| η | [0.0002950; 0.0000418] | Pa×s | [561.72; 841.93] |
Joback Predicted correlation
|
| Equation | Y = exp(A + B/T + C·ln(T) + D·T^E) Y is η in Pa×s, T in K | |||
| Coefficient A | -1.39966e+01 | |||
| Coefficient B | 3.29620e+03 | |||
| Coefficient C | 0.00000e+00 | |||
| Coefficient D | 0.00000e+00 | |||
| Coefficient E | 0.00000e+00 | |||
| Comment | Liquid phase. Joback/Reid (1987), valid from Tf to 0.7·Tc. | |||
| Temperature range, min. | 561.72 | |||
| Temperature range, max. | 841.93 | |||
| η | 0.0002950 | Pa×s | 561.72 | Calculated Property |
| η | 0.0002168 | Pa×s | 592.85 | Calculated Property |
| η | 0.0001643 | Pa×s | 623.99 | Calculated Property |
| η | 0.0001278 | Pa×s | 655.12 | Calculated Property |
| η | 0.0001017 | Pa×s | 686.26 | Calculated Property |
| η | 0.0000826 | Pa×s | 717.39 | Calculated Property |
| η | 0.0000682 | Pa×s | 748.53 | Calculated Property |
| η | 0.0000572 | Pa×s | 779.66 | Calculated Property |
| η | 0.0000486 | Pa×s | 810.80 | Calculated Property |
| η | 0.0000418 | Pa×s | 841.93 | Calculated Property |
Similar Compounds
Find more compounds similar to Succinic acid, 3,4-dimethylphenyl 2-biphenyl ester.
Sources
- Cheméo Relay (1.0)
- Cheméo Relay (1.0, beta) Beta: served but experimental, data-limited and below our cross-validation release bar; the Joback value is recommended where available.
- Crippen Method
- Crippen Method
- Joback Method
- McGowan Method
- NIST Webbook
Note: Cheméo is only indexing the data, follow the source links to retrieve the latest data. The source is also providing more information like the publication year, authors and more.
Take the time to validate and double check the source of the data.
These property values are available through the Cheméo API. A free account gives you an access key.