Chemical Properties of «alpha»-Ethyldecalin (CAS 1008-17-9)

InChI

InChI=1S/C12H22/c1-2-10-7-5-8-11-6-3-4-9-12(10)11/h10-12H,2-9H2,1H3

InChI Key

HUMCBDCARGDFNV-UHFFFAOYSA-N

Formula

C12H22

SMILES

CCC1CCCC2CCCCC12

Molecular Weight¹

166.30

CAS

1008-17-9

Other Names

• 1-Ethyldecahydronaphthalene

• Δ_cH°_liquid : Standard liquid enthalpy of combustion (kJ/mol).
• C_p,gas : Ideal gas heat capacity (J/mol×K).
• C_p,liquid : Liquid phase heat capacity (J/mol×K).
• η : Dynamic viscosity (Pa×s).
• Δ_fusH° : Enthalpy of fusion at standard conditions (kJ/mol).
• Δ_vapH° : Enthalpy of vaporization at standard conditions (kJ/mol).
• IE : Ionization energy (eV).
• logP_oct/wat : Octanol/Water partition coefficient.
• McVol : McGowan's characteristic volume (ml/mol).
• T_boil : Normal Boiling Point Temperature (K).
• T_fus : Normal melting (fusion) point (K).
• ¹: Molecular weight from the IUPAC atomic weights tables.

Physical Properties

Cheméo can also estimate Critical Temperature, Critical Pressure, Critical Volume, Enthalpy of formation at standard conditions, Standard Gibbs free energy of formation, Acentric Factor, Log10 of Water solubility in mol/l for this compound, but they fall outside the models' validated range, so they are not shown here. Open the prediction tool to compute them on demand.

Temperature Dependent Properties

Property	Value	Unit	Temperature (K)	Source
Cp,liquid	[302.70; 376.10]	J/mol×K	[310.00; 420.00]
Cp,liquid	302.70	J/mol×K	310.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	303.30	J/mol×K	311.00	NIST
Cp,liquid	305.40	J/mol×K	313.00	NIST
Cp,liquid	309.40	J/mol×K	320.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	316.10	J/mol×K	330.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	322.70	J/mol×K	340.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	329.40	J/mol×K	350.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	336.10	J/mol×K	360.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	342.80	J/mol×K	370.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	349.40	J/mol×K	380.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	356.10	J/mol×K	390.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	362.80	J/mol×K	400.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	369.50	J/mol×K	410.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Cp,liquid	376.10	J/mol×K	420.00	Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD

Correlations

Property	Value	Unit	Temperature (K)	Source
Cp,gas	[195.86; 611.67]	J/mol×K	[273.00; 1000.00]	Joback Predicted correlation
Equation			Y = A + B·T + C·T² + D·T³ + E·T⁴ Y is Cp,gas in J/mol×K, T in K
Coefficient A			-1.23049e+02
Coefficient B			1.38072e+00
Coefficient C			-8.28400e-04
Coefficient D			1.82400e-07
Coefficient E			0.00000e+00
Temperature range, min.			273.00
Temperature range, max.			1000.00
Cp,gas	195.86	J/mol×K	273.00	Calculated Property
Cp,gas	269.81	J/mol×K	353.78	Calculated Property
Cp,gas	335.48	J/mol×K	434.56	Calculated Property
Cp,gas	393.45	J/mol×K	515.33	Calculated Property
Cp,gas	444.28	J/mol×K	596.11	Calculated Property
Cp,gas	488.56	J/mol×K	676.89	Calculated Property
Cp,gas	526.86	J/mol×K	757.67	Calculated Property
Cp,gas	559.76	J/mol×K	838.44	Calculated Property
Cp,gas	587.84	J/mol×K	919.22	Calculated Property
Cp,gas	611.67	J/mol×K	1000.00	Calculated Property

Property	Value	Unit	Temperature (K)	Source
η	[0.0034936; 0.0004046]	Pa×s	[242.56; 500.60]	Joback Predicted correlation
Equation			Y = exp(A + B/T + C·ln(T) + D·T^E) Y is η in Pa×s, T in K
Coefficient A			-9.83916e+00
Coefficient B			1.01447e+03
Coefficient C			0.00000e+00
Coefficient D			0.00000e+00
Coefficient E			0.00000e+00
Comment			Liquid phase. Joback/Reid (1987), valid from Tf to 0.7·Tc.
Temperature range, min.			242.56
Temperature range, max.			500.60
η	0.0034936	Pa×s	242.56	Calculated Property
η	0.0022453	Pa×s	271.23	Calculated Property
η	0.0015703	Pa×s	299.90	Calculated Property
η	0.0011689	Pa×s	328.57	Calculated Property
η	0.0009124	Pa×s	357.25	Calculated Property
η	0.0007388	Pa×s	385.92	Calculated Property
η	0.0006160	Pa×s	414.59	Calculated Property
η	0.0005258	Pa×s	443.26	Calculated Property
η	0.0004576	Pa×s	471.93	Calculated Property
η	0.0004046	Pa×s	500.60	Calculated Property

Similar Compounds

Find more compounds similar to «alpha»-Ethyldecalin.

Sources

• Cheméo Relay (1.0)
• Cheméo Relay (1.0, beta) Beta: served but experimental, data-limited and below our cross-validation release bar; the Joback value is recommended where available.
• Crippen Method
• Crippen Method
• Joback Method
• McGowan Method
• NIST Webbook
• Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD

Note: Cheméo is only indexing the data, follow the source links to retrieve the latest data. The source is also providing more information like the publication year, authors and more. Take the time to validate and double check the source of the data.
Calculated This icon marks a calculated value or equation: a prediction, not a measurement.
These property values are available through the Cheméo API. A free account gives you an access key.