| Property | Value | Unit | Source |
|---|---|---|---|
| ω | [0.2460; 0.2490] |
|
|
| ω | 0.2460 | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value | |
| ω | 0.2466 | ChemSep v8.3 pure component data Compiled value | |
| ω | 0.2490 | KDB | |
| ΔcH°liquid | [-3192.80; -3192.80] | kJ/mol |
|
| ΔcH°liquid | -3192.80 ± 4.20 | kJ/mol | NIST Smith, 1956 |
| Reanalyzed by Cox and Pilcher, 1970, Original value = -3190.0 kJ/mol; Heat of formation derived by Cox and Pilcher, 1970 | |||
| ΔcH°liquid | -3192.80 ± 4.20 | kJ/mol | NIST Smith, 1956 |
| Reanalyzed by Cox and Pilcher, 1970, Original value = -3190.0 kJ/mol | |||
| μ | [1.40; 1.70] | debye |
|
| μ | 1.70 | debye | ChemSep v8.3 pure component data Compiled value |
| μ | 1.40 | debye | KDB |
| ΔfG° | [187.90; 190.20] | kJ/mol |
|
| ΔfG° | 190.20 | kJ/mol | ChemSep v8.3 pure component data Compiled value |
| ΔfG° | 187.90 | kJ/mol | KDB |
| ΔfH°gas | [161.90; 165.00] | kJ/mol |
|
| ΔfH°gas | 161.90 ± 1.10 | kJ/mol | Active Thermochemical Tables 1.112, gas-phase enthalpies of formation Compiled value |
| ΔfH°gas | 164.90 | kJ/mol | ChemSep v8.3 pure component data Compiled value |
| ΔfH°gas | 162.70 | kJ/mol | KDB |
| ΔfH°gas | 165.00 ± 5.90 | kJ/mol | NIST Smith, 1956 |
| Heat of formation derived by Cox and Pilcher, 1970 | |||
| ΔfH°liquid | 117.00 ± 4.20 | kJ/mol | NIST Smith, 1956 |
| Heat of formation derived by Cox and Pilcher, 1970 | |||
| ΔfusH° | 9.74 | kJ/mol | Joback Calculated Property |
| ΔvapH° | [47.40; 48.90] | kJ/mol |
|
| ΔvapH° | 47.40 | kJ/mol | NISTChickos, Hosseini, et al., 1995 |
| ΔvapH° | 48.90 | kJ/mol | NIST Boublik, Fried, et al., 1984 |
| See also Basarová and Svoboda, 1991. | |||
| ΔvapH° | 47.70 ± 4.20 | kJ/mol | NIST Smith, 1956 |
| Heat of formation derived by Cox and Pilcher, 1970 | |||
| IE | [8.67; 9.05] | eV |
|
| IE | 8.72 ± 0.04 | eV | NISTN/A |
| IE | 8.79 | eV | NIST Fujisawa, Ohno, et al., 1986 |
| LBLHLM | |||
| IE | 8.75 | eV | NIST Klasinc, Kovac, et al., 1983 |
| LBLHLM | |||
| IE | 8.69 | eV | NIST Dannacher, Rosenstock, et al., 1983 |
| LBLHLM | |||
| IE | 8.79 | eV | NISTKimura, Katsumata, et al., 1981 |
| IE | 8.70 | eV | NISTBehan, Johnstone, et al., 1976 |
| IE | Outlier 9.05 | eV | NISTBaldwin, Loudon, et al., 1976 |
| IE | 8.77 ± 0.02 | eV | NISTBaer, Tsai, et al., 1976 |
| IE | 8.67 | eV | NISTBoschi and Salahub, 1974 |
| IE | 8.73 ± 0.01 | eV | NISTSergeev, Akopyan, et al., 1970 |
| IE | 8.69 | eV | NISTMomigny, Goffart, et al., 1968 |
| IE | 8.73 ± 0.03 | eV | NISTWatanabe, 1957 |
| IE | 8.80 | eV | NIST Potts, Lyus, et al., 1980 |
| Vertical value | |||
| IE | 8.67 | eV | NIST Sell and Kupperman, 1978 |
| Vertical value | |||
| log10WS | [-3.01; -2.89] |
|
|
| log10WS | -2.89 | Aq. Solubility Prediction | |
| log10WS | -3.01 | Estimated Solubility | |
| logPoct/wat | 2.291 | Crippen Calculated Property | |
| McVol | 97.460 | ml/mol | McGowan Calculated Property |
| Pc | [4519.10; 4520.00] | kPa |
|
| Pc | 4519.10 | kPa | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value |
| Pc | 4519.10 | kPa | ChemSep v8.3 pure component data Compiled value |
| Pc | 4520.00 | kPa | KDB |
| Ptriple | 1.18e-03 | kPa | ChemSep v8.3 pure component data Compiled value |
| Inp | [1033.00; 1088.00] |
|
|
| Inp | 1079.60 | NIST Dallos, Sisak, et al., 2000 | |
| He; Column length: 3.3 m | |||
| Inp | 1088.00 | NIST Evans and Haken, 1987 | |
| He, Chromosorb G AW DCMS; Column length: 3.7 m | |||
| Inp | 1088.00 | NIST Haken and Vernon, 1986 | |
| Chromosorb G AW DCMS; Column length: 3.7 m | |||
| Inp | 1075.00 | NIST Oszczapowicz, Osek, et al., 1984 | |
| N2, Chromosorb W AW; Column length: 3. m | |||
| Inp | 1050.00 | NIST Tiess, 1984 | |
| Ar, Gas Chrom Q (80-100 mesh); Column length: 3. m | |||
| Inp | 1033.00 | NIST Buchman, Cao, et al., 1984 | |
| He, Chromosorb AW, 40. C @ 10. min, 10. K/min, 210. C @ 30. min; Column length: 3.05 m | |||
| Inp | 1033.00 | NIST Buchman, Cao, et al., 1984 | |
| He, Chromosorb AW; Column length: 3.05 m; Program: not specified | |||
| Inp | 1033.00 | NIST Waggott and Davies, 1984 | |
| Hydrogen; Column length: 50. m; Column diameter: 0.32 mm; Program: not specified | |||
| Inp | 1079.60 | NISTMSDC-RI | |
| Inp | 1033.00 | NISTMSDC-RI | |
| Ip | [1569.00; 1569.00] |
|
|
| Ip | 1569.00 | NIST Buchman, Cao, et al., 1984 | |
| He, Supelcoport, 40. C @ 10. min, 10. K/min, 210. C @ 30. min; Column length: 3.05 m | |||
| Ip | 1569.00 | NIST Waggott and Davies, 1984 | |
| Hydrogen; Column length: 50. m; Column diameter: 0.32 mm; Program: not specified | |||
| S°liquid | 205.40 | J/mol×K | NIST Stull, 1937 |
| Extrapolation below 91 K, 53.14 J/mol*K. | |||
| Tboil | [460.85; 461.70] | K |
|
| Tboil | 461.60 | K | ChemSep v8.3 pure component data Compiled value |
| Tboil | 461.60 | K | KDB |
| Tboil | 461.50 | K | NISTWeast and Grasselli, 1989 |
| Tboil | 461.60 ± 0.30 | K | NISTLecat, 1943 |
| Tboil | 461.70 ± 0.50 | K | NISTLecat, 1927 |
| Tboil | 461.70 ± 0.50 | K | NISTLecat, 1927, 2 |
| Tboil | 461.15 ± 0.30 | K | NISTDrucker, Jimeno, et al., 1915 |
| Tboil | Outlier 460.85 ± 0.50 | K | NISTPerkin, 1896 |
| Tc | [721.00; 721.15] | K |
|
| Tc | 721.00 | K | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value |
| Tc | 721.15 | K | ChemSep v8.3 pure component data Compiled value |
| Tc | 721.00 | K | KDB |
| Tfus | [241.80; 242.15] | K |
|
| Tfus | 242.15 | K | Jean-Claude Bradley Open Melting Point Dataset (2014, CC0) Compiled value |
| Tfus | 241.83 | K | ChemSep v8.3 pure component data Compiled value |
| Tfus | 241.80 | K | KDB |
| Tfus | 242.05 | K | Aq. Solubility Prediction |
| Tfus | 242.15 ± 1.00 | K | NISTMallikarjun and Hill, 1965 |
| Tfus | 241.90 ± 0.02 | K | NISTDreisbach, 1955 |
| Tfus | 241.80 ± 0.30 | K | NISTTimmermans, 1952 |
| Ttriple | [241.80; 241.83] | K |
|
| Ttriple | 241.83 | K | ChemSep v8.3 pure component data Compiled value |
| Ttriple | 241.80 ± 0.25 | K | NISTStull, 1937, 2 |
| Ttriple | 241.80 ± 0.25 | K | NISTStull, 1937 |
| UQi | 3.11 | ChemSep v8.3 pure component data Compiled value | |
| URi | 4.29 | ChemSep v8.3 pure component data Compiled value | |
| Vc | [0.351; 0.351] | m3/kmol |
|
| Vc | 0.351 | m3/kmol | PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value |
| Vc | 0.351 | m3/kmol | ChemSep v8.3 pure component data Compiled value |
| Vc | 0.351 | m3/kmol | KDB |
| Zc | [0.2646510; 0.2650000] |
|
|
| Zc | 0.2650000 | ChemSep v8.3 pure component data Compiled value | |
| Zc | 0.2646510 | KDB | |
| Zra | 0.26 | KDB | |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| Cp,gas | [76.13; 247.03] | J/mol×K | [200.00; 1500.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is Cp,gas in J/mol×K, T in K | |||
| Coefficient A | 6.34420e+01 | |||
| Coefficient B | -6.92720e+02 | |||
| Coefficient C | 6.09524e+00 | |||
| Coefficient D | -4.82970e-04 | |||
| Coefficient E | 1.34990e-07 | |||
| Temperature range, min. | 200.00 | |||
| Temperature range, max. | 1500.00 | |||
| Cp,gas | 76.13 | J/mol×K | 200.00 | Calculated Property |
| Cp,gas | 114.54 | J/mol×K | 344.44 | Calculated Property |
| Cp,gas | 151.19 | J/mol×K | 488.89 | Calculated Property |
| Cp,gas | 179.00 | J/mol×K | 633.33 | Calculated Property |
| Cp,gas | 199.17 | J/mol×K | 777.78 | Calculated Property |
| Cp,gas | 213.87 | J/mol×K | 922.22 | Calculated Property |
| Cp,gas | 224.90 | J/mol×K | 1066.67 | Calculated Property |
| Cp,gas | 233.54 | J/mol×K | 1211.11 | Calculated Property |
| Cp,gas | 240.69 | J/mol×K | 1355.56 | Calculated Property |
| Cp,gas | 247.03 | J/mol×K | 1500.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| Cp,liquid | [155.15; 162.91] | J/mol×K | [250.00; 350.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is Cp,liquid in J/mol×K, T in K | |||
| Coefficient A | 1.39830e+02 | |||
| Coefficient B | 5.78690e+02 | |||
| Coefficient C | -5.26246e+00 | |||
| Coefficient D | 3.12780e-02 | |||
| Coefficient E | -3.42790e-05 | |||
| Temperature range, min. | 250.00 | |||
| Temperature range, max. | 350.00 | |||
| Cp,liquid | 155.15 | J/mol×K | 250.00 | Calculated Property |
| Cp,liquid | 156.01 | J/mol×K | 261.11 | Calculated Property |
| Cp,liquid | 156.91 | J/mol×K | 272.22 | Calculated Property |
| Cp,liquid | 157.83 | J/mol×K | 283.33 | Calculated Property |
| Cp,liquid | 158.76 | J/mol×K | 294.44 | Calculated Property |
| Cp,liquid | 159.68 | J/mol×K | 305.56 | Calculated Property |
| Cp,liquid | 160.57 | J/mol×K | 316.67 | Calculated Property |
| Cp,liquid | 161.42 | J/mol×K | 327.78 | Calculated Property |
| Cp,liquid | 162.21 | J/mol×K | 338.89 | Calculated Property |
| Cp,liquid | 162.91 | J/mol×K | 350.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| η | [0.0051078; 0.0003470] | Pa×s | [241.83; 461.60] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = exp(A + B/T + C·ln(T) + D·T^E) Y is η in Pa×s, T in K | |||
| Coefficient A | -5.71770e+01 | |||
| Coefficient B | 3.15780e+03 | |||
| Coefficient C | 7.15290e+00 | |||
| Coefficient D | -7.09130e-06 | |||
| Coefficient E | 2.00000e+00 | |||
| Temperature range, min. | 241.83 | |||
| Temperature range, max. | 461.60 | |||
| η | 0.0051078 | Pa×s | 241.83 | Calculated Property |
| η | 0.0028103 | Pa×s | 266.25 | Calculated Property |
| η | 0.0017649 | Pa×s | 290.67 | Calculated Property |
| η | 0.0012193 | Pa×s | 315.09 | Calculated Property |
| η | 0.0009030 | Pa×s | 339.51 | Calculated Property |
| η | 0.0007039 | Pa×s | 363.92 | Calculated Property |
| η | 0.0005698 | Pa×s | 388.34 | Calculated Property |
| η | 0.0004743 | Pa×s | 412.76 | Calculated Property |
| η | 0.0004028 | Pa×s | 437.18 | Calculated Property |
| η | 0.0003470 | Pa×s | 461.60 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| ΔvapH | [51.63; 0.00] | kJ/mol | [241.83; 721.15] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc Y is ΔvapH in kJ/mol, T in K | |||
| Coefficient A | 6.14882e+01 | |||
| Coefficient B | 4.33906e-01 | |||
| Coefficient C | -1.02943e-02 | |||
| Coefficient D | -1.30647e-02 | |||
| Coefficient E | -3.29532e-02 | |||
| Critical temperature, Tc (K) | 7.21150e+02 | |||
| Temperature range, min. | 241.83 | |||
| Temperature range, max. | 721.15 | |||
| ΔvapH | 51.63 | kJ/mol | 241.83 | Calculated Property |
| ΔvapH | 49.16 | kJ/mol | 295.09 | Calculated Property |
| ΔvapH | 46.54 | kJ/mol | 348.35 | Calculated Property |
| ΔvapH | 43.74 | kJ/mol | 401.60 | Calculated Property |
| ΔvapH | 40.71 | kJ/mol | 454.86 | Calculated Property |
| ΔvapH | 37.36 | kJ/mol | 508.12 | Calculated Property |
| ΔvapH | 33.53 | kJ/mol | 561.38 | Calculated Property |
| ΔvapH | 28.87 | kJ/mol | 614.63 | Calculated Property |
| ΔvapH | 22.43 | kJ/mol | 667.89 | Calculated Property |
| ΔvapH | 0.00 | kJ/mol | 721.15 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| Pvap | [1.33; 202.66] | kPa | [336.11; 492.86] |
The Yaws Handbook of Vapor Pressure
|
| Equation | ln(Y) = A + B/(T + C) Y is Pvap in kPa, T in K | |||
| Coefficient A | 1.43953e+01 | |||
| Coefficient B | -3.99844e+03 | |||
| Coefficient C | -5.26870e+01 | |||
| Temperature range, min. | 336.11 | |||
| Temperature range, max. | 492.86 | |||
| Pvap | 1.33 | kPa | 336.11 | Calculated Property |
| Pvap | 3.02 | kPa | 353.53 | Calculated Property |
| Pvap | 6.24 | kPa | 370.94 | Calculated Property |
| Pvap | 11.98 | kPa | 388.36 | Calculated Property |
| Pvap | 21.57 | kPa | 405.78 | Calculated Property |
| Pvap | 36.73 | kPa | 423.19 | Calculated Property |
| Pvap | 59.62 | kPa | 440.61 | Calculated Property |
| Pvap | 92.84 | kPa | 458.03 | Calculated Property |
| Pvap | 139.40 | kPa | 475.44 | Calculated Property |
| Pvap | 202.66 | kPa | 492.86 | Calculated Property |
| Pvap | [1.22e-03; 4521.93] | kPa | [241.83; 721.15] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = exp(A + B/T + C·ln(T) + D·T^E) Y is Pvap in kPa, T in K | |||
| Coefficient A | 7.22782e+01 | |||
| Coefficient B | -8.18530e+03 | |||
| Coefficient C | -8.26360e+00 | |||
| Coefficient D | 3.59630e-06 | |||
| Coefficient E | 2.00000e+00 | |||
| Temperature range, min. | 241.83 | |||
| Temperature range, max. | 721.15 | |||
| Pvap | 1.22e-03 | kPa | 241.83 | Calculated Property |
| Pvap | 0.12 | kPa | 295.09 | Calculated Property |
| Pvap | 2.34 | kPa | 348.35 | Calculated Property |
| Pvap | 18.78 | kPa | 401.60 | Calculated Property |
| Pvap | 85.97 | kPa | 454.86 | Calculated Property |
| Pvap | 273.03 | kPa | 508.12 | Calculated Property |
| Pvap | 677.90 | kPa | 561.38 | Calculated Property |
| Pvap | 1420.39 | kPa | 614.63 | Calculated Property |
| Pvap | 2642.71 | kPa | 667.89 | Calculated Property |
| Pvap | 4521.93 | kPa | 721.15 | Calculated Property |
| Pvap | [1.16e-03; 4473.13] | kPa | [241.83; 721.15] |
KDB Vapor Pressure Data
|
| Equation | ln(Y) = A + B/T + C·ln(T) + D·T² + E/T² Y is Pvap in kPa, T in K | |||
| Coefficient A | 7.00267e+01 | |||
| Coefficient B | -8.12638e+03 | |||
| Coefficient C | -7.90248e+00 | |||
| Coefficient D | 3.17808e-06 | |||
| Coefficient E | 0.00000e+00 | |||
| Temperature range, min. | 241.83 | |||
| Temperature range, max. | 721.15 | |||
| Pvap | 1.16e-03 | kPa | 241.83 | Calculated Property |
| Pvap | 0.11 | kPa | 295.09 | Calculated Property |
| Pvap | 2.29 | kPa | 348.35 | Calculated Property |
| Pvap | 18.64 | kPa | 401.60 | Calculated Property |
| Pvap | 86.10 | kPa | 454.86 | Calculated Property |
| Pvap | 274.81 | kPa | 508.12 | Calculated Property |
| Pvap | 683.12 | kPa | 561.38 | Calculated Property |
| Pvap | 1427.65 | kPa | 614.63 | Calculated Property |
| Pvap | 2639.80 | kPa | 667.89 | Calculated Property |
| Pvap | 4473.13 | kPa | 721.15 | Calculated Property |
| Pvap | [0.19; 102.18] | kPa | [302.40; 461.40] |
NIST
|
| Equation | ln(Y) = A + B/(T + C) Y is Pvap in kPa, T in K | |||
| Coefficient A | 1.46702e+01 | |||
| Coefficient B | -4.15263e+03 | |||
| Coefficient C | -4.79330e+01 | |||
| Reference | Young, 1889 | |||
| Comment | Coefficents calculated by NIST from author's data. | |||
| Temperature range, min. | 302.40 | |||
| Temperature range, max. | 461.40 | |||
| Pvap | 0.19 | kPa | 302.40 | Calculated Property |
| Pvap | 0.55 | kPa | 320.07 | Calculated Property |
| Pvap | 1.41 | kPa | 337.73 | Calculated Property |
| Pvap | 3.20 | kPa | 355.40 | Calculated Property |
| Pvap | 6.67 | kPa | 373.07 | Calculated Property |
| Pvap | 12.89 | kPa | 390.73 | Calculated Property |
| Pvap | 23.34 | kPa | 408.40 | Calculated Property |
| Pvap | 39.98 | kPa | 426.07 | Calculated Property |
| Pvap | 65.27 | kPa | 443.73 | Calculated Property |
| Pvap | 102.18 | kPa | 461.40 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| ρl | [1900.19; 581.61] | kg/m3 | [241.83; 721.15] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A / B^(1 + (1 − T/C)^D) Y is ρl in kg/m3, T in K | |||
| Coefficient A | 1.53435e+02 | |||
| Coefficient B | 2.63810e-01 | |||
| Coefficient C | 7.21150e+02 | |||
| Coefficient D | 2.89500e-01 | |||
| Temperature range, min. | 241.83 | |||
| Temperature range, max. | 721.15 | |||
| ρl | 1900.19 | kg/m3 | 241.83 | Calculated Property |
| ρl | 1826.25 | kg/m3 | 295.09 | Calculated Property |
| ρl | 1748.71 | kg/m3 | 348.35 | Calculated Property |
| ρl | 1666.68 | kg/m3 | 401.60 | Calculated Property |
| ρl | 1578.86 | kg/m3 | 454.86 | Calculated Property |
| ρl | 1483.24 | kg/m3 | 508.12 | Calculated Property |
| ρl | 1376.33 | kg/m3 | 561.38 | Calculated Property |
| ρl | 1251.09 | kg/m3 | 614.63 | Calculated Property |
| ρl | 1088.45 | kg/m3 | 667.89 | Calculated Property |
| ρl | 581.61 | kg/m3 | 721.15 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| γ | [0.05; 0.02] | N/m | [242.15; 461.15] |
Jasper (1972), surface tension of pure liquid compounds Compiled value
|
| Equation | Y = A + B·T + C·T² + D·T³ + E·T⁴ Y is γ in N/m, T in K | |||
| Coefficient A | 7.21947e-02 | |||
| Coefficient B | -1.12300e-04 | |||
| Coefficient C | 0.00000e+00 | |||
| Coefficient D | 0.00000e+00 | |||
| Coefficient E | 0.00000e+00 | |||
| Temperature range, min. | 242.15 | |||
| Temperature range, max. | 461.15 | |||
| γ | 0.05 | N/m | 242.15 | Calculated Property |
| γ | 0.04 | N/m | 266.48 | Calculated Property |
| γ | 0.04 | N/m | 290.82 | Calculated Property |
| γ | 0.04 | N/m | 315.15 | Calculated Property |
| γ | 0.03 | N/m | 339.48 | Calculated Property |
| γ | 0.03 | N/m | 363.82 | Calculated Property |
| γ | 0.03 | N/m | 388.15 | Calculated Property |
| γ | 0.03 | N/m | 412.48 | Calculated Property |
| γ | 0.02 | N/m | 436.82 | Calculated Property |
| γ | 0.02 | N/m | 461.15 | Calculated Property |
| γ | [0.05; 7.67e-06] | N/m | [241.83; 716.84] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is γ in N/m, T in K | |||
| Coefficient A | -1.07720e-02 | |||
| Coefficient B | 6.58410e+01 | |||
| Coefficient C | -3.14090e+00 | |||
| Coefficient D | 1.00090e-03 | |||
| Coefficient E | -4.27850e-06 | |||
| Comment | Range stopped where the equation turns negative; ChemSep gives it to 721.15 K. | |||
| Temperature range, min. | 241.83 | |||
| Temperature range, max. | 716.84 | |||
| γ | 0.05 | N/m | 241.83 | Calculated Property |
| γ | 0.04 | N/m | 294.61 | Calculated Property |
| γ | 0.03 | N/m | 347.39 | Calculated Property |
| γ | 0.03 | N/m | 400.17 | Calculated Property |
| γ | 0.02 | N/m | 452.94 | Calculated Property |
| γ | 0.02 | N/m | 505.72 | Calculated Property |
| γ | 0.01 | N/m | 558.50 | Calculated Property |
| γ | 0.01 | N/m | 611.28 | Calculated Property |
| γ | 0.00 | N/m | 664.06 | Calculated Property |
| γ | 7.67e-06 | N/m | 716.84 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| λgas | [0.00; 0.04] | W/m×K | [241.83; 1000.00] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A·T^B / (1 + C/T + D/T²) Y is λgas in W/m×K, T in K | |||
| Coefficient A | 2.68780e-04 | |||
| Coefficient B | 7.89110e-01 | |||
| Coefficient C | 3.73970e+02 | |||
| Coefficient D | 1.87720e+05 | |||
| Temperature range, min. | 241.83 | |||
| Temperature range, max. | 1000.00 | |||
| λgas | 0.00 | W/m×K | 241.83 | Calculated Property |
| λgas | 0.01 | W/m×K | 326.07 | Calculated Property |
| λgas | 0.01 | W/m×K | 410.31 | Calculated Property |
| λgas | 0.01 | W/m×K | 494.55 | Calculated Property |
| λgas | 0.02 | W/m×K | 578.79 | Calculated Property |
| λgas | 0.02 | W/m×K | 663.04 | Calculated Property |
| λgas | 0.03 | W/m×K | 747.28 | Calculated Property |
| λgas | 0.03 | W/m×K | 831.52 | Calculated Property |
| λgas | 0.04 | W/m×K | 915.76 | Calculated Property |
| λgas | 0.04 | W/m×K | 1000.00 | Calculated Property |
| Property | Value | Unit | Temperature (K) | Source |
|---|---|---|---|---|
| λliquid | [0.11; 0.08] | W/m×K | [216.35; 461.60] |
ChemSep v8.3 pure component data Compiled value
|
| Equation | Y = A + exp(B/T + C + D·T + E·T²) Y is λliquid in W/m×K, T in K | |||
| Coefficient A | 7.79230e-02 | |||
| Coefficient B | 1.28480e+03 | |||
| Coefficient C | -1.70820e+01 | |||
| Coefficient D | 5.03620e-02 | |||
| Coefficient E | -6.77900e-05 | |||
| Temperature range, min. | 216.35 | |||
| Temperature range, max. | 461.60 | |||
| λliquid | 0.11 | W/m×K | 216.35 | Calculated Property |
| λliquid | 0.11 | W/m×K | 243.60 | Calculated Property |
| λliquid | 0.10 | W/m×K | 270.85 | Calculated Property |
| λliquid | 0.10 | W/m×K | 298.10 | Calculated Property |
| λliquid | 0.10 | W/m×K | 325.35 | Calculated Property |
| λliquid | 0.09 | W/m×K | 352.60 | Calculated Property |
| λliquid | 0.09 | W/m×K | 379.85 | Calculated Property |
| λliquid | 0.09 | W/m×K | 407.10 | Calculated Property |
| λliquid | 0.08 | W/m×K | 434.35 | Calculated Property |
| λliquid | 0.08 | W/m×K | 461.60 | Calculated Property |
Find more compounds similar to IODOBENZENE.
Note: Cheméo is only indexing the data, follow the source links to retrieve the latest data. The source is also providing more information like the publication year, authors and more.
Take the time to validate and double check the source of the data.
Outlier This icon means
that the value is more than 2 standard deviations away from the
property mean.
Calculated This icon marks a calculated value or equation: a prediction, not a measurement.
Compiled This icon marks a compiled value or equation: taken from a data compilation such as ChemSep, not from an original measurement report.
These property values are available through the Cheméo API. A free account gives you an access key.