Chemical Properties of Cyclohexane, 1,1-dimethyl- (CAS 590-66-9)

Cyclohexane, 1,1-dimethyl-

InChI
InChI=1S/C8H16/c1-8(2)6-4-3-5-7-8/h3-7H2,1-2H3
InChI Key
QEGNUYASOUJEHD-UHFFFAOYSA-N
Formula
C8H16
SMILES
CC1(C)CCCCC1
Molecular Weight1
112.22
CAS
590-66-9
Other Names
  • 1,1-Dimethylcyclohexane
  • Gem-Dimethylcyclohexane
Cheméo is a service of Céondo GmbH, since 2007, we provide simulation, modelling and software development services for the industry. Do not hesitate to contact us for your projects.

Physical Properties

Property Value Unit Source
ω [0.2376; 0.2380]   Show Hide
ω 0.2380 PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
ω 0.2376 Passut and Danner (1973), critical constants and acentric factors Compiled value
ω 0.2376 ChemSep v8.3 pure component data Compiled value
ω 0.2380 KDB
AP 318.550 K KDB
ΔcH°liquid [-5241.30; -5216.00] kJ/mol Show Hide
ΔcH°liquid -5216.00 ± 1.90 kJ/mol NIST Johnson, Prosen, et al., 1947
Corresponding «DELTA»fHºliquid = -218.7 kJ/mol (simple calculation by NIST; no Washburn corrections)
ΔcH°liquid -5241.30 kJ/mol NIST Zubova, 1901
Corresponding «DELTA»fHºliquid = -193. kJ/mol (simple calculation by NIST; no Washburn corrections)
μ 0.00 debye ChemSep v8.3 pure component data Compiled value
ΔfG° [35.23; 35.25] kJ/mol Show Hide
ΔfG° 35.23 kJ/mol ChemSep v8.3 pure component data Compiled value
ΔfG° 35.25 kJ/mol KDB
Δc,grossH 5215.98 kJ/mol KDB
Δc,netH 4863.900 kJ/mol KDB
ΔfH°gas [-181.10; -181.00] kJ/mol Show Hide
ΔfH°gas -181.00 kJ/mol ChemSep v8.3 pure component data Compiled value
ΔfH°gas -181.10 kJ/mol KDB
ΔfusH° 2.01 kJ/mol Joback Calculated Property
ΔvapH° [37.80; 38.80] kJ/mol Show Hide
ΔvapH° 37.97 kJ/mol NISTMajer and Svoboda, 1985
ΔvapH° 38.80 ± 0.10 kJ/mol NISTChickos, Hesse, et al., 1995
ΔvapH° 37.90 kJ/mol NISTKusano and Saito, 1975
ΔvapH° 37.80 kJ/mol NISTReid, 1972
IE [9.42; 9.50] eV Show Hide
IE 9.50 ± 0.05 eV NISTHolmes and Lossing, 1991
IE 9.42 eV NIST Sieck and Mautner(Meot-Ner), 1982
LBLHLM
logPoct/wat 2.977 Crippen Calculated Property
McVol 112.720 ml/mol McGowan Calculated Property
Pc [2938.43; 2964.75] kPa Show Hide
Pc 2938.43 kPa PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Pc 2964.75 kPa Passut and Danner (1973), critical constants and acentric factors Compiled value
Pc 2938.43 kPa ChemSep v8.3 pure component data Compiled value
Pc 2960.00 kPa KDB
Ptriple 0.06 kPa ChemSep v8.3 pure component data Compiled value
Inp [778.00; 797.90]   Show Hide
Inp 789.80 NIST Estel, Mohnke, et al., 1995
100. m/0.25 mm/0.25 «mu»m
Inp 780.00 NISTHilal, Carreira, et al., 1994
Inp 795.00 NIST Litvinenko, Isakova, et al., 1988
He, Chromaton W AW; Column length: 2.4 m
Inp 786.40 NISTLitvinenko, Isakova, et al., 1988
Inp 786.90 NIST Lunskii and Paizanskaya, 1988
He; Column length: 50. m; Column diameter: 0.22 mm
Inp 792.00 NIST Lunskii and Paizanskaya, 1988
He; Column length: 50. m; Column diameter: 0.22 mm
Inp 779.80 NIST Boneva and Dimov, 1986
100. m/0.27 mm/0.9 «mu»m
Inp 782.60 NIST Boneva and Dimov, 1986
100. m/0.27 mm/0.9 «mu»m
Inp 785.40 NIST Boneva and Dimov, 1986
100. m/0.27 mm/0.9 «mu»m
Inp 788.50 NIST Boneva and Dimov, 1986
100. m/0.27 mm/0.9 «mu»m
Inp 787.10 NIST Krupcik, Cellar, et al., 1986
Column length: 180. m; Column diameter: 0.25 mm
Inp 786.10 NIST Lubeck and Sutton, 1983
Column length: 60. m; Column diameter: 0.264 mm
Inp 786.50 NIST Lubeck and Sutton, 1983
60. m/0.259 mm/1. «mu»m
Inp 783.00 NIST Johansen and Ettre, 1982
100. m/0.27 mm/0.20 «mu»m
Inp 783.00 NIST Johansen and Ettre, 1982
55. m/0.27 mm/0.9 «mu»m
Inp 782.00 NIST Johansen and Ettre, 1982
91.4 m/0.31 mm/0.20 «mu»m
Inp 797.60 NIST Nabivach and Kirilenko, 1979
N2; Column length: 50. m
Inp 797.70 NIST Nabivach and Kirilenko, 1979
N2; Column length: 50. m
Inp 791.30 NIST Nabivach and Kirilenko, 1979
N2; Column length: 50. m
Inp 792.70 NIST Nabivach and Kirilenko, 1979
N2; Column length: 50. m
Inp 787.00 NIST Rijks and Cramers, 1974
N2; Column length: 100. m; Column diameter: 0.25 mm
Inp 793.00 NIST Rijks and Cramers, 1974
N2; Column length: 100. m; Column diameter: 0.25 mm
Inp 784.00 NISTSidorov, Petrova, et al., 1972
Inp 788.00 NISTSidorov, Petrova, et al., 1972
Inp 789.00 NISTSidorov, Petrova, et al., 1972
Inp 792.00 NISTSidorov, Petrova, et al., 1972
Inp 796.00 NISTSidorov, Petrova, et al., 1972
Inp 786.00 NIST Dimov and Schopov, 1971
Column length: 100. m; Column diameter: 0.25 mm
Inp 784.00 NISTSidorov, Ivanova, et al., 1971
Inp 784.00 NIST Mitra and Saha, 1970
N2
Inp 792.00 NISTSchomburg, 1966
Inp 778.00 NIST Hayes and Pitzer, 1982
110. m/0.25 mm/0.20 «mu»m, He, 1. K/min; Tstart: 35. C; Tend: 200. C
Inp 780.30 NIST Haagen-Smit Laboratory, 1997
He; Column length: 100. m; Column diameter: 0.2 mm; Program: 5C(10min) => 5C/min => 50C(48min) => 1.5C/min => 195C(91min)
Inp 783.00 NIST Hoekman, 1993
60. m/0.32 mm/1.0 «mu»m, He; Program: -40 C for 12 min; -40 - 125 C at 3 deg.min; 125-185 C at 6 deg/min; 185 - 220 C at 20 deg/min; hold 220 C for 2 min
Inp 784.20 NIST Censullo, Jones, et al., 2003
50. m/0.25 mm/0.5 «mu»m, He, 35. C @ 10. min, 3. K/min, 200. C @ 10. min
Inp 778.31 NIST LECO Corporation, 2003
30. m/0.25 mm/0.25 «mu»m, 40. C @ 2. min, 10. K/min, 250. C @ 2. min
Inp 782.50 NIST Yin, Liu, et al., 2001
N2, 1. K/min; Column length: 80. m; Column diameter: 0.22 mm; Tstart: 30. C; Tend: 130. C
Inp 779.57 NIST Subramaniam, Bochniak, et al., 1994
100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C
Inp 780.00 NIST White, Hackett, et al., 1992
100. m/0.25 mm/0.5 «mu»m, He, 1. K/min; Tstart: 30. C; Tend: 220. C
Inp 778.00 NIST Hayes and Pitzer, 1981
108. m/0.25 mm/0.2 «mu»m, 1. K/min; Tstart: 35. C; Tend: 200. C
Inp 791.12 NIST Hassoun, Pilling, et al., 1999
50. m/0.25 mm/1. «mu»m, He; Program: -50C(2min) => 49.9C/min => 35C(10min) => 3C/min => 200C(2min) => 40C/min => 240C(30min)
Inp 787.00 NIST N/A
N2; Column length: 74.6 m; Column diameter: 0.28 mm
Inp 797.00 NIST Krupcik, Cellar, et al., 1986, 2
Column length: 180. m; Column diameter: 0.25 mm
Inp 784.00 NIST Krupcik, Cellar, et al., 1986, 2
Column length: 180. m; Column diameter: 0.25 mm
Inp 792.00 NIST Krupcik, Cellar, et al., 1986, 2
Column length: 180. m; Column diameter: 0.25 mm
Inp 782.00 NISTWu and Lu, 1984
Inp 788.00 NISTWu and Lu, 1984
Inp 791.00 NIST Vigdergauz and Martynov, 1971
He; Column length: 150. m; Column diameter: 0.35 mm
Inp 782.00 NIST Bramston-Cook, 2013
60. m/0.25 mm/1.0 «mu»m, Helium, 45. C @ 1.45 min, 3.6 K/min, 210. C @ 2.72 min
Inp 780.00 NIST Supelco, 2012
100. m/0.25 mm/0.50 «mu»m, Helium, 20. C @ 15. min, 15. K/min, 220. C @ 30. min
Inp 783.00 NIST Zhang, Ding, et al., 2009
50. m/0.20 mm/0.50 «mu»m, Nitrogen, 35. C @ 15. min, 2. K/min, 200. C @ 10. min
Inp 785.00 NIST Guan, Li, et al., 1995
60. C @ 2. min, 4. K/min; Column length: 50. m; Column diameter: 0.32 mm; Tend: 200. C
Inp 786.60 NIST Krupcik, Cellar, et al., 1986
0.1 K/min; Column length: 100. m; Column diameter: 0.25 mm
Inp 788.60 NIST Krupcik, Cellar, et al., 1986
0.2 K/min; Column length: 100. m; Column diameter: 0.25 mm
Inp 791.70 NIST Krupcik, Cellar, et al., 1986
0.4 K/min; Column length: 100. m; Column diameter: 0.25 mm
Inp 794.10 NIST Krupcik, Cellar, et al., 1986
0.6 K/min; Column length: 100. m; Column diameter: 0.25 mm
Inp 796.10 NIST Krupcik, Cellar, et al., 1986
0.8 K/min; Column length: 100. m; Column diameter: 0.25 mm
Inp 797.90 NIST Krupcik, Cellar, et al., 1986
1. K/min; Column length: 100. m; Column diameter: 0.25 mm
Inp 786.00 NIST Krupcik, Cellar, et al., 1986, 2
0.1 K/min; Column length: 180. m; Column diameter: 0.25 mm; Tstart: 40. C
Inp 787.00 NIST Krupcik, Cellar, et al., 1986, 2
0.2 K/min; Column length: 180. m; Column diameter: 0.25 mm; Tstart: 40. C
Inp 789.00 NIST Krupcik, Cellar, et al., 1986, 2
0.4 K/min; Column length: 180. m; Column diameter: 0.25 mm; Tstart: 40. C
Inp 791.00 NIST Krupcik, Cellar, et al., 1986, 2
0.6 K/min; Column length: 180. m; Column diameter: 0.25 mm; Tstart: 40. C
Inp 793.00 NIST Krupcik, Cellar, et al., 1986, 2
0.8 K/min; Column length: 180. m; Column diameter: 0.25 mm; Tstart: 40. C
Inp 794.00 NIST Krupcik, Cellar, et al., 1986, 2
1.0 K/min; Column length: 180. m; Column diameter: 0.25 mm; Tstart: 40. C
Inp 792.00 NIST Chen, 2008
Program: not specified
Inp 784.00 NIST Chen, 2008
Program: not specified
Inp 791.12 NISTMSDC-RI
S°gas 364.93 J/mol×K NISTHuffman H.M., 1949
S°liquid 267.23 J/mol×K NISTHuffman, Todd, et al., 1949
Tboil [378.70; 393.40] K Show Hide
Tboil 392.69 K ChemSep v8.3 pure component data Compiled value
Tboil 392.70 K KDB
Tboil 392.70 K NISTWeast and Grasselli, 1989
Tboil 392.20 ± 1.00 K NISTMartinez, Alvarez, et al., 1987
Tboil 392.70 K NISTMajer and Svoboda, 1985
Tboil 392.00 ± 2.00 K NISTBeckwith and Lawrence, 1979
Tboil 393.00 ± 2.00 K NISTKrishnamurthi, 1978
Tboil 391.00 ± 5.00 K NISTOnopchenko and Schulz, 1975
Tboil 393.00 ± 1.00 K NISTPuzitskii, Eidus, et al., 1968
Tboil 392.69 ± 0.20 K NISTDesty and Whyman, 1957
Tboil 392.69 ± 0.15 K NISTGlasgow, Gordon, et al., 1957
Tboil 390.90 ± 2.00 K NISTGoering and McCarron, 1956
Tboil 391.00 ± 3.00 K NISTBalandin, Turova-Pollyak, et al., 1955
Tboil 393.00 ± 2.00 K NISTChiurdoglu, Fierens, et al., 1950
Tboil 393.05 ± 0.50 K NISTBazhulin, Ukholin, et al., 1949
Tboil 392.72 ± 0.30 K NISTEvans, 1949
Tboil 392.69 ± 0.02 K NISTForziati and Rossini, 1949
Tboil 392.35 ± 0.30 K NISTBuck, Elsner, et al., 1948
Tboil 392.80 ± 0.40 K NISTShortridge, Craig, et al., 1948
Tboil 392.72 ± 0.30 K NISTBoord, Greenlee, et al., 1945
Tboil 392.60 ± 0.70 K NISTForziati, 1943
Tboil 393.25 ± 0.70 K NISTTurner and Leslie, 1943
Tboil 393.00 ± 4.00 K NISTHibbit and Linstead, 1936
Tboil 393.00 ± 2.00 K NISTMiller, 1935
Tboil 392.60 ± 1.00 K NISTZelinskii, Packendorff, et al., 1935
Tboil 393.40 ± 0.60 K NISTChavanne, Miller, et al., 1931
Tboil 391.40 ± 3.00 K NISTZelinskii, 1923
Tboil 392.40 ± 3.00 K NISTZelinskii, 1923, 2
Tboil 393.00 ± 2.00 K NISTEykman, 1919
Tboil 392.60 ± 2.00 K NISTZelinskii and Lepeschin, 1913
Tboil Outlier 378.70 ± 4.00 K NIST Crossley and Renouf, 1905
Data excluded from overall average
Tc [590.93; 591.15] K Show Hide
Tc 591.00 K PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Tc 590.93 K Passut and Danner (1973), critical constants and acentric factors Compiled value
Tc 591.15 K ChemSep v8.3 pure component data Compiled value
Tc 591.00 K KDB
Tfus [237.95; 240.00] K Show Hide
Tfus 240.00 K Jean-Claude Bradley Open Melting Point Dataset (2014, CC0) Compiled value
Tfus 239.66 K ChemSep v8.3 pure component data Compiled value
Tfus 239.70 K KDB
Tfus 239.13 ± 0.20 K NISTShortridge, Craig, et al., 1948
Tfus 239.61 ± 0.07 K NISTStreiff, Murphy, et al., 1947
Tfus Outlier 237.95 ± 0.50 K NISTBoord, Greenlee, et al., 1945
Ttriple [239.66; 239.82] K Show Hide
Ttriple 239.82 K Staveley, Lobo and Calado (1981), triple points Compiled value
Ttriple 239.66 K ChemSep v8.3 pure component data Compiled value
Ttriple 239.81 ± 0.05 K NIST Huffman, Todd, et al., 1949, 2
Crystal phase 1 phase
Ttriple 239.81 ± 0.05 K NIST Huffman, 1948
Crystal phase 1 phase
Ttriple 239.81 ± 0.05 K NIST Huffman, Todd, et al., 1949
Crystal phase 1 phase
UQi 4.40 ChemSep v8.3 pure component data Compiled value
URi 5.39 ChemSep v8.3 pure component data Compiled value
Vc [0.416; 0.450] m3/kmol Show Hide
Vc 0.450 m3/kmol PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Vc 0.450 m3/kmol ChemSep v8.3 pure component data Compiled value
Vc 0.416 m3/kmol KDB
Zc [0.2505880; 0.2690000]   Show Hide
Zc 0.2690000 ChemSep v8.3 pure component data Compiled value
Zc 0.2505880 KDB
Zra 0.27 ChemSep v8.3 pure component data Compiled value

Cheméo can also estimate Log10 of Water solubility in mol/l for this compound, but it falls outside the models' validated range, so it is not shown here. Open the prediction tool to compute it on demand.

Temperature Dependent Properties

Property Value Unit Temperature (K) Source
Cp,liquid [187.40; 210.20] J/mol×K [250.00; 300.00] Show Hide
Cp,liquid 187.40 J/mol×K 250.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 12-029
Cp,liquid 191.60 J/mol×K 260.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 12-029
Cp,liquid 196.00 J/mol×K 270.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 12-029
Cp,liquid 197.40 J/mol×K 273.15 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 12-029
Cp,liquid 200.60 J/mol×K 280.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 12-029
Cp,liquid 205.30 J/mol×K 290.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 12-029
Cp,liquid 209.30 J/mol×K 298.15 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 12-029
Cp,liquid 209.24 J/mol×K 298.15 NIST Huffman, Todd, et al., 1949
T = 12 to 310 K.
Cp,liquid 210.20 J/mol×K 300.00 Zabransky, M., Ruzicka, V., Majer, V. and Domalski, E. (1997), Heat Capacity of Liquids: Critical Review and Recommended Values - Monograph No. 6, J. Phys. & Chem. Ref. Data (JPCRD), National Institute of Standards and Technology, Gaithersburg, MD
Zabransky Mono-6 group 12-029
ΔfusH [2.01; 5.98] kJ/mol [153.20; 239.80] Show Hide
ΔfusH 5.98 kJ/mol 153.20 NISTDomalski and Hearing, 1996
ΔfusH 2.01 kJ/mol 239.80 NISTDomalski and Hearing, 1996
ΔfusH 2.01 kJ/mol 239.80 NIST
ΔvapH [32.51; 39.60] kJ/mol [287.00; 392.70] Show Hide
ΔvapH 39.60 ± 0.10 kJ/mol 287.00 NISTChickos, Hesse, et al., 1995
ΔvapH 36.60 kJ/mol 354.00 NIST Stephenson and Malanowski, 1987
See also Forziati, Norris, et al., 1949.
ΔvapH 32.59 kJ/mol 392.70 KDB
ΔvapH 32.51 kJ/mol 392.70 NISTMajer and Svoboda, 1985
n0 1.42662 298.15 KDB
ρl 785.00 kg/m3 289.00 KDB
ΔfusS [8.37; 39.05] J/mol×K [153.20; 239.80] Show Hide
ΔfusS 39.05 J/mol×K 153.20 NISTDomalski and Hearing, 1996
ΔfusS 8.37 J/mol×K 239.80 NIST
γ 0.02 N/m 293.20 KDB

Correlations

Property Value Unit Temperature (K) Source
Cp,gas [112.61; 496.65] J/mol×K [200.00; 1500.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is Cp,gas in J/mol×K, T in K
Coefficient A9.76270e+01
Coefficient B-8.47070e+02
Coefficient C7.04424e+00
Coefficient D-5.37360e-04
Coefficient E1.40240e-07
Temperature range, min.200.00
Temperature range, max.1500.00
Cp,gas 112.61 J/mol×K 200.00 Calculated Property
Cp,gas 180.44 J/mol×K 344.44 Calculated Property
Cp,gas 258.79 J/mol×K 488.89 Calculated Property
Cp,gas 324.11 J/mol×K 633.33 Calculated Property
Cp,gas 374.08 J/mol×K 777.78 Calculated Property
Cp,gas 411.64 J/mol×K 922.22 Calculated Property
Cp,gas 440.20 J/mol×K 1066.67 Calculated Property
Cp,gas 462.57 J/mol×K 1211.11 Calculated Property
Cp,gas 480.86 J/mol×K 1355.56 Calculated Property
Cp,gas 496.65 J/mol×K 1500.00 Calculated Property
Property Value Unit Temperature (K) Source
Cp,liquid [183.21; 263.07] J/mol×K [239.66; 392.70] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is Cp,liquid in J/mol×K, T in K
Coefficient A1.08760e+02
Coefficient B-1.44190e+00
Coefficient C2.81934e+00
Coefficient D7.15960e-03
Coefficient E-3.81480e-06
Temperature range, min.239.66
Temperature range, max.392.70
Cp,liquid 183.21 J/mol×K 239.66 Calculated Property
Cp,liquid 190.21 J/mol×K 256.66 Calculated Property
Cp,liquid 197.68 J/mol×K 273.67 Calculated Property
Cp,liquid 205.61 J/mol×K 290.67 Calculated Property
Cp,liquid 214.01 J/mol×K 307.68 Calculated Property
Cp,liquid 222.89 J/mol×K 324.68 Calculated Property
Cp,liquid 232.24 J/mol×K 341.69 Calculated Property
Cp,liquid 242.06 J/mol×K 358.69 Calculated Property
Cp,liquid 252.34 J/mol×K 375.70 Calculated Property
Cp,liquid 263.07 J/mol×K 392.70 Calculated Property
Property Value Unit Temperature (K) Source
η [0.0019903; 0.0001865] Pa×s [239.66; 472.92] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = exp(A + B/T + C·ln(T) + D·T^E)
Y is η in Pa×s, T in K
Coefficient A-7.70340e+00
Coefficient B1.04240e+03
Coefficient C-5.31770e-01
Coefficient D8.37650e-07
Coefficient E2.00000e+00
Temperature range, min.239.66
Temperature range, max.472.92
η 0.0019903 Pa×s 239.66 Calculated Property
η 0.0012463 Pa×s 265.58 Calculated Property
η 0.0008468 Pa×s 291.50 Calculated Property
η 0.0006124 Pa×s 317.41 Calculated Property
η 0.0004650 Pa×s 343.33 Calculated Property
η 0.0003672 Pa×s 369.25 Calculated Property
η 0.0002992 Pa×s 395.17 Calculated Property
η 0.0002503 Pa×s 421.08 Calculated Property
η 0.0002141 Pa×s 447.00 Calculated Property
η 0.0001865 Pa×s 472.92 Calculated Property
Property Value Unit Temperature (K) Source
ΔvapH [41.12; 0.00] kJ/mol [239.66; 591.15] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc
Y is ΔvapH in kJ/mol, T in K
Coefficient A7.58150e+01
Coefficient B2.76640e+00
Coefficient C-6.02180e+00
Coefficient D6.15980e+00
Coefficient E-2.40930e+00
Critical temperature, Tc (K)5.91150e+02
Temperature range, min.239.66
Temperature range, max.591.15
ΔvapH 41.12 kJ/mol 239.66 Calculated Property
ΔvapH 38.96 kJ/mol 278.71 Calculated Property
ΔvapH 36.86 kJ/mol 317.77 Calculated Property
ΔvapH 34.65 kJ/mol 356.82 Calculated Property
ΔvapH 32.22 kJ/mol 395.88 Calculated Property
ΔvapH 29.44 kJ/mol 434.93 Calculated Property
ΔvapH 26.21 kJ/mol 473.99 Calculated Property
ΔvapH 22.29 kJ/mol 513.04 Calculated Property
ΔvapH 16.89 kJ/mol 552.10 Calculated Property
ΔvapH 0.00 kJ/mol 591.15 Calculated Property
Property Value Unit Temperature (K) Source
Pvap [1.33; 202.66] kPa [282.96; 421.08] The Yaws Handbook of Vapor Pressure Show Hide
Equationln(Y) = A + B/(T + C)
Y is Pvap in kPa, T in K
Coefficient A1.37664e+01
Coefficient B-3.13309e+03
Coefficient C-5.05140e+01
Temperature range, min.282.96
Temperature range, max.421.08
Pvap 1.33 kPa 282.96 Calculated Property
Pvap 3.07 kPa 298.31 Calculated Property
Pvap 6.42 kPa 313.65 Calculated Property
Pvap 12.38 kPa 329.00 Calculated Property
Pvap 22.28 kPa 344.35 Calculated Property
Pvap 37.82 kPa 359.69 Calculated Property
Pvap 61.07 kPa 375.04 Calculated Property
Pvap 94.44 kPa 390.39 Calculated Property
Pvap 140.65 kPa 405.73 Calculated Property
Pvap 202.66 kPa 421.08 Calculated Property
Pvap [0.06; 2938.71] kPa [239.66; 591.15] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = exp(A + B/T + C·ln(T) + D·T^E)
Y is Pvap in kPa, T in K
Coefficient A7.46102e+01
Coefficient B-6.94250e+03
Coefficient C-8.90000e+00
Coefficient D5.49410e-06
Coefficient E2.00000e+00
Temperature range, min.239.66
Temperature range, max.591.15
Pvap 0.06 kPa 239.66 Calculated Property
Pvap 1.02 kPa 278.71 Calculated Property
Pvap 7.70 kPa 317.77 Calculated Property
Pvap 34.67 kPa 356.82 Calculated Property
Pvap 110.22 kPa 395.88 Calculated Property
Pvap 275.36 kPa 434.93 Calculated Property
Pvap 580.00 kPa 473.99 Calculated Property
Pvap 1080.45 kPa 513.04 Calculated Property
Pvap 1840.82 kPa 552.10 Calculated Property
Pvap 2938.71 kPa 591.15 Calculated Property
Pvap [0.06; 2949.34] kPa [239.66; 591.15] KDB Vapor Pressure Data Show Hide
Equationln(Y) = A + B/T + C·ln(T) + D·T² + E/T²
Y is Pvap in kPa, T in K
Coefficient A7.41338e+01
Coefficient B-6.91909e+03
Coefficient C-8.82986e+00
Coefficient D5.47352e-06
Coefficient E0.00000e+00
Temperature range, min.239.66
Temperature range, max.591.15
Pvap 0.06 kPa 239.66 Calculated Property
Pvap 1.02 kPa 278.71 Calculated Property
Pvap 7.70 kPa 317.77 Calculated Property
Pvap 34.63 kPa 356.82 Calculated Property
Pvap 110.11 kPa 395.88 Calculated Property
Pvap 275.26 kPa 434.93 Calculated Property
Pvap 580.28 kPa 473.99 Calculated Property
Pvap 1082.05 kPa 513.04 Calculated Property
Pvap 1845.50 kPa 552.10 Calculated Property
Pvap 2949.34 kPa 591.15 Calculated Property
Pvap [6.42; 104.00] kPa [313.70; 393.67] NIST Show Hide
Equationln(Y) = A + B/(T + C)
Y is Pvap in kPa, T in K
Coefficient A1.36478e+01
Coefficient B-3.04830e+03
Coefficient C-5.50970e+01
ReferenceForziati, Norris, et al., 1949, 2
Temperature range, min.313.70
Temperature range, max.393.67
Pvap 6.42 kPa 313.70 Calculated Property
Pvap 9.50 kPa 322.59 Calculated Property
Pvap 13.71 kPa 331.47 Calculated Property
Pvap 19.33 kPa 340.36 Calculated Property
Pvap 26.70 kPa 349.24 Calculated Property
Pvap 36.18 kPa 358.13 Calculated Property
Pvap 48.18 kPa 367.01 Calculated Property
Pvap 63.16 kPa 375.90 Calculated Property
Pvap 81.59 kPa 384.78 Calculated Property
Pvap 104.00 kPa 393.67 Calculated Property
Pvap [6.42; 104.00] kPa [313.70; 393.67] NIST Show Hide
Equationln(Y) = A + B/(T + C)
Y is Pvap in kPa, T in K
Coefficient A1.36478e+01
Coefficient B-3.04830e+03
Coefficient C-5.50970e+01
ReferenceForziati, Norris, et al., 1949
Temperature range, min.313.70
Temperature range, max.393.67
Pvap 6.42 kPa 313.70 Calculated Property
Pvap 9.50 kPa 322.59 Calculated Property
Pvap 13.71 kPa 331.47 Calculated Property
Pvap 19.33 kPa 340.36 Calculated Property
Pvap 26.70 kPa 349.24 Calculated Property
Pvap 36.18 kPa 358.13 Calculated Property
Pvap 48.18 kPa 367.01 Calculated Property
Pvap 63.16 kPa 375.90 Calculated Property
Pvap 81.59 kPa 384.78 Calculated Property
Pvap 104.00 kPa 393.67 Calculated Property
Property Value Unit Temperature (K) Source
ρl [823.65; 247.48] kg/m3 [239.66; 591.15] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A / B^(1 + (1 − T/C)^D)
Y is ρl in kg/m3, T in K
Coefficient A6.17988e+01
Coefficient B2.49710e-01
Coefficient C5.91150e+02
Coefficient D2.75340e-01
Temperature range, min.239.66
Temperature range, max.591.15
ρl 823.65 kg/m3 239.66 Calculated Property
ρl 792.65 kg/m3 278.71 Calculated Property
ρl 760.03 kg/m3 317.77 Calculated Property
ρl 725.41 kg/m3 356.82 Calculated Property
ρl 688.20 kg/m3 395.88 Calculated Property
ρl 647.51 kg/m3 434.93 Calculated Property
ρl 601.78 kg/m3 473.99 Calculated Property
ρl 547.86 kg/m3 513.04 Calculated Property
ρl 477.21 kg/m3 552.10 Calculated Property
ρl 247.48 kg/m3 591.15 Calculated Property
Property Value Unit Temperature (K) Source
γ [0.03; 1.05e-05] N/m [239.66; 586.58] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is γ in N/m, T in K
Coefficient A-8.06430e-02
Coefficient B-3.16360e+01
Coefficient C-1.69410e+00
Coefficient D-1.78160e-03
Coefficient E8.00670e-07
CommentRange stopped where the equation turns negative; ChemSep gives it to 591.15 K.
Temperature range, min.239.66
Temperature range, max.586.58
γ 0.03 N/m 239.66 Calculated Property
γ 0.03 N/m 278.21 Calculated Property
γ 0.02 N/m 316.75 Calculated Property
γ 0.02 N/m 355.30 Calculated Property
γ 0.01 N/m 393.85 Calculated Property
γ 0.01 N/m 432.39 Calculated Property
γ 0.01 N/m 470.94 Calculated Property
γ 0.01 N/m 509.49 Calculated Property
γ 0.00 N/m 548.03 Calculated Property
γ 1.05e-05 N/m 586.58 Calculated Property
Property Value Unit Temperature (K) Source
λgas [0.01; 0.09] W/m×K [239.66; 1000.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A·T^B / (1 + C/T + D/T²)
Y is λgas in W/m×K, T in K
Coefficient A1.07900e-02
Coefficient B3.94330e-01
Coefficient C-7.43600e+01
Coefficient D8.05370e+05
Temperature range, min.239.66
Temperature range, max.1000.00
λgas 0.01 W/m×K 239.66 Calculated Property
λgas 0.01 W/m×K 324.14 Calculated Property
λgas 0.02 W/m×K 408.62 Calculated Property
λgas 0.03 W/m×K 493.11 Calculated Property
λgas 0.04 W/m×K 577.59 Calculated Property
λgas 0.05 W/m×K 662.07 Calculated Property
λgas 0.06 W/m×K 746.55 Calculated Property
λgas 0.07 W/m×K 831.04 Calculated Property
λgas 0.08 W/m×K 915.52 Calculated Property
λgas 0.09 W/m×K 1000.00 Calculated Property
Property Value Unit Temperature (K) Source
λliquid [0.13; 0.10] W/m×K [239.66; 392.70] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is λliquid in W/m×K, T in K
Coefficient A-5.70110e-03
Coefficient B-8.05490e+01
Coefficient C-9.82120e-01
Coefficient D-3.00940e-03
Coefficient E4.87330e-07
Temperature range, min.239.66
Temperature range, max.392.70
λliquid 0.13 W/m×K 239.66 Calculated Property
λliquid 0.12 W/m×K 256.66 Calculated Property
λliquid 0.12 W/m×K 273.67 Calculated Property
λliquid 0.12 W/m×K 290.67 Calculated Property
λliquid 0.11 W/m×K 307.68 Calculated Property
λliquid 0.11 W/m×K 324.68 Calculated Property
λliquid 0.11 W/m×K 341.69 Calculated Property
λliquid 0.10 W/m×K 358.69 Calculated Property
λliquid 0.10 W/m×K 375.70 Calculated Property
λliquid 0.10 W/m×K 392.70 Calculated Property

Similar Compounds

Cyclooctane, 1,1-dimethyl. 1,1,10,10-Tetramethylcyclooctadecane. Cycloheptane, 1,1-dimethyl. Cyclododecane, 1,1,4,4-tetramethyl-. 1,1,4,4,10,10,13,13-Octamethyl-cyclooctadecane. Undecane, 6,6-dimethyl-. Undecane, 4,4-dimethyl-. Undecane, 5,5-dimethyl-. Cyclohexane, 1-ethyl-1-methyl-. 3,3-Dimethyltricosane. 3,3-Dimethylnonadecane. 3,3-Dimethylhenicosane. Undecane, 3,3-dimethyl-. Nonane, 3,3-dimethyl. 3,3-Dimethylpentadecane.

Find more compounds similar to Cyclohexane, 1,1-dimethyl-.

Sources

Note: Cheméo is only indexing the data, follow the source links to retrieve the latest data. The source is also providing more information like the publication year, authors and more. Take the time to validate and double check the source of the data.
Outlier This icon means that the value is more than 2 standard deviations away from the property mean.
Calculated This icon marks a calculated value or equation: a prediction, not a measurement.
Compiled This icon marks a compiled value or equation: taken from a data compilation such as ChemSep, not from an original measurement report.
These property values are available through the Cheméo API. A free account gives you an access key.