Chemical Properties of Tetrahydrofuran (CAS 109-99-9)

Tetrahydrofuran

InChI
InChI=1S/C4H8O/c1-2-4-5-3-1/h1-4H2
InChI Key
WYURNTSHIVDZCO-UHFFFAOYSA-N
Formula
C4H8O
SMILES
C1CCOC1
Molecular Weight1
72.11
CAS
109-99-9
Other Names
  • 1,4-epoxybutane
  • Butane «alpha»,«delta»-oxide
  • Butane, 1,4-epoxy-
  • Cyclotetramethylene oxide
  • Diethylene oxide
  • Dynasolve 150
  • Furan, tetrahydro-
  • Furanidine
  • Hydrofuran
  • NCI-C60560
  • NSC 57858
  • Rcra waste number U213
  • THF
  • THF (tetrahydrofuran)
  • Tetrahydrofuraan
  • Tetrahydrofurane
  • Tetrahydrofuranne
  • Tetraidrofurano
  • UN 2056
  • oxacyclopentane
  • oxolane
  • tetramethylene oxide
Cheméo is a service of Céondo GmbH, since 2007, we provide simulation, modelling and software development services for the industry. Do not hesitate to contact us for your projects.

Contents

  1. Physical Properties
  2. Temperature Dependent Properties
  3. Pressure Dependent Properties
  4. Datasets
  5. Correlations
  6. Similar Compounds
  7. Mixtures
  8. Sources

Physical Properties

Property Value Unit Source
ω [0.2170; 0.2250]   Show Hide
ω 0.2170 PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
ω 0.2250 ChemSep v8.3 pure component data Compiled value
PAff 822.10 kJ/mol NISTHunter and Lias, 1998
Tig 594.15 K NCMS SOLV-DB
BasG 794.70 kJ/mol NISTHunter and Lias, 1998
ΔcH°gas -2533.20 ± 0.67 kJ/mol NIST Pell and Pilcher, 1965
Corresponding «DELTA»fHºgas = -184.2 kJ/mol (simple calculation by NIST; no Washburn corrections)
ΔcH°liquid [-2505.80; -2501.20] kJ/mol Show Hide
ΔcH°liquid -2505.80 ± 2.10 kJ/mol NIST Cass, Fletcher, et al., 1958
Reanalyzed by Cox and Pilcher, 1970, Original value = -2505. ± 2. kJ/mol; Corresponding «DELTA»fHºliquid = -211.5 kJ/mol (simple calculation by NIST; no Washburn corrections)
ΔcH°liquid -2501.20 ± 0.84 kJ/mol NIST Skuratov, Strepikheev, et al., 1957
Reanalyzed by Cox and Pilcher, 1970, Original value = -2502. ± 0.4 kJ/mol; Combustion at 293 K; Corresponding «DELTA»fHºliquid = -216.1 kJ/mol (simple calculation by NIST; no Washburn corrections)
μ 1.63 debye ChemSep v8.3 pure component data Compiled value
η [0.0004490; 0.0004750] Pa×s Show Hide
η 0.0004750 Pa×s A volumetric and viscosity study for the binary mixtures of 1-hexyl-3-methylimidazolium tetrafluoroborate with some molecular solvents
Standard Ambient Temperature and Pressure (SATP)
η 0.0004740 Pa×s Densities, speeds of sound and viscosities of binary mixtures of tetrahydrofuran with 1-hexanol, 1-octanol and 1-decanol at T = (298.15 to 313.15) K
Standard Ambient Temperature and Pressure (SATP)
η 0.0004490 Pa×s Viscosity, Density, Speed of Sound, and Refractive Index of Binary Mixtures of Organic Solvent + Ionic Liquid, 1-Butyl-3-methylimidazolium Hexafluorophosphate at 298.15 K
Standard Ambient Temperature and Pressure (SATP)
εr 7.58 NCMS SOLV-DB
Tflash,cc 259.15 K NCMS SOLV-DB
ΔfG° -79.69 kJ/mol ChemSep v8.3 pure component data Compiled value
ΔfH°gas [-184.20; -184.18] kJ/mol Show Hide
ΔfH°gas -184.18 kJ/mol ChemSep v8.3 pure component data Compiled value
ΔfH°gas -184.20 ± 0.71 kJ/mol NISTPell and Pilcher, 1965
ΔfusH° 6.96 kJ/mol Joback Calculated Property
ΔvapH° [32.00; 32.90] kJ/mol Show Hide
ΔvapH° 32.01 kJ/mol NCMS SOLV-DB
ΔvapH° 32.16 kJ/mol NISTMajer and Svoboda, 1985
ΔvapH° 32.00 kJ/mol NISTHossenlopp and Scott, 1981
ΔvapH° 32.90 kJ/mol NISTMoiseev and Antonova, 1970
ΔvapH° 32.00 kJ/mol NISTCass, Fletcher, et al., 1958
IE [9.38; 9.74] eV Show Hide
IE 9.40 ± 0.02 eV NISTN/A
IE 9.38 ± 0.05 eV NISTHolmes and Lossing, 1991
IE 9.38 eV NISTBehan, Dean, et al., 1976
IE 9.41 eV NISTDoucet, Sauvageau, et al., 1972
IE 9.42 ± 0.01 eV NISTHernandez, 1963
IE 9.54 eV NISTWatanabe, Nakayama, et al., 1962
IE 9.74 eV NIST Kimura, Katsumata, et al., 1981
Vertical value
IE 9.71 eV NIST Gerson, Worley, et al., 1978
Vertical value
IE 9.65 eV NIST Schmidt and Schweig, 1974
Vertical value
IE 9.53 eV NIST Pignataro and Distefano, 1974
Vertical value
IE 9.57 ± 0.02 eV NIST Bain, Bunzli, et al., 1973
Vertical value
log10WS 0.49 Estimated Solubility
logPoct/wat 0.460 NCMS SOLV-DB
McVol 62.230 ml/mol McGowan Calculated Property
NFPA Fire 3 NCMS SOLV-DB
NFPA Health 2 NCMS SOLV-DB
NFPA Safety 1 NCMS SOLV-DB
Pc [5187.84; 5190.00] kPa Show Hide
Pc 5190.00 kPa IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 7 Compiled value
Pc 5187.84 kPa PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Pc 5190.00 kPa ChemSep v8.3 pure component data Compiled value
Pc 5190.00 ± 50.66 kPa NISTKobe, Ravicz, et al., 1956
pKa -2.08 NCMS SOLV-DB
Ptriple 1.96e-04 kPa ChemSep v8.3 pure component data Compiled value
Inp [608.00; 640.00]   Show Hide
Inp 609.90 NIST Dallos, Sisak, et al., 2000
He; Column length: 3.3 m
Inp 609.80 NIST Reddy, Dutoit, et al., 1992
Chromosorb G HP; Column length: 3.3 m
Inp 611.00 NIST Dutoit, 1991
Column length: 3.7 m
Inp 630.00 NIST Tiess, 1984
Ar, Gas Chrom Q (80-100 mesh); Column length: 3. m
Inp 626.00 NIST Winskowski, 1983
Gaschrom Q; Column length: 2. m
Inp 620.00 NIST Bogoslovsky, Anvaer, et al., 1978
Celite 545
Inp 631.00 NIST Bogoslovsky, Anvaer, et al., 1978
Celite 545
Inp 618.00 NISTBogoslovsky, Anvaer, et al., 1978
Inp 612.90 NIST Riedo, Fritz, et al., 1976
He, Chromosorb; Column length: 2.4 m
Inp 623.20 NIST Riedo, Fritz, et al., 1976
He, Chromosorb; Column length: 2.4 m
Inp 640.00 NIST Jonas, Janák, et al., 1966
H2
Inp 640.00 NIST Janák, Jonas, et al., 1965
H2, Celite
Inp 631.00 NIST Wehrli and Kováts, 1959
Celite; Column length: 2.25 m
Inp 618.00 NIST Wehrli and Kováts, 1959
Celite; Column length: 2.25 m
Inp 617.00 NIST Shimadzu, 2003
25. m/0.2 mm/0.25 «mu»m, He, 50. C @ 5. min, 4. K/min; Tend: 200. C
Inp 621.00 NIST Rembold, Wallner, et al., 1989
30. m/0.25 mm/0.25 «mu»m, He, 0. C @ 12. min, 12. K/min; Tend: 250. C
Inp 609.00 NIST Yamaguchi and Shibamoto, 1979
N2, 2. K/min; Column length: 70. m; Column diameter: 0.28 mm; Tstart: 80. C; Tend: 200. C
Inp 610.00 NIST Yamaguchi and Shibamoto, 1979
N2, 2. K/min; Column length: 70. m; Column diameter: 0.28 mm; Tstart: 80. C; Tend: 200. C
Inp 632.00 NIST Elmore, Campo, et al., 2002
60. m/0.25 mm/0.25 «mu»m, He, 40. C @ 2. min, 4. K/min; Tend: 280. C
Inp 629.00 NIST Elmore, Mottram, et al., 2000
60. m/0.25 mm/0.25 «mu»m, He, 40. C @ 2. min, 4. K/min; Tend: 280. C
Inp 623.00 NIST Engel, Baty, et al., 2002
30. m/0.25 mm/0.25 «mu»m, He; Program: 5C(5min) => 3C/min => 20C => 5C/min => 100C 15C/min => 150C (5min)
Inp 622.00 NISTLebrón-Aguilar, Quintanilla-López, et al., 2007
Inp 626.00 NISTLebrón-Aguilar, Quintanilla-López, et al., 2007
Inp 629.00 NISTLebrón-Aguilar, Quintanilla-López, et al., 2007
Inp 620.00 NISTLebrón-Aguilar, Quintanilla-López, et al., 2007
Inp 620.00 NIST Shimadzu, 2003, 2
60. m/0.32 mm/1. «mu»m, He
Inp 624.00 NIST Kurdina, Markovich, et al., 1969
not specified, not specified
Inp 630.00 NIST Anderson, 1968
Helium, Gas-Pak (60-80 mesh); Column length: 3.0 m
Inp 614.00 NIST Leffingwell and Alford, 2011
60. m/0.32 mm/0.25 «mu»m, Helium, 2. K/min, 260. C @ 28. min; Tstart: 30. C
Inp 618.00 NIST Leffingwell and Alford, 2011
60. m/0.32 mm/0.25 «mu»m, Helium, 2. K/min, 260. C @ 28. min; Tstart: 30. C
Inp 620.00 NIST van Loon, Linssen, et al., 2005
60. m/0.25 mm/0.25 «mu»m, He, 40. C @ 4. min, 4. K/min, 270. C @ 5. min
Inp 633.00 NIST Jung, Wichmann, et al., 1999
25. m/0.20 mm/0.33 «mu»m, 50. C @ 3. min, 5. K/min; Tend: 180. C
Inp 615.00 NIST Habu, Flath, et al., 1985
3. K/min; Column length: 50. m; Column diameter: 0.32 mm; Tstart: 0. C; Tend: 250. C
Inp 618.00 NIST Donetzhuber, Johansson, et al., 1976
Nitrogen, 3. K/min, 130. C @ 40. min; Column length: 111. m; Column diameter: 0.76 mm; Initial hold: 8. min
Inp 619.00 NIST Farkas, Héberger, et al., 2004
Program: not specified
Inp 636.00 NIST Vinogradov, 2004
Program: not specified
Inp 615.00 NIST Flanagan, Streete, et al., 1997
60. m/0.53 mm/5. «mu»m, He; Program: 40C(6min) => 5C/min => 80C => 10C/min => 200C
Inp 624.00 NIST Mateo and Zumalacárregui, 1996
50. m/0.32 mm/0.25 «mu»m, He; Program: 40C (10min) => 3C/min => 95C => 10C/min => 270C (10min)
Inp 615.00 NIST Strete, Ruprah, et al., 1992
60. m/0.53 mm/5.0 «mu»m, Helium; Program: 40 0C (6 min) 5 0C/min -> 80 0C 10 0C/min -> 200 0C
Inp 638.00 NIST Strete, Ruprah, et al., 1992
60. m/0.53 mm/5.0 «mu»m, Helium; Program: not specified
Inp 608.00 NIST Kawai, Ishida, et al., 1991
60. m/0.25 mm/0.25 «mu»m; Program: not specified
Inp 612.00 NIST Kawai, Ishida, et al., 1991
60. m/0.25 mm/0.25 «mu»m; Program: not specified
Inp 629.00 NIST Weller and Wolf, 1989
40. m/0.25 mm/0.25 «mu»m, He; Program: 30 0C (1 min) 15 0C/min -> 45 0C 3 0C/min -> 120 0C
Inp 627.00 NIST P'yanova, Zvereva, et al., 1987
Column length: 25. m; Column diameter: 0.25 mm; Program: not specified
Inp 638.00 NIST Ramsey and Flanagan, 1982
Program: not specified
Inp 617.00 NISTMSDC-RI
Inp 622.00 NISTMSDC-RI
Inp 624.00 NISTMSDC-RI
Inp 619.00 NISTMSDC-RI
Inp 638.00 NISTMSDC-RI
Inp 632.00 NISTMSDC-RI
Ip [829.00; 915.00]   Show Hide
Ip 868.00 NIST Annino and Villalobos, 1999
31.3 m/0.53 mm/0.54 «mu»m
Ip 895.00 NIST Goebel, 1982
N2, Kieselgur (60-100 mesh); Column length: 2. m
Ip 888.00 NIST Anderson, Jurel, et al., 1973
He, Celite 545 (44-60 mesh); Column length: 3. m
Ip 907.00 NIST Anderson, Jurel, et al., 1973
He, Celite 545 (44-60 mesh); Column length: 3. m
Ip 915.00 NIST Anderson, Jurel, et al., 1973
He, Celite 545 (44-60 mesh); Column length: 3. m
Ip 900.00 NIST Anderson, Jurel, et al., 1973
He, Celite 545 (44-60 mesh); Column length: 3. m
Ip 903.00 NIST Anderson, Jurel, et al., 1973
He, Celite 545 (44-60 mesh); Column length: 3. m
Ip 868.00 NIST Shimadzu, 2003
25. m/0.2 mm/0.25 «mu»m, He, 50. C @ 5. min, 4. K/min; Tend: 200. C
Ip 861.00 NIST Umano, Hagi, et al., 1994
He, 40. C @ 2. min, 2. K/min; Column length: 60. m; Column diameter: 0.25 mm; Tend: 200. C
Ip 866.00 NIST Yamaguchi and Shibamoto, 1979
N2, 2. K/min; Column length: 50. m; Column diameter: 0.28 mm; Tstart: 80. C; Tend: 200. C
Ip 867.00 NIST Yamaguchi and Shibamoto, 1979
N2, 2. K/min; Column length: 50. m; Column diameter: 0.28 mm; Tstart: 80. C; Tend: 200. C
Ip 854.00 NIST Alasalvar, Taylor, et al., 2005
60. m/0.25 mm/0.25 «mu»m, 35. C @ 4. min, 3. K/min; Tend: 203. C
Ip 857.00 NIST Elmore, Nisyrios, et al., 2005
60. m/0.25 mm/0.25 «mu»m, He, 40. C @ 2. min, 4. K/min; Tend: 280. C
Ip 887.00 NIST Shimadzu, 2003, 2
50. m/0.32 mm/1. «mu»m, He
Ip 829.00 NIST Welke, Manfroi, et al., 2012
30. m/0.25 mm/0.25 «mu»m, Helium; Program: not specified
Ip 854.00 NIST Johanningsmeier and McFeeters, 2011
30. m/0.25 mm/0.25 «mu»m, Helium; Program: 40 0C (2 min) 5 0C/min -> 140 0C 10 0C/min -> 250 0C (3 min)
Ip 898.00 NIST Vinogradov, 2004
Program: not specified
Ip 872.00 NIST Ramsey and Flanagan, 1982
Program: not specified
Ip 868.00 NISTMSDC-RI
Ip 900.00 NISTMSDC-RI
Ip 829.00 NISTMSDC-RI
S°gas 301.70 ± 1.70 J/mol×K NIST Clegg G.A., 1968
Other third-law entropy values at 298.15 K evaluated from calorimetric data are 299.1 J/mol*K [ Chao J., 1986] and 288(1) J/mol*K [ Lebedev B.V., 1978].
S°liquid [203.80; 203.90] J/mol×K Show Hide
S°liquid 203.80 J/mol×K NISTLebedev, Lityagov, et al., 1979
S°liquid 203.90 J/mol×K NISTLebedev, Rabinovich, et al., 1978
S°liquid 203.90 J/mol×K NISTLebedev and Lityagov, 1977
Tboil [330.15; 340.20] K Show Hide
Tboil 339.12 K Vapour liquid equilibrium of cyclic ethers with 1-chlorohexane: Experimental results and UNIFAC predictions
Tboil 339.12 K Study of isobaric vapour liquid equilibrium of some cyclic ethers with 1-chloropropane: Experimental results and SAFT-VR modelling
Tboil 338.65 K Measurement and correlation of isobaric vapor-liquid equilibria of methanol + tetrahydrofuran + 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide at 101.3 kPa
Tboil 339.12 K Isobaric Vapor-Liquid Equilibrium for Binary System of Tetrahydrofuran + 1,4-Butanediol and gamma-Butyrolactone at 50.0 and 70.0 kPa
Tboil 339.15 K Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Tboil 339.20 K Experimental Isobaric Vapor-Liquid Equilibrium Data for Binary Mixtures of Cyclic Ethers with (1-Methylethyl)benzene
Tboil 339.12 K ChemSep v8.3 pure component data Compiled value
Tboil 339.12 K NCMS SOLV-DB
Tboil 338.90 K NISTLebedev and Lityagov, 1977
Tboil 339.15 ± 0.10 K NISTWisniak, Fishman, et al., 1998
Tboil 339.05 ± 0.30 K NISTKrishnaiah and Surendranath, 1996
Tboil 339.20 ± 0.50 K NISTVasil'eva, Naumova, et al., 1990
Tboil 340.20 K NISTWeast and Grasselli, 1989
Tboil 339.10 K NISTMajer and Svoboda, 1985
Tboil 338.90 ± 0.15 K NISTSada, Morisue, et al., 1975
Tboil 339.35 ± 0.50 K NISTBissell and Finger, 1959
Tboil 337.90 ± 0.50 K NISTHolland and Smyth, 1955
Tboil 339.00 ± 2.00 K NISTChu and Yu, 1954
Tboil 340.00 ± 2.00 K NISTKatuno, 1948
Tboil 339.10 ± 0.20 K NISTBoord, Greenlee, et al., 1946
Tboil 339.65 ± 0.30 K NISTDolliver, Gresham, et al., 1938
Tboil 337.65 ± 2.00 K NISTHurd and Isenhour, 1932
Tboil 337.65 ± 2.00 K NISTHamonet, 1918
Tboil Outlier 330.15 ± 2.00 K NIST Dem'yanov, 1892
Data excluded from overall average
Tboil 340.15 ± 2.00 K NISTDekkers, 1890
Tc [540.10; 541.00] K Show Hide
Tc 540.50 K IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 7 Compiled value
Tc 540.20 K PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Tc 540.20 K ChemSep v8.3 pure component data Compiled value
Tc 540.20 K NISTMajer and Svoboda, 1985
Tc 540.10 ± 0.30 K NIST Cheng, McCoubrey, et al., 1962
Visual (5-cm 2-mm bore tubes) in nitrate-nitrite bath, TE or TH cal. vs NPL thermometer.
Tc Outlier 541.00 ± 1.50 K NISTKobe, Ravicz, et al., 1956
Tfus [164.05; 165.15] K Show Hide
Tfus 165.15 K Jean-Claude Bradley Open Melting Point Dataset (2014, CC0) Compiled value
Tfus 164.65 K ChemSep v8.3 pure component data Compiled value
Tfus 164.76 K NCMS SOLV-DB
Tfus 165.10 ± 0.50 K NISTHayduk, Laudie, et al., 1973
Tfus 164.15 ± 1.00 K NISTBrooks and Pilcher, 1959
Tfus 164.63 ± 0.20 K NISTBoord, Greenlee, et al., 1946
Tfus 164.05 ± 0.40 K NISTDolliver, Gresham, et al., 1938
Ttriple [164.65; 164.76] K Show Hide
Ttriple 164.65 K ChemSep v8.3 pure component data Compiled value
Ttriple 164.76 ± 0.05 K NISTWilhoit, Chao, et al., 1985
Ttriple 164.76 ± 0.02 K NISTLebedev, Lityagov, et al., 1979
Ttriple 164.76 ± 0.02 K NISTLebedev, Rabinovich, et al., 1978, 2
Ttriple 164.76 ± 0.02 K NISTLebedev, Rabinovich, et al., 1978
UQi 2.40 ChemSep v8.3 pure component data Compiled value
URi 2.94 ChemSep v8.3 pure component data Compiled value
Vc [0.224; 0.225] m3/kmol Show Hide
Vc 0.224 m3/kmol IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 7 Compiled value
Vc 0.224 m3/kmol PSRK revision IV (2005), critical constants and acentric factors of 1000 components Compiled value
Vc 0.224 m3/kmol ChemSep v8.3 pure component data Compiled value
Vc 0.225 ± 0.003 m3/kmol NISTKobe, Ravicz, et al., 1956
Vm [8.17e-05; 8.17e-05] m3/mol Show Hide
Vm 8.17e-05 m3/mol Excess Gibbs energies and volumes of the ternary system chloroform + tetrahydrofuran + cyclohexane at 298.15 K
Standard Ambient Temperature and Pressure (SATP)
Vm 8.17e-05 m3/mol Excess Gibbs Energies of the Ternary System 2-Methoxyethanol + Tetrahydrofuran + Cyclohexane and Other Relevant Binaries at 298.15 K
Standard Ambient Temperature and Pressure (SATP)
Zc [0.2590000; 0.2590000]   Show Hide
Zc 0.2590000 IUPAC Vapor-Liquid Critical Properties of Elements and Compounds, part 7 Compiled value
Zc 0.2590000 ChemSep v8.3 pure component data Compiled value
Zra 0.26 ChemSep v8.3 pure component data Compiled value

Temperature Dependent Properties

Property Value Unit Temperature (K) Source
αp [0.00; 0.00] 1/K [278.15; 318.15] Show Hide
αp 0.00 1/K 278.15 Phenomenon of "negative partial molar expansibility" of water in tetrahydrofuran: How plausible is it? Discussion on the paper "Volumetric properties on the (tetrahydrofuran + water) and (tetra-n-butylammonium bromide + water) systems: Experimental measurements and correlations" by Veronica Belandria, Ammir H. Mohammadi and Dominique Richon [J. Chem. Thermodyn. 41 (2009) 1382 1386]
αp 0.00 1/K 288.15 Phenomenon of "negative partial molar expansibility" of water in tetrahydrofuran: How plausible is it? Discussion on the paper "Volumetric properties on the (tetrahydrofuran + water) and (tetra-n-butylammonium bromide + water) systems: Experimental measurements and correlations" by Veronica Belandria, Ammir H. Mohammadi and Dominique Richon [J. Chem. Thermodyn. 41 (2009) 1382 1386]
αp 0.00 1/K 298.15 Phenomenon of "negative partial molar expansibility" of water in tetrahydrofuran: How plausible is it? Discussion on the paper "Volumetric properties on the (tetrahydrofuran + water) and (tetra-n-butylammonium bromide + water) systems: Experimental measurements and correlations" by Veronica Belandria, Ammir H. Mohammadi and Dominique Richon [J. Chem. Thermodyn. 41 (2009) 1382 1386]
αp 0.00 1/K 308.15 Phenomenon of "negative partial molar expansibility" of water in tetrahydrofuran: How plausible is it? Discussion on the paper "Volumetric properties on the (tetrahydrofuran + water) and (tetra-n-butylammonium bromide + water) systems: Experimental measurements and correlations" by Veronica Belandria, Ammir H. Mohammadi and Dominique Richon [J. Chem. Thermodyn. 41 (2009) 1382 1386]
αp 0.00 1/K 318.15 Phenomenon of "negative partial molar expansibility" of water in tetrahydrofuran: How plausible is it? Discussion on the paper "Volumetric properties on the (tetrahydrofuran + water) and (tetra-n-butylammonium bromide + water) systems: Experimental measurements and correlations" by Veronica Belandria, Ammir H. Mohammadi and Dominique Richon [J. Chem. Thermodyn. 41 (2009) 1382 1386]
Cp,gas [85.13; 133.68] J/mol×K [328.15; 500.15] Show Hide
Cp,gas 85.13 ± 0.17 J/mol×K 328.15 NISTHossenlopp I.A., 1981
Cp,gas 91.36 ± 0.18 J/mol×K 349.15 NIST
Cp,gas 106.12 ± 0.21 J/mol×K 399.15 NIST
Cp,gas 120.39 ± 0.24 J/mol×K 449.15 NIST
Cp,gas 133.68 ± 0.27 J/mol×K 500.15 NIST
Cp,liquid [105.50; 136.60] J/mol×K [180.15; 325.15] Show Hide
Cp,liquid 105.50 J/mol×K 180.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 105.60 J/mol×K 185.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 105.80 J/mol×K 190.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 106.00 J/mol×K 195.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 106.30 J/mol×K 200.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 106.50 J/mol×K 205.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 106.70 J/mol×K 210.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 107.20 J/mol×K 215.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 107.60 J/mol×K 220.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 107.90 J/mol×K 225.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 108.50 J/mol×K 230.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 109.20 J/mol×K 235.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 109.80 J/mol×K 240.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 110.60 J/mol×K 245.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 111.50 J/mol×K 250.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 112.40 J/mol×K 255.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 113.40 J/mol×K 260.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 114.40 J/mol×K 265.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 115.50 J/mol×K 270.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 116.60 J/mol×K 275.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 117.90 J/mol×K 280.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 119.20 J/mol×K 285.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 121.10 J/mol×K 288.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
Cp,liquid 120.30 J/mol×K 290.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 123.80 J/mol×K 293.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
Cp,liquid 121.70 J/mol×K 295.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 120.50 J/mol×K 298.00 NISTConti, Gianni, et al., 1976
Cp,liquid 120.00 J/mol×K 298.15 NISTBonner and Cerutti, 1976
Cp,liquid 123.90 J/mol×K 298.15 NIST Lebedev and Lityagov, 1977
T = 5 to 400 K.
Cp,liquid 123.90 J/mol×K 298.15 NIST Lebedev, Rabinovich, et al., 1978
T = 8 to 322 K.
Cp,liquid 124.10 J/mol×K 298.15 NIST Costas and Patterson, 1985
T = 283.15, 298.15, 313.15 K.
Cp,liquid 126.40 J/mol×K 298.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
Cp,liquid 123.56 J/mol×K 298.15 NISTKiyohara, D'Arcy, et al., 1979
Cp,liquid 122.92 J/mol×K 298.15 NISTInglese, Castagnolo, et al., 1981
Cp,liquid 124.10 J/mol×K 298.15 NISTCostas and Patterson, 1985, 2
Cp,liquid 123.10 J/mol×K 300.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 128.50 J/mol×K 303.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
Cp,liquid 124.50 J/mol×K 305.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 131.40 J/mol×K 308.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
Cp,liquid 126.00 J/mol×K 310.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 133.20 J/mol×K 313.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
Cp,liquid 127.30 J/mol×K 315.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 135.20 J/mol×K 318.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
Cp,liquid 128.80 J/mol×K 320.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
Cp,liquid 136.60 J/mol×K 323.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
Cp,liquid 130.50 J/mol×K 325.15 Measurement of heat capacities of ionic liquids by differential scanning calorimetry
η [0.0003636; 0.0005438] Pa×s [283.15; 323.15] Show Hide
η 0.0005438 Pa×s 283.15 Excess Enthalpy, Excess Volume, Viscosity Deviation, and Speed of Sound Deviation for the Mixture Tetrahydrofuran + 2,2,2-Trifluoroethanol at (283.15, 298.15, and 313.15) K
η 0.0005200 Pa×s 288.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
η 0.0005080 Pa×s 288.15 Viscosity Behavior of Some Oxygen Containing Compounds
η 0.0004991 Pa×s 288.15 Excess molar volume, viscosity, and refractive index study for the ternary mixture {2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3)} at different temperatures. Application of the ERAS-model and Peng Robinson Stryjek Vera equation of state
η 0.0005252 Pa×s 288.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
η 0.0004900 Pa×s 293.00 Ultrasonic velocity, viscosity and excess properties of binary mixture of tetrahydrofuran with 1-propanol and 2-propanol
η 0.0004700 Pa×s 293.00 Ultrasonic velocity, viscosity and excess properties of binary mixture of tetrahydrofuran with 1-propanol and 2-propanol
η 0.0005048 Pa×s 293.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
η 0.0004631 Pa×s 298.15 Densities and Viscosities of the Binary Mixtures of Tetrahydrofuran with Isomeric Chlorobutanes at 298.15 K and 313.15 K
η 0.0004500 Pa×s 298.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
η 0.0004580 Pa×s 298.15 Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures
η 0.0004700 Pa×s 298.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
η 0.0004847 Pa×s 298.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
η 0.0004631 Pa×s 298.15 Studies on Thermodynamic and Transport Properties of Binary Mixtures of Acetonitrile with Some Cyclic Ethers at Different Temperatures by Volumetric, Viscometric, and Interferometric Techniques
η 0.0004630 Pa×s 298.15 Densities, Viscosities, and Sound Speeds of Some Acetate Salts in Binary Mixtures of Tetrahydrofuran and Methanol at (303.15, 313.15, and 323.15) K
η 0.0004850 Pa×s 298.15 Density, Viscosity, Refractive Index, and Speed of Sound in the Binary Mixtures of Tri-n-butylamine + Triethylamine, + Tetrahydrofuran, + Tetradecane, + Tetrachloroethylene, + Pyridine, or + Trichloroethylene at (298.15, 303.15, and 308.15) K
η 0.0004645 Pa×s 298.15 Excess Enthalpy, Excess Volume, Viscosity Deviation, and Speed of Sound Deviation for the Mixture Tetrahydrofuran + 2,2,2-Trifluoroethanol at (283.15, 298.15, and 313.15) K
η 0.0004600 Pa×s 298.15 NCMS SOLV-DB
η 0.0004540 Pa×s 298.15 Excess molar volume, viscosity, and refractive index study for the ternary mixture {2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3)} at different temperatures. Application of the ERAS-model and Peng Robinson Stryjek Vera equation of state
η 0.0004620 Pa×s 298.15 Viscosity Behavior of Some Oxygen Containing Compounds
η 0.0004200 Pa×s 303.00 Ultrasonic velocity, viscosity and excess properties of binary mixture of tetrahydrofuran with 1-propanol and 2-propanol
η 0.0004600 Pa×s 303.15 Density, Viscosity, Refractive Index, and Speed of Sound in the Binary Mixtures of Tri-n-butylamine + Triethylamine, + Tetrahydrofuran, + Tetradecane, + Tetrachloroethylene, + Pyridine, or + Trichloroethylene at (298.15, 303.15, and 308.15) K
η 0.0004630 Pa×s 303.15 Thermodynamic Properties of Water + Tetrahydrofuran and Water + 1,4-Dioxane Mixtures at (303.15, 313.15, and 323.15) K
η 0.0004390 Pa×s 303.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
η 0.0004640 Pa×s 303.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
η 0.0004290 Pa×s 308.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
η 0.0004390 Pa×s 308.15 Density, Viscosity, Refractive Index, and Speed of Sound in the Binary Mixtures of Tri-n-butylamine + Triethylamine, + Tetrahydrofuran, + Tetradecane, + Tetrachloroethylene, + Pyridine, or + Trichloroethylene at (298.15, 303.15, and 308.15) K
η 0.0004260 Pa×s 308.15 Viscosity Behavior of Some Oxygen Containing Compounds
η 0.0004330 Pa×s 308.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
η 0.0004172 Pa×s 308.15 Excess molar volume, viscosity, and refractive index study for the ternary mixture {2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3)} at different temperatures. Application of the ERAS-model and Peng Robinson Stryjek Vera equation of state
η 0.0004125 Pa×s 308.15 Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures
η 0.0004276 Pa×s 308.15 Studies on Thermodynamic and Transport Properties of Binary Mixtures of Acetonitrile with Some Cyclic Ethers at Different Temperatures by Volumetric, Viscometric, and Interferometric Techniques
η 0.0004433 Pa×s 308.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
η 0.0004277 Pa×s 308.15 Densities, Viscosities, and Sound Speeds of Some Acetate Salts in Binary Mixtures of Tetrahydrofuran and Methanol at (303.15, 313.15, and 323.15) K
η 0.0003900 Pa×s 313.00 Ultrasonic velocity, viscosity and excess properties of binary mixture of tetrahydrofuran with 1-propanol and 2-propanol
η 0.0003979 Pa×s 313.15 Densities and Viscosities of the Binary Mixtures of Tetrahydrofuran with Isomeric Chlorobutanes at 298.15 K and 313.15 K
η 0.0004227 Pa×s 313.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
η 0.0003992 Pa×s 313.15 Excess Enthalpy, Excess Volume, Viscosity Deviation, and Speed of Sound Deviation for the Mixture Tetrahydrofuran + 2,2,2-Trifluoroethanol at (283.15, 298.15, and 313.15) K
η 0.0004040 Pa×s 313.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
η 0.0004000 Pa×s 313.15 Thermodynamic Properties of Water + Tetrahydrofuran and Water + 1,4-Dioxane Mixtures at (303.15, 313.15, and 323.15) K
η 0.0004005 Pa×s 318.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
η 0.0003762 Pa×s 318.15 Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures
η 0.0003903 Pa×s 318.15 Studies on Thermodynamic and Transport Properties of Binary Mixtures of Acetonitrile with Some Cyclic Ethers at Different Temperatures by Volumetric, Viscometric, and Interferometric Techniques
η 0.0003902 Pa×s 318.15 Densities, Viscosities, and Sound Speeds of Some Acetate Salts in Binary Mixtures of Tetrahydrofuran and Methanol at (303.15, 313.15, and 323.15) K
η 0.0003636 Pa×s 323.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
η 0.0003720 Pa×s 323.15 Thermodynamic Properties of Water + Tetrahydrofuran and Water + 1,4-Dioxane Mixtures at (303.15, 313.15, and 323.15) K
ΔfusH [8.54; 8.54] kJ/mol [164.76; 164.80] Show Hide
ΔfusH 8.54 kJ/mol 164.76 NISTLebedev, Rabinovich, et al., 1978
ΔfusH 8.54 kJ/mol 164.76 NISTLebedev and Lityagov, 1977
ΔfusH 8.54 kJ/mol 164.76 NISTLebedev, Rabinovich, et al., 1978, 2
ΔfusH 8.54 kJ/mol 164.80 NISTAcree, 1991
ΔfusH 8.54 kJ/mol 164.80 NISTAcree, 1991, 2
ΔvapH [29.00; 33.10] kJ/mol [287.50; 504.00] Show Hide
ΔvapH 32.50 ± 0.20 kJ/mol 287.50 NISTBorisov and Chugunova, 1976
ΔvapH 32.80 kJ/mol 290.50 NIST Koizumi and Ouchi, 1970
See also Boublik, Fried, et al., 1984.
ΔvapH 33.00 kJ/mol 293.00 NIST Skuratov, Strepikheev, et al., 1957
Combustion at 293 K
ΔvapH 31.80 kJ/mol 303.00 NIST Klages and Möhler, 1948
See also Cass, Fletcher, et al., 1958, 2.
ΔvapH 33.10 kJ/mol 306.00 NISTStephenson and Malanowski, 1987
ΔvapH 32.30 kJ/mol 314.50 NISTLoras, Aucejo, et al., 2001
ΔvapH 30.80 kJ/mol 320.50 NISTRivenq, 1975
ΔvapH 31.90 kJ/mol 334.50 NIST Scott D.W., 1970
See also Boublik, Fried, et al., 1984.
ΔvapH 29.81 kJ/mol 339.10 NISTMajer and Svoboda, 1985
ΔvapH 29.00 kJ/mol 439.00 NISTStephenson and Malanowski, 1987
ΔvapH 29.60 kJ/mol 504.00 NISTStephenson and Malanowski, 1987
ν [0.0000005; 0.0000006] m2/s [283.15; 313.15] Show Hide
ν 0.0000006 m2/s 283.15 Experimental and predicted viscosities of binary mixtures of cyclic ethers with 1-chloropentane or 1-chlorohexane at 283.15, 298.15, and 313.15K
ν 0.0000005 m2/s 298.15 Experimental and predicted viscosities of binary mixtures of cyclic ethers with 1-chloropentane or 1-chlorohexane at 283.15, 298.15, and 313.15K
ν 0.0000005 m2/s 313.15 Experimental and predicted viscosities of binary mixtures of cyclic ethers with 1-chloropentane or 1-chlorohexane at 283.15, 298.15, and 313.15K
Pvap [6.59; 101.33] kPa [273.60; 339.15] Show Hide
Pvap 6.59 kPa 273.60 Vapor Pressure and Its Temperature Dependence of 28 Organic Compounds: Cyclic Amines, Cyclic Ethers, and Cyclic and Open Chain Secondary Alcohols
Pvap 7.10 kPa 275.99 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 7.56 kPa 276.53 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 7.84 kPa 277.76 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 8.33 kPa 278.19 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 8.38 kPa 278.30 Vapor Pressure and Its Temperature Dependence of 28 Organic Compounds: Cyclic Amines, Cyclic Ethers, and Cyclic and Open Chain Secondary Alcohols
Pvap 8.61 kPa 279.41 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 9.04 kPa 279.86 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 8.93 kPa 280.16 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 9.96 kPa 281.95 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 10.55 kPa 283.07 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 10.73 kPa 283.15 Isothermal (vapour + liquid) equilibrium for binary mixtures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane or tetrachloroethene) at nine temperatures
Pvap 10.32 kPa 283.15 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 10.90 kPa 283.36 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 11.00 kPa 283.70 Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap 11.68 kPa 284.88 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 11.81 kPa 285.02 Vapor Pressure and Its Temperature Dependence of 28 Organic Compounds: Cyclic Amines, Cyclic Ethers, and Cyclic and Open Chain Secondary Alcohols
Pvap 12.44 kPa 286.55 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 13.02 kPa 286.97 Vapor Pressure and Its Temperature Dependence of 28 Organic Compounds: Cyclic Amines, Cyclic Ethers, and Cyclic and Open Chain Secondary Alcohols
Pvap 13.67 kPa 288.15 Isothermal (vapour + liquid) equilibrium for binary mixtures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane or tetrachloroethene) at nine temperatures
Pvap 13.79 kPa 288.50 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 14.00 kPa 289.00 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 14.48 kPa 289.66 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 14.89 kPa 289.75 Vapor Pressure and Its Temperature Dependence of 28 Organic Compounds: Cyclic Amines, Cyclic Ethers, and Cyclic and Open Chain Secondary Alcohols
Pvap 14.68 kPa 290.03 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 15.65 kPa 291.04 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 16.65 kPa 292.31 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 16.28 kPa 292.45 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 17.00 kPa 292.65 Vapor Pressure and Its Temperature Dependence of 28 Organic Compounds: Cyclic Amines, Cyclic Ethers, and Cyclic and Open Chain Secondary Alcohols
Pvap 17.25 kPa 293.15 Isothermal (vapour + liquid) equilibrium for binary mixtures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane or tetrachloroethene) at nine temperatures
Pvap 17.43 kPa 293.30 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 17.40 kPa 293.50 Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap 18.84 kPa 294.92 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 19.72 kPa 296.05 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 20.37 kPa 296.84 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 20.65 kPa 297.09 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 20.89 kPa 297.35 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 21.27 kPa 297.57 Vapor Pressure and Its Temperature Dependence of 28 Organic Compounds: Cyclic Amines, Cyclic Ethers, and Cyclic and Open Chain Secondary Alcohols
Pvap 21.60 kPa 298.15 Isothermal (vapour + liquid) equilibrium for binary mixtures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane or tetrachloroethene) at nine temperatures
Pvap 21.61 kPa 298.15 Isothermal (vapour + liquid) equilibrium of (cyclic ethers + chlorohexane) mixtures: Experimental results and SAFT modelling
Pvap 21.61 kPa 298.15 Isothermal vapour-liquid equilibrium for cyclic ethers with 1-chloropentane
Pvap 21.60 kPa 298.15 NCMS SOLV-DB
Pvap 21.50 kPa 298.15 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 22.24 kPa 298.72 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 23.05 kPa 299.83 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 23.84 kPa 300.57 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 25.28 kPa 301.73 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 25.92 kPa 302.25 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 26.67 kPa 302.75 Vapor Pressure and Its Temperature Dependence of 28 Organic Compounds: Cyclic Amines, Cyclic Ethers, and Cyclic and Open Chain Secondary Alcohols
Pvap 26.62 kPa 302.96 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 26.67 kPa 303.04 Double Azeotropy in Binary Mixtures 1,1,1,2,3,4,4,5,5,5-Decafluoropentane High-Boiling Diastereomer + Tetrahydrofuran
Pvap 26.68 kPa 303.05 Double Azeotropy in Binary Mixtures 1,1,1,2,3,4,4,5,5,5-Decafluoropentane High-Boiling Diastereomer + Tetrahydrofuran
Pvap 26.60 kPa 303.10 Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap 26.81 kPa 303.15 Isothermal (vapour + liquid) equilibrium for binary mixtures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane or tetrachloroethene) at nine temperatures
Pvap 26.87 kPa 303.23 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 27.79 kPa 304.04 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 28.41 kPa 304.72 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 29.09 kPa 305.11 Double Azeotropy in Binary Mixtures 1,1,1,2,3,4,4,5,5,5-Decafluoropentane High-Boiling Diastereomer + Tetrahydrofuran
Pvap 29.43 kPa 305.35 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 30.77 kPa 306.54 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 31.35 kPa 307.15 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 32.88 kPa 307.83 Vapor Pressure and Its Temperature Dependence of 28 Organic Compounds: Cyclic Amines, Cyclic Ethers, and Cyclic and Open Chain Secondary Alcohols
Pvap 32.49 kPa 308.07 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 32.94 kPa 308.15 Isothermal (vapour + liquid) equilibrium for binary mixtures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane or tetrachloroethene) at nine temperatures
Pvap 34.50 kPa 309.28 Double Azeotropy in Binary Mixtures 1,1,1,2,3,4,4,5,5,5-Decafluoropentane High-Boiling Diastereomer + Tetrahydrofuran
Pvap 34.95 kPa 309.62 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 35.55 kPa 310.20 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 36.65 kPa 310.86 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 38.54 kPa 311.90 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 38.73 kPa 312.05 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 40.15 kPa 313.11 Double Azeotropy in Binary Mixtures 1,1,1,2,3,4,4,5,5,5-Decafluoropentane High-Boiling Diastereomer + Tetrahydrofuran
Pvap 40.13 kPa 313.12 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 40.62 kPa 313.15 Isothermal vapour-liquid equilibrium for cyclic ethers with 1-chloropentane
Pvap 40.21 kPa 313.15 Isothermal (vapour + liquid) equilibrium for binary mixtures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane or tetrachloroethene) at nine temperatures
Pvap 40.09 kPa 313.18 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 40.10 kPa 313.20 Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap 42.19 kPa 314.57 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 44.65 kPa 315.86 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 45.51 kPa 316.36 Double Azeotropy in Binary Mixtures 1,1,1,2,3,4,4,5,5,5-Decafluoropentane High-Boiling Diastereomer + Tetrahydrofuran
Pvap 46.56 kPa 316.95 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 47.86 kPa 317.71 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 48.62 kPa 318.10 Double Azeotropy in Binary Mixtures 1,1,1,2,3,4,4,5,5,5-Decafluoropentane High-Boiling Diastereomer + Tetrahydrofuran
Pvap 48.68 kPa 318.15 Isothermal (vapour + liquid) equilibrium for binary mixtures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane or tetrachloroethene) at nine temperatures
Pvap 50.00 kPa 318.85 Isobaric Vapor-Liquid Equilibrium for Binary System of Tetrahydrofuran + 1,4-Butanediol and gamma-Butyrolactone at 50.0 and 70.0 kPa
Pvap 50.86 kPa 319.43 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 51.31 kPa 319.58 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 55.34 kPa 321.57 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 55.60 kPa 321.85 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 58.00 kPa 323.00 Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap 58.54 kPa 323.15 Isothermal (vapour + liquid) equilibrium for binary mixtures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane or tetrachloroethene) at nine temperatures
Pvap 59.46 kPa 323.59 Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran
Pvap 61.11 kPa 324.31 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 66.49 kPa 326.75 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 70.00 kPa 328.15 Isobaric Vapor-Liquid Equilibrium for Binary System of Tetrahydrofuran + 1,4-Butanediol and gamma-Butyrolactone at 50.0 and 70.0 kPa
Pvap 70.61 kPa 328.15 Isothermal vapour-liquid equilibrium for cyclic ethers with 1-chloropentane
Pvap 70.61 kPa 328.15 Isothermal (vapour + liquid) equilibrium of (cyclic ethers + chlorohexane) mixtures: Experimental results and SAFT modelling
Pvap 72.47 kPa 329.21 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 78.78 kPa 331.65 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 81.90 kPa 332.80 Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
Pvap 85.92 kPa 334.15 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 93.33 kPa 336.55 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 94.60 kPa 337.15 Bubble-Temperature Measurements on Some Binary Mixtures Formed by Tetrahydrofuran or Amyl Alcohol with Hydrocarbons, Chlorohydrocarbons, or Butanols at (94.6 or 95.8) kPa
Pvap 95.80 kPa 337.55 Bubble temperature measurements on the binary mixtures formed by decane with a variety of compounds at 95.8 kPa
Pvap 95.80 kPa 337.55 Bubble-Temperature Measurements on Some Binary Mixtures Formed by Tetrahydrofuran or Amyl Alcohol with Hydrocarbons, Chlorohydrocarbons, or Butanols at (94.6 or 95.8) kPa
Pvap 101.30 kPa 338.65 Measurement and correlation of isobaric vapor-liquid equilibria of methanol + tetrahydrofuran + 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide at 101.3 kPa
Pvap 100.72 kPa 339.06 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
Pvap 101.33 kPa 339.12 Vapour liquid equilibrium of cyclic ethers with 1-chlorohexane: Experimental results and UNIFAC predictions
Pvap 101.30 kPa 339.15 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
n0 [1.39083; 1.41005]   [288.15; 323.15] Show Hide
n0 1.40940 288.15 Refractive Indices of Binary Mixtures of Tetrahydrofuran with Aromatic Hydrocarbon at Temperatures from (288.15 to 318.15) K
n0 1.40875 288.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
n0 1.40860 288.15 Excess molar volume, viscosity, and refractive index study for the ternary mixture {2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3)} at different temperatures. Application of the ERAS-model and Peng Robinson Stryjek Vera equation of state
n0 1.41005 288.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
n0 1.40700 293.15 Refractive Indices of Binary Mixtures of Tetrahydrofuran with Aromatic Hydrocarbon at Temperatures from (288.15 to 318.15) K
n0 1.40737 293.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
n0 1.40720 293.15 Bubble-Temperature Measurements on Some Binary Mixtures Formed by Tetrahydrofuran or Amyl Alcohol with Hydrocarbons, Chlorohydrocarbons, or Butanols at (94.6 or 95.8) kPa
at 1 kPa
n0 1.40696 293.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
n0 1.40500 293.15 Solubilities of Phosphorus-Containing Compounds in Selected Solvents
at 1 kPa
n0 1.40696 293.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
n0 1.40500 298.00 Densities, ultrasonic speeds and refractive indices of phenetole with N-methyl-2-pyrrolidone, N,N-dimethylformamide and tetrahydrofuran binary mixtures at different temperatures
n0 1.40490 298.15 Density, Viscosity, Refractive Index, and Speed of Sound in the Binary Mixtures of Tri-n-butylamine + Triethylamine, + Tetrahydrofuran, + Tetradecane, + Tetrachloroethylene, + Pyridine, or + Trichloroethylene at (298.15, 303.15, and 308.15) K
n0 1.40443 298.15 Experimental Isobaric Vapor-Liquid Equilibrium Data for Binary Mixtures of Cyclic Ethers with (1-Methylethyl)benzene
at 1 kPa
n0 1.40460 298.15 Refractive Indices of Binary Mixtures of Tetrahydrofuran with Aromatic Hydrocarbon at Temperatures from (288.15 to 318.15) K
n0 1.41000 298.15 NCMS SOLV-DB
n0 1.40500 298.15 Viscosity, Density, Speed of Sound, and Refractive Index of Binary Mixtures of Organic Solvent + Ionic Liquid, 1-Butyl-3-methylimidazolium Hexafluorophosphate at 298.15 K
at 1 kPa
n0 1.40520 298.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
at 1 kPa
n0 1.40610 298.15 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
at 1 kPa
n0 1.40487 298.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
n0 1.40480 298.15 To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure
at 1 kPa
n0 1.40370 298.15 Excess molar volume, viscosity, and refractive index study for the ternary mixture {2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3)} at different temperatures. Application of the ERAS-model and Peng Robinson Stryjek Vera equation of state
n0 1.40420 298.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
n0 1.40470 298.15 Solubilities of Bis (2,2,6,6-Tetramethyl-4-Piperidinyl) Maleate in Hexane, Heptane, Octane, m-Xylene and Tetrahydrofuran from (253.15 to 310.15) K
at 1 kPa
n0 1.40420 298.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
n0 1.40720 298.15 Bubble temperature measurements on the binary mixtures formed by decane with a variety of compounds at 95.8 kPa
at 1 kPa
n0 1.40480 298.15 Water as a solute in aprotic dipolar solvents. 1. D2O-H2O solute isotope effects on the enthalpy of water dissolution in acetone, tetrahydrofuran and 1,4-dioxane at 298.15 K
at 1 kPa
n0 1.40480 298.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
n0 1.40472 298.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
n0 1.40300 303.00 Densities, ultrasonic speeds and refractive indices of phenetole with N-methyl-2-pyrrolidone, N,N-dimethylformamide and tetrahydrofuran binary mixtures at different temperatures
n0 1.40480 303.15 Thermodynamic Properties of Water + Tetrahydrofuran and Water + 1,4-Dioxane Mixtures at (303.15, 313.15, and 323.15) K
at 1 kPa
n0 1.40280 303.15 Densities, speeds of sound, isentropic compressibilities, refractive indexes, and viscosities of tetrahydrofuran with haloalkane or alkyl ethanoate at T = 303.15 K
at 1 kPa
n0 1.40203 303.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
n0 1.40230 303.15 Refractive Indices of Binary Mixtures of Tetrahydrofuran with Aromatic Hydrocarbon at Temperatures from (288.15 to 318.15) K
n0 1.40157 303.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
n0 1.40157 303.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
n0 1.40260 303.15 Density, Viscosity, Refractive Index, and Speed of Sound in the Binary Mixtures of Tri-n-butylamine + Triethylamine, + Tetrahydrofuran, + Tetradecane, + Tetrachloroethylene, + Pyridine, or + Trichloroethylene at (298.15, 303.15, and 308.15) K
n0 1.40000 308.00 Densities, ultrasonic speeds and refractive indices of phenetole with N-methyl-2-pyrrolidone, N,N-dimethylformamide and tetrahydrofuran binary mixtures at different temperatures
n0 1.39885 308.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
n0 1.39931 308.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
n0 1.39953 308.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
n0 1.39885 308.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
n0 1.39870 308.15 Excess molar volume, viscosity, and refractive index study for the ternary mixture {2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3)} at different temperatures. Application of the ERAS-model and Peng Robinson Stryjek Vera equation of state
n0 1.39980 308.15 Density, Viscosity, Refractive Index, and Speed of Sound in the Binary Mixtures of Tri-n-butylamine + Triethylamine, + Tetrahydrofuran, + Tetradecane, + Tetrachloroethylene, + Pyridine, or + Trichloroethylene at (298.15, 303.15, and 308.15) K
n0 1.40020 308.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
n0 1.39990 308.15 Refractive Indices of Binary Mixtures of Tetrahydrofuran with Aromatic Hydrocarbon at Temperatures from (288.15 to 318.15) K
n0 1.39750 313.15 Refractive Indices of Binary Mixtures of Tetrahydrofuran with Aromatic Hydrocarbon at Temperatures from (288.15 to 318.15) K
n0 1.39623 313.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
n0 1.39623 313.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
n0 1.39659 313.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
n0 1.39510 318.15 Refractive Indices of Binary Mixtures of Tetrahydrofuran with Aromatic Hydrocarbon at Temperatures from (288.15 to 318.15) K
n0 1.39380 318.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
n0 1.39349 318.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
n0 1.39349 318.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
n0 1.39098 323.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
n0 1.39083 323.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
n0 1.39083 323.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
ρl [848.68; 985.00] kg/m3 [278.15; 328.15] Show Hide
ρl 903.71 kg/m3 278.15 Ultrasonic and Volumetric Properties of 1-Ethyl-3-methylimidazolium Trifluoromethanesulfonate Ionic Liquid with 2-Propanol or Tetrahydrofuran at Several Temperatures
ρl 903.71 kg/m3 278.15 Phenomenon of "negative partial molar expansibility" of water in tetrahydrofuran: How plausible is it? Discussion on the paper "Volumetric properties on the (tetrahydrofuran + water) and (tetra-n-butylammonium bromide + water) systems: Experimental measurements and correlations" by Veronica Belandria, Ammir H. Mohammadi and Dominique Richon [J. Chem. Thermodyn. 41 (2009) 1382 1386]
ρl 903.68 kg/m3 278.15 To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure
ρl 898.31 kg/m3 283.15 To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure
ρl 897.98 kg/m3 283.15 Experimental and predicted viscosities of binary mixtures of cyclic ethers with 1-chloropentane or 1-chlorohexane at 283.15, 298.15, and 313.15K
ρl 898.62 kg/m3 283.15 Excess Enthalpy, Excess Volume, Viscosity Deviation, and Speed of Sound Deviation for the Mixture Tetrahydrofuran + 2,2,2-Trifluoroethanol at (283.15, 298.15, and 313.15) K
ρl 892.90 kg/m3 288.15 To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure
ρl 892.92 kg/m3 288.15 Excess molar volume, viscosity, and refractive index study for the ternary mixture {2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3)} at different temperatures. Application of the ERAS-model and Peng Robinson Stryjek Vera equation of state
ρl 892.86 kg/m3 288.15 Volumetric properties of binary mixtures of ethers and acetonitrile: Experimental results and application of the Prigogine Flory Patterson theory
ρl 892.92 kg/m3 288.15 Ultrasonic and Volumetric Properties of 1-Ethyl-3-methylimidazolium Trifluoromethanesulfonate Ionic Liquid with 2-Propanol or Tetrahydrofuran at Several Temperatures
ρl 893.29 kg/m3 288.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
ρl 893.02 kg/m3 288.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
ρl 892.94 kg/m3 288.15 Phenomenon of "negative partial molar expansibility" of water in tetrahydrofuran: How plausible is it? Discussion on the paper "Volumetric properties on the (tetrahydrofuran + water) and (tetra-n-butylammonium bromide + water) systems: Experimental measurements and correlations" by Veronica Belandria, Ammir H. Mohammadi and Dominique Richon [J. Chem. Thermodyn. 41 (2009) 1382 1386]
ρl 892.93 kg/m3 288.15 Viscosity Behavior of Some Oxygen Containing Compounds
ρl 887.47 kg/m3 293.15 To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure
ρl 888.77 kg/m3 293.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
ρl 985.00 kg/m3 293.15 Solubilities of Phosphorus-Containing Compounds in Selected Solvents
at 1 kPa
ρl 887.01 kg/m3 293.15 Temperature and concentration dependence of volumetric properties of (tetrahydrofuran + methyl acrylate, or + ethyl acrylate, or + n-butyl acrylate, or + tert-butyl acrylate) binary mixtures
ρl 887.52 kg/m3 293.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
ρl 887.52 kg/m3 293.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
ρl 888.69 kg/m3 293.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
ρl 888.73 kg/m3 293.15 Volumetric properties of binary mixtures of N-ethylformamide with tetrahydrofuran, 2-butanone and ethylacetate from (293.15 to 313.15) K
ρl 889.20 kg/m3 293.15 Bubble-Temperature Measurements on Some Binary Mixtures Formed by Tetrahydrofuran or Amyl Alcohol with Hydrocarbons, Chlorohydrocarbons, or Butanols at (94.6 or 95.8) kPa
at 1 kPa
ρl 887.87 kg/m3 293.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
ρl 887.41 kg/m3 293.15 Volumetric Properties of Binary Mixtures Containing Ionic Liquids and Some Aprotic Solvents
ρl 887.52 kg/m3 293.15 Volumetric properties of binary mixtures of ethers and acetonitrile: Experimental results and application of the Prigogine Flory Patterson theory
ρl 882.00 kg/m3 298.00 Densities, ultrasonic speeds and refractive indices of phenetole with N-methyl-2-pyrrolidone, N,N-dimethylformamide and tetrahydrofuran binary mixtures at different temperatures
ρl 882.10 kg/m3 298.15 Study of the Surface Tension of Chlorocyclohexane or Bromocyclohexane with Some Cyclic Ethers
at 1 kPa
ρl 882.00 kg/m3 298.15 To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure
ρl 881.95 kg/m3 298.15 Isothermal (vapour + liquid) equilibrium of (cyclic ethers + chlorohexane) mixtures: Experimental results and SAFT modelling
ρl 882.37 kg/m3 298.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
ρl 882.04 kg/m3 298.15 Volumetric properties of binary mixtures of ethers and acetonitrile: Experimental results and application of the Prigogine Flory Patterson theory
ρl 882.03 kg/m3 298.15 Excess molar volume, viscosity, and refractive index study for the ternary mixture {2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3)} at different temperatures. Application of the ERAS-model and Peng Robinson Stryjek Vera equation of state
ρl 882.00 kg/m3 298.15 Volumetric Properties of the Ionic Liquid, 1-Butyl-3-methylimidazolium Tetrafluoroborate, in Organic Solvents at T = 298.15 K
at 1 kPa
ρl 882.09 kg/m3 298.15 Excess molar enthalpies of the ternary mixtures (1-hexene + tetrahydrofuran or 2-methyltetrahydrofuran + methyl tert-butyl ether) at the temperature 298.15K.
at 1 kPa
ρl 882.00 kg/m3 298.15 Volumetric and compressibility behaviour of ionic liquid, 1-n-butyl-3-methylimidazolium hexafluorophosphate and tetrabutylammonium hexafluorophosphate in organic solvents at T = 298.15 K
at 1 kPa
ρl 882.04 kg/m3 298.15 Phenomenon of "negative partial molar expansibility" of water in tetrahydrofuran: How plausible is it? Discussion on the paper "Volumetric properties on the (tetrahydrofuran + water) and (tetra-n-butylammonium bromide + water) systems: Experimental measurements and correlations" by Veronica Belandria, Ammir H. Mohammadi and Dominique Richon [J. Chem. Thermodyn. 41 (2009) 1382 1386]
ρl 882.01 kg/m3 298.15 Viscosity, Density, Speed of Sound, and Refractive Index of Binary Mixtures of Organic Solvent + Ionic Liquid, 1-Butyl-3-methylimidazolium Hexafluorophosphate at 298.15 K
at 1 kPa
ρl 882.09 kg/m3 298.15 Excess Enthalpies of the Ternary Mixtures: Tetrahydrofuran + (Hexane or Cyclohexane) + Decane at 298.15K
at 1 kPa
ρl 882.13 kg/m3 298.15 A volumetric and viscosity study for the binary mixtures of 1-hexyl-3-methylimidazolium tetrafluoroborate with some molecular solvents
at 1 kPa
ρl 882.09 kg/m3 298.15 Excess molar enthalpies of the ternary mixtures: (tetrahydrofuran or 2-methyltetrahydrofuran + methyl tert-butyl ether + n-octane) at the temperature 298.15 K
at 1 kPa
ρl 883.24 kg/m3 298.15 Volumetric properties of binary mixtures of N-ethylformamide with tetrahydrofuran, 2-butanone and ethylacetate from (293.15 to 313.15) K
ρl 882.03 kg/m3 298.15 Water as a solute in aprotic dipolar solvents. 1. D2O-H2O solute isotope effects on the enthalpy of water dissolution in acetone, tetrahydrofuran and 1,4-dioxane at 298.15 K
at 1 kPa
ρl 882.06 kg/m3 298.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
ρl 881.96 kg/m3 298.15 Viscosity Behavior of Some Oxygen Containing Compounds
ρl 882.15 kg/m3 298.15 Densities, speeds of sound and viscosities of binary mixtures of tetrahydrofuran with 1-hexanol, 1-octanol and 1-decanol at T = (298.15 to 313.15) K
at 1 kPa
ρl 882.09 kg/m3 298.15 Excess molar enthalpies of the ternary mixtures: {tetrahydrofuran or 2-methyltetrahydrofuran + methyl tert-butyl ether + n-dodecane} at the temperature 298.15 K
at 1 kPa
ρl 882.21 kg/m3 298.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
ρl 882.40 kg/m3 298.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
ρl 882.90 kg/m3 298.15 Density, Viscosity, Refractive Index, and Speed of Sound in the Binary Mixtures of Tri-n-butylamine + Triethylamine, + Tetrahydrofuran, + Tetradecane, + Tetrachloroethylene, + Pyridine, or + Trichloroethylene at (298.15, 303.15, and 308.15) K
ρl 882.06 kg/m3 298.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
ρl 881.93 kg/m3 298.15 Experimental and predicted viscosities of binary mixtures of cyclic ethers with 1-chloropentane or 1-chlorohexane at 283.15, 298.15, and 313.15K
ρl 881.50 kg/m3 298.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
ρl 882.21 kg/m3 298.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
ρl 888.60 kg/m3 298.15 Vapor Liquid Equilibrium for Ternary and Binary Mixtures of Tetrahydrofuran, Cyclohexane, and 1,2-Propanediol at 101.3 kPa
at 1 kPa
ρl 882.02 kg/m3 298.15 Ultrasonic and Volumetric Properties of 1-Ethyl-3-methylimidazolium Trifluoromethanesulfonate Ionic Liquid with 2-Propanol or Tetrahydrofuran at Several Temperatures
ρl 882.01 kg/m3 298.15 Standard partial molar volumes of some electrolytes in ethylene carbonate based mixtures
at 1 kPa
ρl 882.00 kg/m3 298.15 Vapour liquid equilibrium of cyclic ethers with 1-chlorohexane: Experimental results and UNIFAC predictions
at 1 kPa
ρl 884.99 kg/m3 298.15 Quaternary isothermal vapor-liquid equilibrium of the model biofuel 2-butanone + n-heptane + tetrahydrofuran + cyclohexane using Raman spectroscopic characterization
at 1 kPa
ρl 889.20 kg/m3 298.15 Bubble temperature measurements on the binary mixtures formed by decane with a variety of compounds at 95.8 kPa
at 1 kPa
ρl 881.90 kg/m3 298.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
ρl 882.18 kg/m3 298.15 Excess Enthalpy, Excess Volume, Viscosity Deviation, and Speed of Sound Deviation for the Mixture Tetrahydrofuran + 2,2,2-Trifluoroethanol at (283.15, 298.15, and 313.15) K
ρl 881.95 kg/m3 298.15 Isothermal vapour-liquid equilibrium for cyclic ethers with 1-chloropentane
ρl 882.08 kg/m3 298.15 Excess Molar Enthalpies of Dipropyl Ether + Dibutyl Ether + (1-Hexene or Tetrahydrofuran) at 298.15 K
at 1 kPa
ρl 881.90 kg/m3 298.15 Solubilities of Bis (2,2,6,6-Tetramethyl-4-Piperidinyl) Maleate in Hexane, Heptane, Octane, m-Xylene and Tetrahydrofuran from (253.15 to 310.15) K
at 1 kPa
ρl 881.98 kg/m3 298.15 Volumetric Properties of Binary Mixtures Containing Ionic Liquids and Some Aprotic Solvents
ρl 883.30 kg/m3 298.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
ρl 882.06 kg/m3 298.15 Excess Molar volumes and Surface Tensions of Trimethylbenzene with Tetrahydrofuran Tetrachloromethane and Dimethylsulfoxide at 298.15 K
at 1 kPa
ρl 882.05 kg/m3 298.15 Temperature and concentration dependence of volumetric properties of (tetrahydrofuran + methyl acrylate, or + ethyl acrylate, or + n-butyl acrylate, or + tert-butyl acrylate) binary mixtures
ρl 880.80 kg/m3 298.15 Studies on Thermodynamic and Transport Properties of Binary Mixtures of Acetonitrile with Some Cyclic Ethers at Different Temperatures by Volumetric, Viscometric, and Interferometric Techniques
ρl 880.70 kg/m3 298.15 Densities, Viscosities, and Sound Speeds of Some Acetate Salts in Binary Mixtures of Tetrahydrofuran and Methanol at (303.15, 313.15, and 323.15) K
ρl 882.06 kg/m3 298.15 Compressibility Studies of Binary Solutions Involving Water as a Solute in Nonaqueous Solvents at T ) 298.15 K
at 1 kPa
ρl 881.95 kg/m3 298.15 Densities and Viscosities of the Binary Mixtures of Tetrahydrofuran with Isomeric Chlorobutanes at 298.15 K and 313.15 K
ρl 881.95 kg/m3 298.15 Surface Tension of Mixtures of Tetrahydrofuran or Tetrahydropyran with Isomeric Chlorobutanes
at 1 kPa
ρl 878.00 kg/m3 303.00 Densities, ultrasonic speeds and refractive indices of phenetole with N-methyl-2-pyrrolidone, N,N-dimethylformamide and tetrahydrofuran binary mixtures at different temperatures
ρl 876.47 kg/m3 303.13 Volumetric Properties of Binary Mixtures Containing Ionic Liquids and Some Aprotic Solvents
ρl 876.91 kg/m3 303.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
ρl 878.70 kg/m3 303.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
ρl 877.81 kg/m3 303.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
ρl 876.54 kg/m3 303.15 Volumetric properties of binary mixtures of ethers and acetonitrile: Experimental results and application of the Prigogine Flory Patterson theory
ρl 876.51 kg/m3 303.15 To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure
ρl 876.70 kg/m3 303.15 Densities, speeds of sound, isentropic compressibilities, refractive indexes, and viscosities of tetrahydrofuran with haloalkane or alkyl ethanoate at T = 303.15 K
at 1 kPa
ρl 876.90 kg/m3 303.15 Thermodynamic and acoustic properties of binary mixtures of ethers. IV. Diisopropyl ether or oxolane with N,N-dimethylaniline or N,Ndiethylaniline at 303.15, 313.15 and 323.15 K
ρl 876.50 kg/m3 303.15 Unravelling various types of non-covalent interactions of benzyl amine with ethers in n-hexane at 303.15 K by ultrasonic and DFT methods
at 1 kPa
ρl 876.90 kg/m3 303.15 Thermodynamic and acoustic properties of binary mixtures of ethers. V. Diisopropyl ether or oxolane with 2- or 3-chloroanilines at 303.15, 313.15 and 323.15 K
ρl 877.10 kg/m3 303.15 Temperature and concentration dependence of volumetric properties of (tetrahydrofuran + methyl acrylate, or + ethyl acrylate, or + n-butyl acrylate, or + tert-butyl acrylate) binary mixtures
ρl 876.60 kg/m3 303.15 Thermodynamic Properties of Water + Tetrahydrofuran and Water + 1,4-Dioxane Mixtures at (303.15, 313.15, and 323.15) K
ρl 877.30 kg/m3 303.15 Thermodynamic and acoustic properties of binary mixtures of oxolane with aniline and substituted anilines at 303.15, 313.15 and 323.15 K
ρl 877.50 kg/m3 303.15 Density, Viscosity, Refractive Index, and Speed of Sound in the Binary Mixtures of Tri-n-butylamine + Triethylamine, + Tetrahydrofuran, + Tetradecane, + Tetrachloroethylene, + Pyridine, or + Trichloroethylene at (298.15, 303.15, and 308.15) K
ρl 876.57 kg/m3 303.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
ρl 877.70 kg/m3 303.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
ρl 877.60 kg/m3 303.15 Volumetric properties of binary mixtures of N-ethylformamide with tetrahydrofuran, 2-butanone and ethylacetate from (293.15 to 313.15) K
ρl 876.90 kg/m3 303.15 Thermodynamic and acoustic properties of binary mixtures of ethers. III. Diisopropyl ether or oxolane with o- or m-toluidines at 303.15, 313.15 and 323.15 K
ρl 876.57 kg/m3 303.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
ρl 874.00 kg/m3 308.00 Densities, ultrasonic speeds and refractive indices of phenetole with N-methyl-2-pyrrolidone, N,N-dimethylformamide and tetrahydrofuran binary mixtures at different temperatures
ρl 871.50 kg/m3 308.15 Studies on Thermodynamic and Transport Properties of Binary Mixtures of Acetonitrile with Some Cyclic Ethers at Different Temperatures by Volumetric, Viscometric, and Interferometric Techniques
ρl 871.20 kg/m3 308.15 Densities, Viscosities, and Sound Speeds of Some Acetate Salts in Binary Mixtures of Tetrahydrofuran and Methanol at (303.15, 313.15, and 323.15) K
ρl 871.33 kg/m3 308.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
ρl 871.01 kg/m3 308.15 Excess molar volume, viscosity, and refractive index study for the ternary mixture {2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3)} at different temperatures. Application of the ERAS-model and Peng Robinson Stryjek Vera equation of state
ρl 871.01 kg/m3 308.15 Phenomenon of "negative partial molar expansibility" of water in tetrahydrofuran: How plausible is it? Discussion on the paper "Volumetric properties on the (tetrahydrofuran + water) and (tetra-n-butylammonium bromide + water) systems: Experimental measurements and correlations" by Veronica Belandria, Ammir H. Mohammadi and Dominique Richon [J. Chem. Thermodyn. 41 (2009) 1382 1386]
ρl 871.04 kg/m3 308.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
ρl 872.02 kg/m3 308.15 Volumetric properties of binary mixtures of N-ethylformamide with tetrahydrofuran, 2-butanone and ethylacetate from (293.15 to 313.15) K
ρl 871.04 kg/m3 308.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
ρl 872.16 kg/m3 308.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
ρl 870.85 kg/m3 308.15 Viscosity Behavior of Some Oxygen Containing Compounds
ρl 871.20 kg/m3 308.15 Density, Viscosity, Refractive Index, and Speed of Sound in the Binary Mixtures of Tri-n-butylamine + Triethylamine, + Tetrahydrofuran, + Tetradecane, + Tetrachloroethylene, + Pyridine, or + Trichloroethylene at (298.15, 303.15, and 308.15) K
ρl 873.00 kg/m3 308.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
ρl 871.16 kg/m3 308.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
ρl 871.00 kg/m3 308.15 Ultrasonic and Volumetric Properties of 1-Ethyl-3-methylimidazolium Trifluoromethanesulfonate Ionic Liquid with 2-Propanol or Tetrahydrofuran at Several Temperatures
ρl 870.99 kg/m3 308.15 Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
ρl 870.98 kg/m3 308.15 To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure
ρl 870.96 kg/m3 308.15 Volumetric Properties of Binary Mixtures Containing Ionic Liquids and Some Aprotic Solvents
ρl 872.28 kg/m3 308.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
ρl 872.14 kg/m3 308.15 Temperature and concentration dependence of volumetric properties of (tetrahydrofuran + methyl acrylate, or + ethyl acrylate, or + n-butyl acrylate, or + tert-butyl acrylate) binary mixtures
ρl 871.38 kg/m3 308.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
ρl 866.90 kg/m3 313.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
ρl 865.36 kg/m3 313.15 Densities and Viscosities of the Binary Mixtures of Tetrahydrofuran with Isomeric Chlorobutanes at 298.15 K and 313.15 K
ρl 865.70 kg/m3 313.15 Thermodynamic and acoustic properties of binary mixtures of ethers. V. Diisopropyl ether or oxolane with 2- or 3-chloroanilines at 303.15, 313.15 and 323.15 K
ρl 865.70 kg/m3 313.15 Thermodynamic and acoustic properties of binary mixtures of ethers. III. Diisopropyl ether or oxolane with o- or m-toluidines at 303.15, 313.15 and 323.15 K
ρl 865.82 kg/m3 313.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
ρl 866.23 kg/m3 313.15 Volumetric properties of binary mixtures of N-ethylformamide with tetrahydrofuran, 2-butanone and ethylacetate from (293.15 to 313.15) K
ρl 866.71 kg/m3 313.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
ρl 867.19 kg/m3 313.15 Temperature and concentration dependence of volumetric properties of (tetrahydrofuran + methyl acrylate, or + ethyl acrylate, or + n-butyl acrylate, or + tert-butyl acrylate) binary mixtures
ρl 866.58 kg/m3 313.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
ρl 867.20 kg/m3 313.15 Thermodynamic and acoustic properties of binary mixtures of oxolane with aniline and substituted anilines at 303.15, 313.15 and 323.15 K
ρl 865.70 kg/m3 313.15 Thermodynamic and acoustic properties of binary mixtures of ethers. IV. Diisopropyl ether or oxolane with N,N-dimethylaniline or N,Ndiethylaniline at 303.15, 313.15 and 323.15 K
ρl 865.38 kg/m3 313.15 Experimental and predicted viscosities of binary mixtures of cyclic ethers with 1-chloropentane or 1-chlorohexane at 283.15, 298.15, and 313.15K
ρl 865.95 kg/m3 313.15 Excess Enthalpy, Excess Volume, Viscosity Deviation, and Speed of Sound Deviation for the Mixture Tetrahydrofuran + 2,2,2-Trifluoroethanol at (283.15, 298.15, and 313.15) K
ρl 865.36 kg/m3 313.15 Isothermal vapour-liquid equilibrium for cyclic ethers with 1-chloropentane
ρl 865.41 kg/m3 313.15 To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure
ρl 865.65 kg/m3 313.15 Thermodynamic Properties of Water + Tetrahydrofuran and Water + 1,4-Dioxane Mixtures at (303.15, 313.15, and 323.15) K
ρl 859.84 kg/m3 318.15 Ultrasonic and Volumetric Properties of 1-Ethyl-3-methylimidazolium Trifluoromethanesulfonate Ionic Liquid with 2-Propanol or Tetrahydrofuran at Several Temperatures
ρl 860.80 kg/m3 318.15 Studies on Thermodynamic and Transport Properties of Binary Mixtures of Acetonitrile with Some Cyclic Ethers at Different Temperatures by Volumetric, Viscometric, and Interferometric Techniques
ρl 859.84 kg/m3 318.15 Phenomenon of "negative partial molar expansibility" of water in tetrahydrofuran: How plausible is it? Discussion on the paper "Volumetric properties on the (tetrahydrofuran + water) and (tetra-n-butylammonium bromide + water) systems: Experimental measurements and correlations" by Veronica Belandria, Ammir H. Mohammadi and Dominique Richon [J. Chem. Thermodyn. 41 (2009) 1382 1386]
ρl 861.11 kg/m3 318.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
ρl 862.23 kg/m3 318.15 Temperature and concentration dependence of volumetric properties of (tetrahydrofuran + methyl acrylate, or + ethyl acrylate, or + n-butyl acrylate, or + tert-butyl acrylate) binary mixtures
ρl 861.40 kg/m3 318.15 Densities, Viscosities, and Sound Speeds of Some Acetate Salts in Binary Mixtures of Tetrahydrofuran and Methanol at (303.15, 313.15, and 323.15) K
ρl 860.96 kg/m3 318.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
ρl 859.81 kg/m3 318.15 To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure
ρl 860.21 kg/m3 318.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
ρl 859.96 kg/m3 318.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
ρl 856.60 kg/m3 323.15 Thermodynamic and acoustic properties of binary mixtures of oxolane with aniline and substituted anilines at 303.15, 313.15 and 323.15 K
ρl 857.10 kg/m3 323.15 Thermodynamic and acoustic properties of binary mixtures of oxolane with aniline and substituted anilines at 303.15, 313.15 and 323.15 K
ρl 855.29 kg/m3 323.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
ρl 854.56 kg/m3 323.15 Volumetric and viscometric behavior of the binary systems ethyl lactate + 1,2- propanediol, + 1,3-propanediol, + tetrahydrofuran and + tetraethylene glycol dimethyl ether. New UNIFAC-VISCO and ASOG-VISCO parameters determination
ρl 854.30 kg/m3 323.15 Thermodynamic Properties of Water + Tetrahydrofuran and Water + 1,4-Dioxane Mixtures at (303.15, 313.15, and 323.15) K
ρl 854.80 kg/m3 323.15 Thermodynamic and acoustic properties of binary mixtures of ethers. V. Diisopropyl ether or oxolane with 2- or 3-chloroanilines at 303.15, 313.15 and 323.15 K
ρl 855.46 kg/m3 323.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
ρl 854.80 kg/m3 323.15 Thermodynamic and acoustic properties of binary mixtures of ethers. III. Diisopropyl ether or oxolane with o- or m-toluidines at 303.15, 313.15 and 323.15 K
ρl 854.80 kg/m3 323.15 Thermodynamic and acoustic properties of binary mixtures of ethers. IV. Diisopropyl ether or oxolane with N,N-dimethylaniline or N,Ndiethylaniline at 303.15, 313.15 and 323.15 K
ρl 848.68 kg/m3 328.15 Isothermal vapour-liquid equilibrium for cyclic ethers with 1-chloropentane
ρl 865.36 kg/m3 328.15 Isothermal (vapour + liquid) equilibrium of (cyclic ethers + chlorohexane) mixtures: Experimental results and SAFT modelling
ΔfusS [51.80; 51.83] J/mol×K [164.76; 164.76] Show Hide
ΔfusS 51.80 J/mol×K 164.76 NISTLebedev, Rabinovich, et al., 1978
ΔfusS 51.83 J/mol×K 164.76 NISTLebedev and Lityagov, 1977
ΔfusS 51.80 J/mol×K 164.76 NISTLebedev, Rabinovich, et al., 1978, 2
csound,fluid [1161.74; 1374.98] m/s [278.15; 323.15] Show Hide
csound,fluid 1374.98 m/s 278.15 Ultrasonic and Volumetric Properties of 1-Ethyl-3-methylimidazolium Trifluoromethanesulfonate Ionic Liquid with 2-Propanol or Tetrahydrofuran at Several Temperatures
csound,fluid 1348.80 m/s 283.15 Excess Enthalpy, Excess Volume, Viscosity Deviation, and Speed of Sound Deviation for the Mixture Tetrahydrofuran + 2,2,2-Trifluoroethanol at (283.15, 298.15, and 313.15) K
csound,fluid 1325.78 m/s 288.15 Ultrasonic and Volumetric Properties of 1-Ethyl-3-methylimidazolium Trifluoromethanesulfonate Ionic Liquid with 2-Propanol or Tetrahydrofuran at Several Temperatures
csound,fluid 1323.10 m/s 288.15 Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures
csound,fluid 1302.00 m/s 293.00 Ultrasonic velocity, viscosity and excess properties of binary mixture of tetrahydrofuran with 1-propanol and 2-propanol
csound,fluid 1305.00 m/s 293.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
csound,fluid 1304.63 m/s 293.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
csound,fluid 1301.90 m/s 293.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
csound,fluid 1278.00 m/s 298.00 Densities, ultrasonic speeds and refractive indices of phenetole with N-methyl-2-pyrrolidone, N,N-dimethylformamide and tetrahydrofuran binary mixtures at different temperatures
csound,fluid 1278.49 m/s 298.15 Volumetric and compressibility behaviour of ionic liquid, 1-n-butyl-3-methylimidazolium hexafluorophosphate and tetrabutylammonium hexafluorophosphate in organic solvents at T = 298.15 K
at 1 kPa
csound,fluid 1292.20 m/s 298.15 Studies on Thermodynamic and Transport Properties of Binary Mixtures of Acetonitrile with Some Cyclic Ethers at Different Temperatures by Volumetric, Viscometric, and Interferometric Techniques
at 1 kPa
csound,fluid 1268.00 m/s 298.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
csound,fluid 1277.60 m/s 298.15 Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures
csound,fluid 1280.10 m/s 298.15 Densities, speeds of sound and viscosities of binary mixtures of tetrahydrofuran with 1-hexanol, 1-octanol and 1-decanol at T = (298.15 to 313.15) K
at 1 kPa
csound,fluid 1277.50 m/s 298.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
csound,fluid 1280.48 m/s 298.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
csound,fluid 1278.49 m/s 298.15 Volumetric Properties of the Ionic Liquid, 1-Butyl-3-methylimidazolium Tetrafluoroborate, in Organic Solvents at T = 298.15 K
at 1 kPa
csound,fluid 1276.60 m/s 298.15 Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures
csound,fluid 1277.37 m/s 298.15 Ultrasonic and Volumetric Properties of 1-Ethyl-3-methylimidazolium Trifluoromethanesulfonate Ionic Liquid with 2-Propanol or Tetrahydrofuran at Several Temperatures
csound,fluid 1279.00 m/s 298.15 Densities, Viscosities, and Sound Speeds of Some Acetate Salts in Binary Mixtures of Tetrahydrofuran and Methanol at (303.15, 313.15, and 323.15) K
at 1 kPa
csound,fluid 1280.20 m/s 298.15 Compressibility Studies of Binary Solutions Involving Water as a Solute in Nonaqueous Solvents at T ) 298.15 K
at 1 kPa
csound,fluid 1278.24 m/s 298.15 Viscosity, Density, Speed of Sound, and Refractive Index of Binary Mixtures of Organic Solvent + Ionic Liquid, 1-Butyl-3-methylimidazolium Hexafluorophosphate at 298.15 K
at 1 kPa
csound,fluid 1280.82 m/s 298.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
csound,fluid 1279.00 m/s 298.15 Excess Enthalpy, Excess Volume, Viscosity Deviation, and Speed of Sound Deviation for the Mixture Tetrahydrofuran + 2,2,2-Trifluoroethanol at (283.15, 298.15, and 313.15) K
csound,fluid 1288.00 m/s 298.15 Density, Viscosity, Refractive Index, and Speed of Sound in the Binary Mixtures of Tri-n-butylamine + Triethylamine, + Tetrahydrofuran, + Tetradecane, + Tetrachloroethylene, + Pyridine, or + Trichloroethylene at (298.15, 303.15, and 308.15) K
at 1 kPa
csound,fluid 1254.00 m/s 303.00 Ultrasonic velocity, viscosity and excess properties of binary mixture of tetrahydrofuran with 1-propanol and 2-propanol
csound,fluid 1254.00 m/s 303.00 Densities, ultrasonic speeds and refractive indices of phenetole with N-methyl-2-pyrrolidone, N,N-dimethylformamide and tetrahydrofuran binary mixtures at different temperatures
csound,fluid 1256.43 m/s 303.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
csound,fluid 1254.00 m/s 303.15 Thermodynamic and acoustic properties of binary mixtures of ethers. IV. Diisopropyl ether or oxolane with N,N-dimethylaniline or N,Ndiethylaniline at 303.15, 313.15 and 323.15 K
csound,fluid 1252.20 m/s 303.15 Unravelling various types of non-covalent interactions of benzyl amine with ethers in n-hexane at 303.15 K by ultrasonic and DFT methods
at 1 kPa
csound,fluid 1255.00 m/s 303.15 Densities, speeds of sound, isentropic compressibilities, refractive indexes, and viscosities of tetrahydrofuran with haloalkane or alkyl ethanoate at T = 303.15 K
at 1 kPa
csound,fluid 1256.00 m/s 303.15 Thermodynamic and acoustic properties of binary mixtures of oxolane with aniline and substituted anilines at 303.15, 313.15 and 323.15 K
csound,fluid 1248.00 m/s 303.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
csound,fluid 1256.80 m/s 303.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
csound,fluid 1254.00 m/s 303.15 Thermodynamic and acoustic properties of binary mixtures of ethers. III. Diisopropyl ether or oxolane with o- or m-toluidines at 303.15, 313.15 and 323.15 K
csound,fluid 1254.00 m/s 303.15 Thermodynamic and acoustic properties of binary mixtures of ethers. V. Diisopropyl ether or oxolane with 2- or 3-chloroanilines at 303.15, 313.15 and 323.15 K
csound,fluid 1253.20 m/s 303.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
csound,fluid 1230.00 m/s 308.00 Densities, ultrasonic speeds and refractive indices of phenetole with N-methyl-2-pyrrolidone, N,N-dimethylformamide and tetrahydrofuran binary mixtures at different temperatures
csound,fluid 1229.00 m/s 308.15 Acoustic and Volumetric Properties of Binary Mixtures of Ionic Liquid 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide with Acetonitrile and Tetrahydrofuran
csound,fluid 1228.00 m/s 308.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
csound,fluid 1231.70 m/s 308.15 Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures
csound,fluid 1231.50 m/s 308.15 Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures
csound,fluid 1232.53 m/s 308.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
csound,fluid 1229.61 m/s 308.15 Ultrasonic and Volumetric Properties of 1-Ethyl-3-methylimidazolium Trifluoromethanesulfonate Ionic Liquid with 2-Propanol or Tetrahydrofuran at Several Temperatures
csound,fluid 1232.88 m/s 308.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
csound,fluid 1202.00 m/s 313.00 Ultrasonic velocity, viscosity and excess properties of binary mixture of tetrahydrofuran with 1-propanol and 2-propanol
csound,fluid 1209.17 m/s 313.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
csound,fluid 1212.00 m/s 313.15 Densities, Viscosities, and Sound Speed of Binary Mixtures of Hexyl Acetate with Tetrahydrofuran, 1,4-Dioxane, Anisole, and Butyl Vinyl Ether
csound,fluid 1204.80 m/s 313.15 Excess Enthalpy, Excess Volume, Viscosity Deviation, and Speed of Sound Deviation for the Mixture Tetrahydrofuran + 2,2,2-Trifluoroethanol at (283.15, 298.15, and 313.15) K
csound,fluid 1207.00 m/s 313.15 Thermodynamic and acoustic properties of binary mixtures of ethers. IV. Diisopropyl ether or oxolane with N,N-dimethylaniline or N,Ndiethylaniline at 303.15, 313.15 and 323.15 K
csound,fluid 1212.00 m/s 313.15 Thermodynamic and acoustic properties of binary mixtures of oxolane with aniline and substituted anilines at 303.15, 313.15 and 323.15 K
csound,fluid 1208.78 m/s 313.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
csound,fluid 1207.00 m/s 313.15 Thermodynamic and acoustic properties of binary mixtures of ethers. V. Diisopropyl ether or oxolane with 2- or 3-chloroanilines at 303.15, 313.15 and 323.15 K
csound,fluid 1207.00 m/s 313.15 Thermodynamic and acoustic properties of binary mixtures of ethers. III. Diisopropyl ether or oxolane with o- or m-toluidines at 303.15, 313.15 and 323.15 K
csound,fluid 1182.37 m/s 318.15 Ultrasonic and Volumetric Properties of 1-Ethyl-3-methylimidazolium Trifluoromethanesulfonate Ionic Liquid with 2-Propanol or Tetrahydrofuran at Several Temperatures
csound,fluid 1187.20 m/s 318.15 Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures
csound,fluid 1185.25 m/s 318.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
csound,fluid 1186.40 m/s 318.15 Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures
csound,fluid 1185.68 m/s 318.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
csound,fluid 1162.31 m/s 323.15 Investigation on thermophysical and excess properties of binary mixtures of imidazolium based ionic liquids at temperatures (293.15 to 323.15) K: III [Cnmim][PF6] (n = 4, 6, 8) + THF
csound,fluid 1161.74 m/s 323.15 Experimental and theoretical excess molar properties of imidazolium based ionic liquids with molecular organic solvents I. 1-Hexyl-3- methylimidazlouim tetraflouroborate and 1-octyl-3-methylimidazlouim tetraflouroborate with cyclic ethers
csound,fluid 1165.00 m/s 323.15 Thermodynamic and acoustic properties of binary mixtures of ethers. V. Diisopropyl ether or oxolane with 2- or 3-chloroanilines at 303.15, 313.15 and 323.15 K
csound,fluid 1165.00 m/s 323.15 Thermodynamic and acoustic properties of binary mixtures of ethers. IV. Diisopropyl ether or oxolane with N,N-dimethylaniline or N,Ndiethylaniline at 303.15, 313.15 and 323.15 K
csound,fluid 1165.00 m/s 323.15 Thermodynamic and acoustic properties of binary mixtures of ethers. III. Diisopropyl ether or oxolane with o- or m-toluidines at 303.15, 313.15 and 323.15 K
csound,fluid 1171.00 m/s 323.15 Thermodynamic and acoustic properties of binary mixtures of oxolane with aniline and substituted anilines at 303.15, 313.15 and 323.15 K
γ [0.03; 0.03] N/m [288.15; 313.15] Show Hide
γ 0.03 N/m 288.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
γ 0.03 N/m 293.15 Thermodynamic surface properties of [BMIm][NTf2] or [EMIm][NTf2] binary mixtures with tetrahydrofuran, acetonitrile or dimethylsulfoxide
γ 0.03 N/m 293.15 Surface Tensions and the Gibbs Excess Surface Concentration of Binary Mixtures of the Ionic Liquid 1-Ethyl-3-methylimidazolium Bis[(trifluoromethyl)sulfonyl]imide with Tetrahydrofuran and Acetonitrile
γ 0.03 N/m 298.15 Surface Tension of Mixtures of Tetrahydrofuran or Tetrahydropyran with Isomeric Chlorobutanes
γ 0.03 N/m 298.15 NCMS SOLV-DB
γ 0.03 N/m 298.15 Thermodynamic surface properties of [BMIm][NTf2] or [EMIm][NTf2] binary mixtures with tetrahydrofuran, acetonitrile or dimethylsulfoxide
γ 0.03 N/m 298.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
γ 0.03 N/m 298.15 Excess Molar volumes and Surface Tensions of Trimethylbenzene with Tetrahydrofuran Tetrachloromethane and Dimethylsulfoxide at 298.15 K
γ 0.03 N/m 298.15 Study of the Surface Tension of Chlorocyclohexane or Bromocyclohexane with Some Cyclic Ethers
γ 0.03 N/m 298.15 Surface Tensions and the Gibbs Excess Surface Concentration of Binary Mixtures of the Ionic Liquid 1-Ethyl-3-methylimidazolium Bis[(trifluoromethyl)sulfonyl]imide with Tetrahydrofuran and Acetonitrile
γ 0.03 N/m 303.13 Surface Tensions and the Gibbs Excess Surface Concentration of Binary Mixtures of the Ionic Liquid 1-Ethyl-3-methylimidazolium Bis[(trifluoromethyl)sulfonyl]imide with Tetrahydrofuran and Acetonitrile
γ 0.03 N/m 303.15 Thermodynamic surface properties of [BMIm][NTf2] or [EMIm][NTf2] binary mixtures with tetrahydrofuran, acetonitrile or dimethylsulfoxide
γ 0.03 N/m 308.15 Surface Tensions and the Gibbs Excess Surface Concentration of Binary Mixtures of the Ionic Liquid 1-Ethyl-3-methylimidazolium Bis[(trifluoromethyl)sulfonyl]imide with Tetrahydrofuran and Acetonitrile
γ 0.03 N/m 308.15 Thermodynamic surface properties of [BMIm][NTf2] or [EMIm][NTf2] binary mixtures with tetrahydrofuran, acetonitrile or dimethylsulfoxide
γ 0.03 N/m 308.15 Densities, Viscosities, Refractive Indexes, and Surface Tensions for Binary and Ternary Mixtures of Tetrahydofuran, 2-Propanol, and 2,2,4-Trimethylpentane
γ 0.03 N/m 313.15 Study of the Surface Tension of Chlorocyclohexane or Bromocyclohexane with Some Cyclic Ethers
γ 0.03 N/m 313.15 Surface Tension of Mixtures of Tetrahydrofuran or Tetrahydropyran with Isomeric Chlorobutanes

Pressure Dependent Properties

Property Value Unit Pressure (kPa) Source
Tboil(P) 339.15 K 96.60 Low cost apparatus for rapid boiling point determination of small air sensitive samples under inert atmosphere

Datasets

  1. Viscosity, Pa*s (6)
  2. Refractive index (Na D-line) (1)
  3. Mass density, kg/m3 (2)

Viscosity, Pa*s

Fixed Measured
Temperature, K - Liquid Pressure, kPa - Liquid Viscosity, Pa*s - Liquid
333.20 10200.00 0.0004
Reference
Fixed Measured
Temperature, K - Liquid Pressure, kPa - Liquid Viscosity, Pa*s - Liquid
288.15 101.00 0.0005
Reference
Fixed Measured
Pressure, kPa - Liquid Temperature, K - Liquid Viscosity, Pa*s - Liquid
85.90 298.15 0.0004
Reference
Fixed Measured
Temperature, K - Liquid Pressure, kPa - Liquid Viscosity, Pa*s - Liquid
303.15 101.33 0.0005
Reference
Fixed Measured
Temperature, K - Liquid Pressure, kPa - Liquid Viscosity, Pa*s - Liquid
303.15 101.33 0.0004
Reference
Fixed Measured
Temperature, K - Liquid Pressure, kPa - Liquid Viscosity, Pa*s - Liquid
303.15 101.33 0.0003
Reference

Refractive index (Na D-line)

Fixed Measured
Pressure, kPa - Liquid Temperature, K - Liquid Refractive index (Na D-line) - Liquid
85.90 298.15 1.4047
Reference

Mass density, kg/m3

Fixed Measured
Temperature, K - Liquid Pressure, kPa - Liquid Mass density, kg/m3 - Liquid
333.20 10200.00 850.8
Reference
Fixed Measured
Pressure, kPa - Liquid Temperature, K - Liquid Mass density, kg/m3 - Liquid
85.90 298.15 882.02
Reference

Correlations

Property Value Unit Temperature (K) Source
Cp,gas [44.72; 255.84] J/mol×K [150.00; 1500.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is Cp,gas in J/mol×K, T in K
Coefficient A4.16160e+01
Coefficient B-7.44850e+02
Coefficient C6.14024e+00
Coefficient D-2.96160e-04
Coefficient E7.44860e-08
Temperature range, min.150.00
Temperature range, max.1500.00
Cp,gas 44.72 J/mol×K 150.00 Calculated Property
Cp,gas 77.32 J/mol×K 300.00 Calculated Property
Cp,gas 120.41 J/mol×K 450.00 Calculated Property
Cp,gas 156.96 J/mol×K 600.00 Calculated Property
Cp,gas 185.20 J/mol×K 750.00 Calculated Property
Cp,gas 206.69 J/mol×K 900.00 Calculated Property
Cp,gas 223.25 J/mol×K 1050.00 Calculated Property
Cp,gas 236.31 J/mol×K 1200.00 Calculated Property
Cp,gas 246.91 J/mol×K 1350.00 Calculated Property
Cp,gas 255.84 J/mol×K 1500.00 Calculated Property
Property Value Unit Temperature (K) Source
Cp,liquid [107.43; 135.79] J/mol×K [164.65; 339.12] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is Cp,liquid in J/mol×K, T in K
Coefficient A8.33510e+01
Coefficient B7.74140e+02
Coefficient C-6.52503e+00
Coefficient D3.62550e-02
Coefficient E-3.55900e-05
Temperature range, min.164.65
Temperature range, max.339.12
Cp,liquid 107.43 J/mol×K 164.65 Calculated Property
Cp,liquid 106.65 J/mol×K 184.04 Calculated Property
Cp,liquid 107.47 J/mol×K 203.42 Calculated Property
Cp,liquid 109.41 J/mol×K 222.81 Calculated Property
Cp,liquid 112.27 J/mol×K 242.19 Calculated Property
Cp,liquid 115.90 J/mol×K 261.58 Calculated Property
Cp,liquid 120.21 J/mol×K 280.96 Calculated Property
Cp,liquid 125.07 J/mol×K 300.35 Calculated Property
Cp,liquid 130.33 J/mol×K 319.73 Calculated Property
Cp,liquid 135.79 J/mol×K 339.12 Calculated Property
Property Value Unit Temperature (K) Source
η [0.0055165; 0.0001696] Pa×s [164.65; 440.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = exp(A + B/T + C·ln(T) + D·T^E)
Y is η in Pa×s, T in K
Coefficient A-1.00470e+01
Coefficient B8.96610e+02
Coefficient C-1.18640e-01
Coefficient D2.56250e-07
Coefficient E2.00000e+00
Temperature range, min.164.65
Temperature range, max.440.00
η 0.0055165 Pa×s 164.65 Calculated Property
η 0.0023095 Pa×s 195.24 Calculated Property
η 0.0012226 Pa×s 225.84 Calculated Property
η 0.0007528 Pa×s 256.43 Calculated Property
η 0.0005139 Pa×s 287.03 Calculated Property
η 0.0003776 Pa×s 317.62 Calculated Property
η 0.0002930 Pa×s 348.22 Calculated Property
η 0.0002369 Pa×s 378.81 Calculated Property
η 0.0001979 Pa×s 409.41 Calculated Property
η 0.0001696 Pa×s 440.00 Calculated Property
Property Value Unit Temperature (K) Source
ΔvapH [37.90; 0.66] kJ/mol [164.65; 540.15] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A·(1 − Tr)^(B + C·Tr + D·Tr² + E·Tr³), Tr = T/Tc
Y is ΔvapH in kJ/mol, T in K
Coefficient A4.77063e+01
Coefficient B8.30300e-01
Coefficient C-6.17577e-01
Coefficient D-2.53996e-01
Coefficient E5.01899e-01
Critical temperature, Tc (K)5.40200e+02
Temperature range, min.164.65
Temperature range, max.540.15
ΔvapH 37.90 kJ/mol 164.65 Calculated Property
ΔvapH 35.99 kJ/mol 206.37 Calculated Property
ΔvapH 34.19 kJ/mol 248.09 Calculated Property
ΔvapH 32.39 kJ/mol 289.82 Calculated Property
ΔvapH 30.46 kJ/mol 331.54 Calculated Property
ΔvapH 28.19 kJ/mol 373.26 Calculated Property
ΔvapH 25.31 kJ/mol 414.98 Calculated Property
ΔvapH 21.38 kJ/mol 456.71 Calculated Property
ΔvapH 15.53 kJ/mol 498.43 Calculated Property
ΔvapH 0.66 kJ/mol 540.15 Calculated Property
Property Value Unit Temperature (K) Source
Pvap [1.37e-04; 5167.31] kPa [164.65; 540.15] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = exp(A + B/T + C·ln(T) + D·T^E)
Y is Pvap in kPa, T in K
Coefficient A7.58357e+01
Coefficient B-6.23655e+03
Coefficient C-9.22114e+00
Coefficient D7.80890e-06
Coefficient E2.00000e+00
Temperature range, min.164.65
Temperature range, max.540.15
Pvap 1.37e-04 kPa 164.65 Calculated Property
Pvap 0.04 kPa 206.37 Calculated Property
Pvap 1.40 kPa 248.09 Calculated Property
Pvap 14.82 kPa 289.82 Calculated Property
Pvap 78.73 kPa 331.54 Calculated Property
Pvap 271.85 kPa 373.26 Calculated Property
Pvap 709.70 kPa 414.98 Calculated Property
Pvap 1538.20 kPa 456.71 Calculated Property
Pvap 2941.04 kPa 498.43 Calculated Property
Pvap 5167.31 kPa 540.15 Calculated Property
Pvap [1.27e-04; 5170.61] kPa [164.65; 540.15] KDB Vapor Pressure Data Show Hide
Equationln(Y) = A + B/T + C·ln(T) + D·T² + E/T²
Y is Pvap in kPa, T in K
Coefficient A7.83577e+01
Coefficient B-6.33998e+03
Coefficient C-9.60880e+00
Coefficient D8.18348e-06
Coefficient E0.00000e+00
Temperature range, min.164.65
Temperature range, max.540.15
Pvap 1.27e-04 kPa 164.65 Calculated Property
Pvap 0.04 kPa 206.37 Calculated Property
Pvap 1.38 kPa 248.09 Calculated Property
Pvap 14.80 kPa 289.82 Calculated Property
Pvap 78.83 kPa 331.54 Calculated Property
Pvap 272.18 kPa 373.26 Calculated Property
Pvap 709.91 kPa 414.98 Calculated Property
Pvap 1537.51 kPa 456.71 Calculated Property
Pvap 2939.69 kPa 498.43 Calculated Property
Pvap 5170.61 kPa 540.15 Calculated Property
Pvap [19.92; 269.76] kPa [296.29; 372.80] NIST Show Hide
Equationln(Y) = A + B/(T + C)
Y is Pvap in kPa, T in K
Coefficient A1.40945e+01
Coefficient B-2.76988e+03
Coefficient C-4.68180e+01
ReferenceScott D.W., 1970
CommentCoefficents calculated by NIST from author's data.
Temperature range, min.296.29
Temperature range, max.372.80
Pvap 19.92 kPa 296.29 Calculated Property
Pvap 28.72 kPa 304.79 Calculated Property
Pvap 40.45 kPa 313.29 Calculated Property
Pvap 55.78 kPa 321.79 Calculated Property
Pvap 75.45 kPa 330.29 Calculated Property
Pvap 100.28 kPa 338.80 Calculated Property
Pvap 131.15 kPa 347.30 Calculated Property
Pvap 169.01 kPa 355.80 Calculated Property
Pvap 214.86 kPa 364.30 Calculated Property
Pvap 269.76 kPa 372.80 Calculated Property
Property Value Unit Temperature (K) Source
ρl [1010.35; 330.34] kg/m3 [164.65; 540.15] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A / B^(1 + (1 − T/C)^D)
Y is ρl in kg/m3, T in K
Coefficient A7.59994e+01
Coefficient B2.57540e-01
Coefficient C5.40200e+02
Coefficient D2.67760e-01
Temperature range, min.164.65
Temperature range, max.540.15
ρl 1010.35 kg/m3 164.65 Calculated Property
ρl 972.48 kg/m3 206.37 Calculated Property
ρl 932.60 kg/m3 248.09 Calculated Property
ρl 890.21 kg/m3 289.82 Calculated Property
ρl 844.59 kg/m3 331.54 Calculated Property
ρl 794.64 kg/m3 373.26 Calculated Property
ρl 738.39 kg/m3 414.98 Calculated Property
ρl 671.93 kg/m3 456.71 Calculated Property
ρl 584.57 kg/m3 498.43 Calculated Property
ρl 330.34 kg/m3 540.15 Calculated Property
Property Value Unit Temperature (K) Source
γ [0.04; 2.81e-05] N/m [164.65; 535.64] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is γ in N/m, T in K
Coefficient A-3.68860e-02
Coefficient B4.45000e+00
Coefficient C-2.34120e+00
Coefficient D-9.81780e-04
Coefficient E-1.53490e-06
CommentRange stopped where the equation turns negative; ChemSep gives it to 540.15 K.
Temperature range, min.164.65
Temperature range, max.535.64
γ 0.04 N/m 164.65 Calculated Property
γ 0.04 N/m 205.87 Calculated Property
γ 0.03 N/m 247.09 Calculated Property
γ 0.03 N/m 288.31 Calculated Property
γ 0.02 N/m 329.54 Calculated Property
γ 0.02 N/m 370.76 Calculated Property
γ 0.01 N/m 411.98 Calculated Property
γ 0.01 N/m 453.20 Calculated Property
γ 0.00 N/m 494.42 Calculated Property
γ 2.81e-05 N/m 535.64 Calculated Property
Property Value Unit Temperature (K) Source
λgas [0.00; 0.13] W/m×K [164.65; 1000.00] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A·T^B / (1 + C/T + D/T²)
Y is λgas in W/m×K, T in K
Coefficient A1.04390e-05
Coefficient B1.44820e+00
Coefficient C7.29360e+02
Coefficient D-9.82930e+03
Temperature range, min.164.65
Temperature range, max.1000.00
λgas 0.00 W/m×K 164.65 Calculated Property
λgas 0.01 W/m×K 257.47 Calculated Property
λgas 0.02 W/m×K 350.28 Calculated Property
λgas 0.03 W/m×K 443.10 Calculated Property
λgas 0.04 W/m×K 535.92 Calculated Property
λgas 0.06 W/m×K 628.73 Calculated Property
λgas 0.07 W/m×K 721.55 Calculated Property
λgas 0.09 W/m×K 814.37 Calculated Property
λgas 0.11 W/m×K 907.18 Calculated Property
λgas 0.13 W/m×K 1000.00 Calculated Property
Property Value Unit Temperature (K) Source
λliquid [0.15; 0.09] W/m×K [164.65; 433.56] ChemSep v8.3 pure component data Compiled value Show Hide
EquationY = A + exp(B/T + C + D·T + E·T²)
Y is λliquid in W/m×K, T in K
Coefficient A-2.20850e-01
Coefficient B9.59710e+00
Coefficient C-9.94960e-01
Coefficient D-1.74150e-04
Coefficient E-6.49580e-07
Temperature range, min.164.65
Temperature range, max.433.56
λliquid 0.15 W/m×K 164.65 Calculated Property
λliquid 0.15 W/m×K 194.53 Calculated Property
λliquid 0.14 W/m×K 224.41 Calculated Property
λliquid 0.13 W/m×K 254.29 Calculated Property
λliquid 0.12 W/m×K 284.17 Calculated Property
λliquid 0.12 W/m×K 314.04 Calculated Property
λliquid 0.11 W/m×K 343.92 Calculated Property
λliquid 0.10 W/m×K 373.80 Calculated Property
λliquid 0.10 W/m×K 403.68 Calculated Property
λliquid 0.09 W/m×K 433.56 Calculated Property

Similar Compounds

Butane, 1-methoxy-. n-Butyl ether. Butane, 1,4-dimethoxy-. Butane, 1-propoxy-. Butane, 1-ethoxy-. Butane, 1,4-diethoxy-. 1,4-ethoxymethoxybutane. Tetrahydropyran. 4,9-Dioxa-1,12-dodecanedinitrile. Pentane, 1,5-dimethoxy-. 1-Butanol, 4-methoxy-. 1-(isobutoxy)butane. Pentane, 1-methoxy-. n-Amyl ether. Pentane, 1-butoxy-.

Find more compounds similar to Tetrahydrofuran.

Mixtures

Find more mixtures with Tetrahydrofuran.

Sources

Note: Cheméo is only indexing the data, follow the source links to retrieve the latest data. The source is also providing more information like the publication year, authors and more. Take the time to validate and double check the source of the data.
Outlier This icon means that the value is more than 2 standard deviations away from the property mean.
Calculated This icon marks a calculated value or equation: a prediction, not a measurement.
Compiled This icon marks a compiled value or equation: taken from a data compilation such as ChemSep, not from an original measurement report.
These property values are available through the Cheméo API. A free account gives you an access key.